Directorate Of Municipal Administration Tender

PWD SR 2023-24 Vol No.01 P.No.18 Sl No.211(h) - TMT Steel Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (.PWD SR 2023-24 Vol No.01 P.No.18 Sl No.211(h) Basic Rs- 79011.00 5%ASL- 3950.55 Total - 82961.55 8 Mtr Pole Dimension -0.016 Ton x8 Poles= 0.88+0.079=207

Addendum-I of vol 01, Sl no 03 of pg no 111 - Centering Work Centering, shuttering, formwork for foundation,sub structure of cross drainages. 5% of the finished concrete item rate ( Addendum-I of vol 01, Sl no 03 of pg no 111) Basic Rs- 6243 X 5% = 312.15 5%ASL- 15.60 Total - 327.75 8 Mtr Pole Dimension-4 X 0.46X1.54 =2.83 X8=7.47+ 4.95=12.42 Sq mtr

PWD SR 2023-24 Vol No.01 P.No.15 SI No. 2.1.6 - Concerete Providing and laying in position Reinforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) M20 design mix using 20mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24 Vol No.01 P.No.15 SI No. 2.1.6)) Basic Rs- 6243.00 5% ASL- 312.15 Total - 6555.15 8Mtr Pole Dimension 0.47 X 0.47 X 1.50= 0.33 Cum X 8= 2.64 +1.6=4.24Cum

PWD Ele SR 2023-24 Page No.13 Item code 4.6.2 - GI. bracket Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. 4.6.2) Single Arm Bracket with 1500 mm Standard 40/50 mm dia Basic Rate - 2100=00 ASL 5% - 0105=00 Total - 2205=00 PWD Ele SR 2023-24 Page No.13 Item code 4.6.2

PWD Ele SR 2023-24 Page No.13 Item code 4.6.5 - GI. bracket Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. 4.6.5) Double Arm Bracket with 1500 mm Standard 40/50 mm dia Basic Rate - 3300=00 ASL 5% - 0165=00 Total - 3465=00 PWD Ele SR 2023-24 Page No.13 Item code 4.6.5

PWD Ele SR 2023-24 Page No.6 Item code 2.5.2 - Flexible Multicore Cable Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 2.5.2) 3C x 1.5 mm2 Basic Rate - 72=00 ASL 5% - 3=60 Total - 75=60 PWD Ele SR 2023-24 Page No.6 Item code 2.5.2

PWD Ele SR 2023-24 Page No.5 Item code 2.3.4 - Copper wire Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.3.4) 4 mm2 Basic Rate - 63=00 ASL 5% - 3=15 Total - 66=15 PWD Ele SR 2023-24 Page No.5 Item code 2.3.4

PWD Ele SR 2023-24 Page No.45 Item code 11.8.4 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, deliveringsuperior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge rotection- Min 5KV along with Over voltage/Overload, short circuit misswiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 0322IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB.Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED ficiency130lm/w, nominal CRI 75.Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. 11.8.4 LED Street light 90W PWD Ele SR 2023-24 Page No.45 Item code 11.8.4

PWD Ele SR 2023-24 Page No.45 Item code 11.9.4 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, deliveringsuperior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge rotection- Min 5KV along with Over voltage/Overload, short circuit misswiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 0322IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB.Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED ficiency130lm/w, nominal CRI 75.Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Flood light Source. 11.9.4 LED light 90W PWD Ele SR 2023-24 Page No.45 Item code 11.9.4

PWD Ele SR 2023-24 Page No.45 Item code 11.8.4 - 12.5 Mtr Octogonal Pole Fabrication,Supplying,Erection,TestingandCommissioningof.mslongPolygonhighmastwithSingle/Multipletelescopicsectionshaving,(minimumoverlapdistanceof1.5timesoftopsection)thicknessasperBSEN10025grades355JO/ASTMA5720steelsheetplateforshaftsuitabletowithstandawindvelocityof47m/sasperIS875part3(asperGADrawing).BaseplateasperIS2062/ASTMA57250.ThemastshallbeGalvanizedinsingleHotdipasperBSENISO1461/ASTMA123withanaverage70micronsasperIS2629,andweldedasperBS5135 SingleLSeamjointThemastshallhave2 ayheadframewithdiecastLM6pulleys,stainlesssteelaxle,PhosphorusBronzebearingbushpressfittedwithseparateguidesfor2runsof5mmdia,stainlesssteelwireropeofAISI304grade7/19-core core,(FactorofSafetyasperTRno-7).2.5mm2EPRinsulatedPCPsheathedtrailingpowercablehousedinsidethebottomshaftofmastwithdoorhavinglockingarrangementThemastshallhaveanual/powertool(Suitablereversiblegearedmotoroperatingon230/415V,50Hz,shallbeprovideabove15Mtrmast)Themastshallhavelanternof2segments,suitablediawithmaxloadcarryingcapacityasperIS1239.ThemastshallbeerectedonexistingRCCfooting.Themastshallbesuppliedwith3mmthicktemplate,lightningarresterof1.2mlengthgalvanizedpipewithtoparrowfittedontopoftheheadframecoverandGLStypeaviationtwinlAfittingwithwiringcmplete.(excludingfoundation)asper technical data. 4.5.1) 12 m/12.5 m - Top 100 mm and Bottom 310 mm dia Basic Rate-131000.00,ASL 5%-6550. Total-137550 PWD Ele SR 2023-24 Page No.45 Item code 11.8.4

