Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2022-23/OW/WORK_INDENT131534Bid Award Id
ViewTender No
DMA/2022-23/OW/WORK_INDENT131534Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Wetmix Macadam (Plant mix Method) Providing, laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with grader in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying using Grader. I.No. 4.14 P.No.29 included 3% Area W
300
-
739746
Granual Providing and applying primer coat with SS1 Grade Bituminous Emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the reate of 0.90kg/m2 using mechanical menas. I.No.5.04 Volume III P.No.29 included 3% Area W
1375
-
21243.75
Providing and laying bituminous macadam with higher capacity hot mix plant using curshed aggregates of specified grading premixed with bituminou sbinder, transported to site laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. Vg-40 I .No 5.09 P.No.36 Note : 3% Weightage included Volume III
68.75
-
579246.25
Tack coat on cement concrete pavement providing and applying tack coat with Bituminous emulsion using emulsion pressure distributor at the rate of 0.30 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Sl.No. 5.02 Page No. 36
1375
-
25492.5
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. I No:21.A P-145 Included 3% Area w
55
-
599300.35
Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164:2015 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control I Over 10 cm in width no:8.13 P-56 included 3% Area w
56.25
-
8922.38
Earth work Excavation for foundation by manual means for all buildings, bridges, retaining walls, abutment piers and such similar works as per drawing and technical specifications, including setting out, providing shoring and strutting barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stackiing the selected earth for reuse in a radius of 50m and lift upto 1.5m including cost of labour, tools usage and other appurtenances required to complete the work. Item No. 1.3 P.No. 5 Volume I Note : 3% Weightage included
324
-
61974.72
Construction of sub grade and earthen shoulders with approved material otabined from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of talbe No. 300-2 compacting original ground supportin sub grade. Item No. 3.18 Morth 305 Page 15 Volume III Note : 3% Weightage included
1188
-
474772.32
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relevant IS codes machine mixed, laid in layers not exceeding 150mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour usage, charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately). Item No. 2.1.3 Page A67 Note : 3% Weightage included
81
-
479889.36
Providing and laying in Reinforced cement concrete for all basement and surface level works, return walls, retaining walls, sunken floors etc. The grnaite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers not exceeding 150mm thickness, well compacted using needle vibrators, providing weep hoels wherever necessary including all lead and lifts, cost of all materials of quality, labour, usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) I.No. 2.3.2 Page No.16 Note : 3% Weightage included
261
-
1900207.89
Providing Thermo- Mechanically Treated bar at Grade Fe Sood or More Steel reinforcement for RCC work including straightening cutting, bending, placing in position binding and anchoring to adjacent members wherever necessary complete as per design including cost of material, labour usage charges complete as per specification (The lamps and wastages shall not be measured separately Item No. 11.32 Volume II including 3% Waistage
15.6
-
1703208
Earth work Excavation for foundation by manual means for all buildings, bridges, retaining walls, abutment piers and such similar works as per drawing and technical specifications, including setting out, providing shoring and strutting barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stackiing the selected earth for reuse in a radius of 50m and lift upto 1.5m including cost of labour, tools usage and other appurtenances required to complete the work. Item No. 1.3 P.No. 5 Volume I Note : 3% Weightage included
10.8
-
2065.82
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relevant IS codes machine mixed, laid in layers not exceeding 150mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour usage, charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately). Item No. 2.1.3 Page A67 Note : 3% Weightage included
1.44
-
8531.37
Providing and laying in Reinforced cement concrete for all basement and surface level works, return walls, retaining walls, sunken floors etc. The grnaite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers not exceeding 150mm thickness, well compacted using needle vibrators, providing weep hoels wherever necessary including all lead and lifts, cost of all materials of quality, labour, usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) I.No. 2.3.2 Page No.A68 Note : 3% Weightage included
5.99
-
43610.14
Supplying, fitting and placing un coated TMT Fe 500 and above bar Reinforcement in Foundation compelte as per Drawing and Technical Specifications. I.No. 12.42 Page No. 110 Volumne III Note : 3% Weightage included
0.5
-
45464.72
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16 SWG (Pg. No.30, Sl No 5.42.2) (Size 35000Sq cm x 1 Nos)
35000
-
12250
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm (Pg. No. 30, SL No. 5.41.2)
6
-
1980
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440V A.C.50 Hz 12/24v D.C. Group A (Pg. No. 29, SI No. 5.38)
3
-
1290
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS 694 & confirming to latest amendments
10
-
700
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC-60898 5.32 Amp
10
-
4340
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC-60898 50.63 Amp
2
-
4794
Decorative Light poles: Fabricating, supplying and erection of 11 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for 11 Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom 200mm, top 70 mm with 3mm thick.The Pole Should be painted ashtetically using good quality Autocoat paint. The side pole should be 3 Mtr height 165mm dia, 3mm thick, having 1 Mtr perforeation from 1.5 mtr to 2.5 mtr Height. The polycarbonate pipe housed inside perforation along with color changing LED visible from all side foundation plate should be suitable to fix the 11 Mtr bend at side of this pole. The suitable aluminium head placed at the top including pole cover having 7 Watt LED bulb inside. Suitable 4 Nos of M-24 Long J-Bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65 micron as per ASTM-A123 and 153 etc., The pole height may be varied at bridge section. The Pole should be as shown in attached picture.(The rate approved order copy is enclosed)
6
-
432000
Supply of LED Streetlight with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with high transmission index, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%. CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains Current should not be greater than 0.1A to 0.7A & Surge Protection- Min 4 KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operates wide voltage range from 100V to 270V 50/60Hz application. Over load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 150.W System Power consumption.
