Directorate Of Municipal Administration Tender

code04 - Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingorwelding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification

code05 - Fabricating, supplying and erection of 12 ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 mors for 12m Pole in single section and single joint welded as per IS 9595orIS10178AWS having dimensions bottom 240 mm , top90mm with 3 mm thick, suitable base plate and 4Nos of long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 12 m - Top 90 mm and Bottom 240 mm dia

code06 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonateorclear glass material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70Percent, CCT more than 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire more than IK08. Power Factor more than0.9 with mains, Surge Protection- Min 5KV along with Over voltageor Overload, short circuitor miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50or60Hz application. Compliance to IS 10322or IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 120 W System Power consumption. LED Efficiencymore than 1301morw, nominal CRI more than75. Luminaire manufacturer should have in- house facility accredited by NABL or CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark or name shall be Engraved or Embossing on the die cast housing or Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeorNichiaor LumiledsorOsram make LED Source. 120Watt

code07 - Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M.S. pipe with 2” dia 1.5m long M.S. bracket all are welded with suiable angle using 6mm thick M.S. sheet, grip bolts and nuts as required suitable for 9 to 12 mtrs M.S. tubular pole with necessary two coats of approved painting, with all other accessories etc complete. Single bracket 1.5 Mtr. Length.

code08 - Wiring for lightingorpower ckt using one of FRLS PVC insulated 1100V grade multistrand copper conductor single core cable in concealed system of wiring with specified IS-694:1990 and confirming to attached GTP of GROUP A 2.5sqmm

code09 - Supplying LT ug cable having aluminium conductor P V C insulated, extruded inner sheathed, galvanised, Steel strip armoured cable with P V C outer sheathing 1.1 K V class -3.5 core 25sqmm, Group A

code10 - Labour charge for laying 1.1 kv class UG cable in existing trench GI pipe or Stone ware pipe,or on wallor on pole as required 25 to 75 sqmm

code11 - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed

code12 - Supplying and laying in position PVC pipe - OD 50mm and 6 Kgorsqcm

code13 - Supplying and fixing of 50mm dia Class “A” (medium duty) GI pipe of wall thickness not less than 3.25mm on poleorwallordrain crossing with necessary clamping arrangements for UG cable of 1.1 KV class.

code14 - Supply and Installation or Fixing or Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase or Three Phase Energy Meter in suitable base plate

code15 - Supply and fixing of 4pole power contactor with NOorNC contacts on existing woodorpanel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40A

code16 - Supplying and fixing of Porcelain fuse channel with cut out on existing woodenorpanel using necessary nuts, bolts and washers. 32A

code17 - Supplying and fixing regular MCB distribution boards on wallorood board or flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phaseor3 phaseorsingle door with powder coated painting Made out of 14 SWG MS enclosure. 4 Way SP and N Single door

code18 - Fixing halogenormetal halide or SVL or IL or LEDor floodlight fitting over existing pole or wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires

code19 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70Percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT more than 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire more than IK08. Power Factor more than0.9 with mains, Surge Protection- Min 5KV along with Over voltageor Overload, short circuitor miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50or60Hz application. Compliance to IS 10322orIEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 120W System Power consumption. LED Efficiencymore than1301morw, nominal CRI more than75. Luminaire manufacturer should have in-house facility accredited by NABLorCPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark orname shall be Engraved or Embossing on the die cast housingor Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeorNichiaor LumiledsorOsram make LED Source

code20 - Supplying and Fixing of 25mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole or wall using suitable clamps, bolts, and nuts and wiring using suitable capacity