Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 5,06,000Document Cost
Refer DocumentsTender Fee
₹ 5,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/OW/WORK_INDENT31344Tender No
DMA/2024-25/OW/WORK_INDENT31344Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
code04 - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.
109.95
488
53679.789
code05 - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 501 Grade-III
219.9
2562
563524.536
code06 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density
445.2
2635
1173444.804
code07 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates
248.67
6168
1533963.1689
code08 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
286.23
7341
2101454.8632
code09 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification
50.0052
92140
4607514.631692
code10 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
128.4
1267
162802.212
code11 - Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing membrane having elongation of more than 500% and having solid content of above 90% @ 1.6kg per m2 in 2 coats to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g/ m2. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.
892.2
914
816041.808
code12 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge
2291.359
364
835475.31858
code13 - Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete
562
1114
626326.52
code14 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.
66.899
5487
367131.00816
code15 - Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
322
337
108784.48
code16 - Providing and laying 20mm x 20mm glass mosaics of approved make or equivalent of approved colour and shade for water body laid over rcc surface with tile adhesive of BAL or equivalent make, tiles laid as per the pattern & design and as per manufacturer's specifications including neat grouting with epoxy materail as per architect's directions for pigment mixing, acid cleaning, curing etc., all in line, level complete
796.2
4150
3304230
code17 - Providing Water for testing, Dewatering & Pumping charges complete, (Market Rate)
872850
-
87285
code18 - Providing and laying in position Reinforced cement concrete M25 for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
19.299
7048
136022.43984
code19 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
12.049
10011
120629.7684
code20 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
4.98
11982
59670.8082
code21 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
11.399
11277
128549.48674
code22 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
34.7699
10572
367602.333857
code23 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
76.32
6580
502236.7344
code24 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
79.805
8457
674937.22065
code25 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
78.85
1137
89661.912
code26 - Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
150.4
1365
205413.312
code27 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.
513
188
96695.37
code28 - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately
11.34
4162
47199.6882
code29 - Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)
30
831
24936.3
code30 - FILTERTANK :- Supply of Imported fiber glass pressure sand filter AQUALUX make tank of dia 1600mm fitted with pressure guage , manual air bleeder, water drain and Emptying Plug fitted with collector homs and diffuser made unplasticized PVC and Polypropylene Filter flow rate- 76 Cum per hour Maximum working pressure 2.5-3.5 kg per CM2 . Supply of 5 valve Battery with connection to the filter with accessories etc., complete. Including PVC Solvent, Teflon Tape and others, inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Complete as per specifications and as directed by the Engineer incharge of work.[Total volume of water 7,84,050 turn over rate 5.15 hours] (MR)
2
755370
1510740
code31 - Supply of Filter Media (Silica sand) (MR)
6400
30
197120
code32 - Centrifugal Cast Iron Pumps, Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel AISI -420 shaft. With in built strainer basket. Conn. PN-16 according to DIN2501. Flowrate : 76m3/h. 7.5 HP Voltage 400V/ 3 ph. (2 working and 2 standby) Make: Aqualux / Equivalent (MR)
4
183040
732160
code33 - BUTTERFLY VALVES AND FLANGES:- PVC Butterfly Valves of 160mm with PVC flange Adapter, with nuts and bolts Make: Supreme / Cepex / Equivalent (MR)
22
21615
475530
code34 - STAINLESS STEEL MAIN DRAIN:- Made out of Stainless Steel sheet ( 16 guage x 304 guage with Stainless Steel circles and and Stainless steel bolts etc complete including fixing fabricating Turning cutting, rolling, Grainding, Drilling , Buffing etc including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Main Pool 450mm X 450mm (MR)
2
43366
86732.8
code35 - STAINLESS STEEL MAIN DRAIN:- Made out of Stainless Steel sheet ( 16 guage x 304 guage with Stainless Steel circles and and Stainless steel bolts etc complete including fixing fabricating Turning cutting, rolling, Grainding, Drilling , Buffing etc including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Main Pool 450mm X 450mm, Kids pool 350mm X 350mm (MR)
1
35941
35941.4
code36 - FLOOR INLETS:- Providing , Supplying and fixing of Imported floor Inlet made of ABS Plastic Multiflow and external thread (AQUALUX make) including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (MR)
31
2068
64108
code37 - S.S. LADDERS FOR 2 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 3 steps ( SS Pipe of 1. dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G. S.S Circles , Nylon Flanges S.S Bolts etc including Fabrication labour charges for Cutting, Bending , Embosing and buffing including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (MR)
2
28435
56870
code38 - S.S. LADDERS FOR 3 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 3 steps ( SS Pipe of 1 dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G. S.S Circles , Nylon Flanges S.S Bolts etc including Fabrication labour charges for Cutting, Bending , Embosing and buffing including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (MR)