PWD Ele SR 2023-24 Page No.9 Item code 3.9 - Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. Basic Rate - 00=35 ASL 5% - 00=0175 Total - 00=3675 PWD Ele SR 2023-24 Page No.9 Item code 3.9

PWD Ele SR 2023-24 Page No.13 Item code 5.7.2 - Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32Amps Basic Rate - 241=00 ASL 5% - 12=05 Total - 253=05 PWD Ele SR 2023-24 Page No.13 Item code 5.7.2

PWD Ele SR 2023-24 Page No.14 Item code 5.13.2 - Contactor Switch Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 5.13.2) 40 Amps Basic Rate - 2258=00 ASL 5% - 112=90 Total - 2370=90 PWD Ele SR 2023-24 Page No.14 Item code 5.13.2

PWD Ele SR 2023-24 Page No.16 Item code 5.18.7 - MCB Switch Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5.18.7) 6-32 A TPN Basic Rate -1717=00 ASL 5% - 85=85 Total - 1802=85 PWD Ele SR 2023-24 Page No.16 Item code 5.18.7

PWD Ele SR 2023-24 Page No.20 Item code 5.47 - Timer Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. Basic Rate - 2315=00 ASL 5% - 115=75 Total - 2430=75 PWD Ele SR 2023-24 Page No.20 Item code 5.47

PWD Ele SR 2023-24 Page No.20 Item code 5.42.2 - MS Box Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements,with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 5.42.2) 16SWG Basic Rate - 00=43 ASL 5% - 00=0215 Total - 00=4515 PWD Ele SR 2023-24 Page No.20 Item code 5.42.2

PWD Ele SR 2023-24 Page No.19 Item code 5.41.1 - Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S.angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5.41.1) 40 x 40 x 6 mm Basic Rate - 305=00 ASL 5% - 15=25 Total - 320=25 PWD Ele SR 2023-24 Page No.19 Item code 5.41.1

PWD Ele SR 2023-24 Page No.2 Item code1.2.4 - PVC Pipe Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 1.2.4) 40 mm dia 2.5 mm thick Basic Rate - 147=00 ASL 5% - 7=35 Total - 154=35 PWD Ele SR 2023-24 Page No.2 Item code1.2.4

PWD Ele SR 2023-24 Page No.55 Item code 13.1.1 - GI bracket Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. 13.1.2) Using 32mm dia G.I.Pipe Basic Rate - 1045=00 ASL 5% - 52=25 Total - 1097=25 PWD Ele SR 2023-24 Page No.55 Item code 13.1.1

PWD Ele SR 2023-24 Page No.55 Item code 13.5 - LEd Fixing Charges Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. Basic Rate - 162=00 Wtg 5% - 8=10 Total - 170=10 PWD Ele SR 2023-24 Page No.55 Item code 13.5

Hescom SR 2023-24 Item code 32.05 (Material Cost) - UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 32.05) 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) Basic Rate - 141842=00 ASL 5% - 7092=10 Total - 148934=10 Hescom SR 2023-24 Item code 32.05 (Material Cost)

ESCOMs SR 2023-24 Item code 21.05 (Labour Cost) - UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 21.05) 2.5 to 25 Sqmm Basic Rate - 20886=00 ASL 5% - 1044=30 Total - 21930=30 ESCOMs SR 2023-24 Item code 21.05 (Labour Cost)

Sl No Item No 1.6.1. PWD Civil SR vol 1 page no 6 - Digging Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. 1.6.1) In all kinds of soils. Depth upto 1.50m Sl No Item No 1.6.1. PWD Civil SR vol 1 page no 6 Basic Rate - 484=00 ASL 5% - 24=20 Total - 508=20

PWD Civil SR vol 3 page no 12 - Digging Dismantling of Cement Concrete Pavement Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantled materials and stacking serviceable and unserviceable materials separately Sl No Item No 2.19. PWD Civil SR vol 3 page no 12 Basic Rate - 563=00 Wtg 5% - 28=15 Total - 591=15

escom SR 2023-24 Item code 25.a (Material Cost) - Earthing 25.a) GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete 25.a) Transformer grounding Basic Rate - 1729=00 ASL 5% - 86=45 Total - 1815=45 Hescom SR 2023-24 Item code 25.a (Material Cost)