14
-
172200
Fixing halogen/metal hallide/SVL/IL/ LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (Pg. No. 79, SI No. 14.5)
14
-
2450
Supplying of 1.1 KV LT UG cableXLPE or Heat resistant PVC insulated, PVC extruded, innear sheathed, armoured UG LT cable, as per IS 1554 (Part-1 ) or IS -7098 Part-1,Armouring Strip thickness in average +5% and resistivity 14 ohms /Kms (Max) as per IS-3975 4 Core x16.00
400
-
60000
Supplying of 1.1 KV LT UG cableXLPE or Heat resistant PVC insulated, PVC extruded, innear sheathed, armoured UG LT cable, as per IS 1554 (Part-1 ) or IS -7098 Part-1,Armouring Strip thickness in average +5% and resistivity 14 ohms /Kms (Max) as per IS-39753.5 Core x 25.00
25
-
4500
Supplying & drawing Flexible Multicore Cable Manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 - 1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts. 3 Core 2.5 Sq mm As per IS-694:1990 (Pg. No. 6, SI No. 2.5.8) 64 x 13
150
-
13500
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers etc. (Pg. No. 32, SI No. 5.48)
1
-
4030
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 - 70 Amps (Pg. No. 26, SI No. 5.13.3)
1
-
4200
Supplying and fixing HRC fuse units base on existing switch/panel board. 32A to 63Amps (Pg. No. 25, I No. 5.9.2)
3
-
750
Supplying and fixing HRC fuse link on existing switch fuse base. Upto 63Amps (Pg. No. 25, SI No. 5.10.1)
3
-
669
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 12 mm dia. (Pg. No. 40, SI No. 6.1)
4
-
11998.8
Supplying and running GI/Copper Conductor for grounding and (along with other wires in conduits system of wiring), using necessary suitable size clamps nails guttas,/ spacers etc 8SWG GI Wire. (P No 43-44, SI No. 6.18.3) 64 x 32
1000
-
19000
Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete. (As per Civil SR KSRB I-2, P-7) In soil (ordinary) (Pg. No. 41, SI No. 6.6.1) 60 x 50
400
-
30400
Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete. (As per Civil SR KSRB I-2, P-7)Asphalt Cutting (Pg. No. 41, SI No. 6.6.4) 4 x 50
50
-
5650
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 6 sqmm to 16 sqmm (Pg. No. 41, SI No. 6.5.1)
400
-
4752
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 25 sqmm to 75 sqmm (Pg. No. 41, SI No. 6.5.2)
50
-
775
Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 40mm (Pg. No. 41, SI No. 6.9.1) Supplying and fixing G.I. Pipe
50
-
16750
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 19/20mm (Pg. No. 42, SI No. 6.11.1)
2
-
136
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm Long Barrel (Pg. No. 43, SI No. 6.17.7)
2
-
240
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm (Pg. No. 43, SI No. 6.17.6)
70
-
60970
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm (Pg. No. 43, SI No. 6.17.2)
130
-
67600
Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets / Couplings / Tees / Bends/End -caps of same materials in existing trench as per IS 14930 part -II suitable for drawing underground cables .50 mm OD / 38 mm ID PWD SR 2014-15 ( SL No 7.20.3) (Pg . No. 63)
400
-
60400
Supplying and fixing of spiral earth electrodes as per sanctioned technical specifications as per ESCOM (Pg No 87, SI.No. 15.13)
20
-
9800
Supplying and running GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6 mm GI strips (Pg No.40, SI.No 6.3.2)
50
-
5750
Earthwork excavation for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in Hard Soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with all lead upto 50m after breaking of clods complete as per specifications. KBS 2.1 (b)/2.3.5 ( page no 6, I No 2.4 ) For Street Light Poles (for Single Poles) = 1.65 x 0.80 x 0.46 = 0.60 x 64 Nos.
1
-
4745
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements