Directorate Of Municipal Administration Tender

code04 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The graniteper trapper basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement and formwork shall be paid separately Mix 1:4:8 M5 Using 40 mm and down size graded crushed coarse aggregatePWD SR 2023 24 VOL 1 common SR, It.No.2.1.2,

code05 - Providing and laying in position Cement Concrete for all Foundation works.The graniteper trapper basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesPWD SR 2023 24 VOL 1 common SR,It.No. 2.2.1,

code06 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteper trapper basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Vol 1 SR 2023 24 P.No 15, I.No 2.5 and 2.5.1 sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates cum 6630.00

code07 - Supplying, fitting and placing TMT FE 550 per 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingper welding joints, tying with binding wire per soft annealed steel wire and other ancilary operations complete as per drawing and technical specification For Buildings PWD CSR 2023 24, Vol I, P. No. 18, I. No. 2.11 h All other type of structures

code08 - Appendix I Additionalities for Formwork, Centering and Scaffolding. Vol 1 SR 2023 24 , Sl. No.1B ,P.No.111 FOR PCC b. All other types COLUMN upto plinth

code09 - Appendix I Additionalities for Formwork, Centering and Scaffolding. Vol 1 SR 2023 24 , Sl. No.1B ,P.No.111 FOR PCC b. All other types COLUM ABOVE plinth

code10 - Appendix I Additionalities for Formwork Centering and Scaffolding. Vol1 SR 202324 ,Sl. No.1B ,P.No.111 FOR PCC b. All other types Plinth Beam sl no 1 a

code11 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgper cum and minimum compressive strength of 4.00 Nper msqm conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Vol II SR 2023 24 P.No 17 , I.No 6.32

code12 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings per wooden frames with rawl plugs screws etc.PWD SR 2023 24 VOL 2 It.No.11.34B P NO:86

code13 - Providing 20 mm cement plaster of mix :1:6 1 cement: 6 fine sand to brickper stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc tions of Engineer in charge. sqm 333.00Vol 2, Building SR 2023 24 It.No.8.3.2, P.No 41

code14 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With water thinnable cement primer on wall surface having VOC content less than 50 gper L as per specifications and as per directions of Engineer in charge. DSR 2023 24 Vol 2, It.No.8.55.2, P.no.51

code15 - Distempering with dry distemper of approved brand and manufacture two coats of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Vol 2 SR 2023 24 , It.No.8.24, P.No.45

code16 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90Lper 10 m² over an under coat of primer applied at 0.80 Lper 10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.sqm 139.00 volume 2, item.no: 8.33.3 P.No.47

code17 - Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenances required to complete the work.In all kinds of soils upto 300mm depth PWD DSR Volume ICommon SR 2023 24 It.No. 1.12, P.No. 8

code18 - Construction of Subgrade and Earthen Shoulders : Construction of sub grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300 2 Volume III R and B SR 2023 24 It.No.3.6, P.No. 17

code19 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paverper grader in sub base per base course on well prepared surfaceand compacting with vibratory roller to achieve the desired density PWD DSR 2023 24 Volume III Page No. 26 Item No.4.17

code20 - Providing and laying 60mm thick factory made precast M 30 grade Cement Concrete Paver Block as per IRC SP 63:2018 and IS 15658 for Cycle Tracks and Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer incharge. WMMper WBM Base to be paid separately if necessary as per relevant technical specification IRC SP 63: 2018 PWD DSR 2023 24 Vol 3, Item No. 6.8.1 page no 51

code21 - Providing and constructing un reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 sqm0 Grade , coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing , spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading and unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer in charge of the work.Vol 03 SR 2023 24, It.No.16.27, P.No.148