Hescom SR 2023-24 Item code 25.a (Labour Cost) - Earthing 25.a) GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete 25.a) Transformer grounding Basic Rate - 949=00 ASL 5% - 47=45 Total - 996=45 Hescom SR 2023-24 Item code 25.a (Labour Cost)

ESCOMs SR 2023-24 (Material Charges) - Pot Head Sl No 35)Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable item no. 35.01) Up to 4C x 50 Sqmm ESCOMs SR 2023-24 (Material Charges) Basic Rate - 324=00 ASL 5% - 16=20 Total - 340=20

Item No.1(b) ESCOMs SR 2023-24 (Material Charges) - 1b) RCC Pole - 9 M Long, 145 Kg WL Item No.1(b) ESCOMs SR 2023-24 (Material Charges) Basic Rate - 7076=00 ASL 5% - 353=80 Total - 7429=80

Item No.I(b) ESCOMs SR 2023-24 (Labour Charges) - 1) b)RCC Pole - 9 Mtr Long, 145 Kg WL Item No.I(b) ESCOMs SR 2023-24 (Labour Charges) Basic Rate - 1742=00 ASL 5% - 87=10 Total - 1829=10

tem No.1(b) ESCOMs SR 2023-24 (Material Charges) - 1.1 Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. 1.1.1 Ordinary SoilItem No.1(b) ESCOMs SR 2023-24 (Material Charges) Basic Rate - 478=00 ASL 5% - 29=90 Total - 501=90

Item No 42.07 Hescom SR 2023-24 Material Charges) - ABC Cable 42) 1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995 B) 3x25 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral) Item No 42.07 Hescom SR 2023-24 Material Charges Basic Rate - 164831=00 ASL 5% - 8241=55 Total - 173072=55

Hescom Labour Charges SR 2023-24 Item No.24.01 - 34 )LABOUR for Aerial Bunched Conductor & Accessories Item No 24.01) Stringing of 11 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size 3x95 Sqmm + 1x70 Sqmm with Insulated Messenger Wire Hescom Labour Charges SR 2023-24 Item No.24.01 Basic Rate - 34765=00 ASL 5% - 1738=25 Total - 36503=25

Item No.43.19 . Hescom SR 2023-24 - Suspension Clamp Assembly 16 to 70 mm (Excluding pole clamp & Eye Hook ) Item No.43.19 . Hescom SR 2023-24 Basic Rate - 221=00 ASL 5% - 11=05 Total - 232=05

Hescom SR 2023-24 Labour Charges - Erection of Suspension Clamp - 25 to 95 Sqmm bare/Insulated messenger Hescom SR 2023-24 Labour Charges Basic Rate - 96=00 ASL 5% - 4=80 Total - 100=80

HECOM SR Item No.43.35 SR 2023-24 - Pole clamp for HT/LT AB cable .Item No.43.35 SR 2023-24 Basic Rate - 109=00 ASL 5% - 5=45 Total - 114=45

Item No.24.115 SR 2023-24 - Pole Clamp - 145 mm x 95 .Item No.24.115 SR 2023-24 Labour rate Basic Rate - 160=00 ASL 5% - 8=00 Total - 168=45

Item No. Hescom SR 2021-22 Material rate - Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sqmm Bare Messenger(Exclusive of Pole Clamp and Eye Hook) Item No. Hescom SR 2021-22 Material rate Basic Rate - 152=00 ASL 5% - 7=60 Total - 159=60

Item No. Hescom SR 2021-22 Labour rate - Erection of Anchor Clamp - 25 to 95 Sqmm insulated messenger with bracket Item No. Hescom SR 2021-22 Labour rate Basic Rate - 192=00 ASL 5% - 9=60 Total - 201=60

ESCOMs SR 2023-24 IItem code 26(a) - Base concreting A)Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR 2023-24, Volume - 1) a) For 11/9.5/9/8 M Pole (500x650x150 mm) Basic Rate - 312=00 ASL 5% - 15=60 Total - 327=60 ESCOMs SR 2023-24 IItem code 26(a)

ESCOMs SR 2023-24 IItem code 26(a) - Pole concreting (without coping) B)Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR 2023-24, Volume - 1) b) For 9 M Pole (650x500x1700 mm) Basic Rate - 3434=00 ASL 5% - 171=70 Total - 3605=70 ESCOMs SR 2023-24 IItem code 26(a)

ESCOMs SR 2023-24 IItem code 26(a) - Coping for Poles C)Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR 2023-24, Volume - 1) a) 150 mm around pole for an height of 300 mm for RCC/PSCC Pole (400x400x300 mm) Basic Rate - 312=00 ASL 5% - 15=60 Total - 327=60 ESCOMs SR 2023-24 IItem code 26(a)