2
32560
65120
code39 - S.S. LADDERS FOR 5 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 5 steps ( SS Pipe of 1 dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G. S.S Circles , Nylon Flanges S.S Bolts etc including Fabrication labour charges for Cutting, Bending , Embosing and buffing including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (MR)
2
40095
80190
code40 - TROLLEY SUCTION SWEEPER:- Providing supplying and fixing Trolly Suction Sweeper fabrication of M.S Trolly , with Supply of 2 HP Self priming Pump ( Kirloskar / equivalent make) with prefilter with Starter ( L& T or Eqauivalent) including Fabrication of Stainless steel Suction head fixed with Scrubbing brushes including supply of PVC Flexible Suction hose 30 Mtr Length and Towing rope including transporation , lifting and Unloading, Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work.(MR)
1
152515
152515
code41 - LEAF RAKE:- Providing Supplying of Lead Rake made out of alluminium pipe of Standard make and Deep bag net in Nylon including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work.(MR)
1
4126
4126.1
code42 - TEST KIT :- Providing supplying Test Kit to check free Chlorine and PH of the Swimming pool water including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (MR)
1
3630
3630
code43 - Chemical for Start up :- Providing Supplying of Trichloroisocyanuric acid (TCCA90) including transporation , lifting and Unloading inclusive all Taxes complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (MR)
200
852
170500
code44 - POOL BRUSH ( FOR WALL & FLOOR):- Providing Supplying of Pool brush ( for wall and Floor ) of Stainless Steel body with Nylon Bristle including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (MR)
2
2750
5500
code45 - P.P GRATINGS ( MILKY WHITE):- Supplying and fixing PP Gratings ( Milky white) over flow gutter gratings made of Polyprolene materials of standard size and diamentions used for swimming pools including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work.
80
2552
204160
code46 - SS HAND RAIL:- Providing fixing errecting fabricating S.S Handrails of 1 1/2 " dia x 16 guage x 304 g. pipe using SS Circles and fixed to the swimming pool wall with S.S Achoring bolts for 1 Rft including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (MR)
50
3283
164175
code47 - SS RINGS FOR LANE SEPARATOR:- Providing Supplying SS. Rings for Lane separator fabricated in 4" dia x 16 G x 304 G Pipe with S.S Rod including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (MR)
18
3355
60390
code48 - PLUMBING - All allied fixtures & fittings Complete for complete working of the swimming pool. All items to be of IS standard and reputed make and as per the directions of the Engineer in charge of work. (MR)
1
231000
231000
code49 - Line separator(Float lane) (MR)
225
2255
507375
code50 - Starting block for swimming pool [improved Stainless steel with fiber] (MR)
8
36740
293920
code51 - INSTALLATION :- Installation of all the equipments for the purpose of functioning of swimming pool with necessary staff men material labours, including transportation, lifting and unloading inclusive all taxes HOM of machineries, fabrications, labour charges etc., complete as per additional technical Bid document special specification enclosed for the successful completion of the work and as per the directions for the Engineering in charge of the work (MR)
2
85800
171600
code52 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 63mm dia., 6 kg/sqcm & class 3 ( Item No. 10.1.4, Page no. 113, SR 2023-24 Vol. 5)
30
165
4974.9
code53 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 90mm dia., 6 kg/sqcm & class 3 ( Item No. 10.1.6, Page no. 113, SR 2023-24 Vol. 5)
160
302
48451.2
code54 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 140mm dia., 6 kg/sqcm & class 3 ( Item No. 10.1.8, Page no. 113, SR 2023-24 Vol. 5)
160
601
96243.2
code55 - Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete for: Pipes of SN 4, 75mm dia. ( Item No. 10.2.1, Page no. 113, SR 2023-24 Vol. 5)
40
223
8940.4
code56 - Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete for: Pipes of SN 8, 110mm dia. ( Item No. 10.2.8, Page no. 113, SR 2023-24 Vol. 5)
285
357
101861.85
code57 - Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete for: Pipes of SN 8, 200mm dia. ( Item No. 10.2.11, Page no. 113, SR 2023-24 Vol. 5)
83
1065
88396.66
code58 - Commissioning the pool and traning for 1 week about pool maintenance (MR)
2
49500
99000
code59 - Control panel board which includes Fabricated MS Powder coated box, with the fixtures like MCB, ammeter, volt meter, etc. complete ( Suitable for Centrifugal Pump of 7.5 HP, 76 m3/hr.
1
70000
70000
code60 - Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled-device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
6
5030
30183.12
code61 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
10
6156
61563.1
code62 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
10
3174
31744.6
code63 - Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required
6
13331
79987.74
code64 - Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Clas
55
2498
137432.9
code65 - Providing and fixing Exposed set for concealed stop cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class
65
883
57443.1
code66 - Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
47
226
10650.2
code67 - Providing and fixing toilet paper holder :
18
626
11272.32
code68 - Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class
10
4976
49769.6
code69 - Providing and fixing PTMT, push cock of approved quality and colour.
8
131
1054.72
code70 - Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class
20
6123
122467
code71 - Providing and fixing 20mm dia chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and making good walls). [P-100,13.86.2]-2018-19
351
290
101951.46
code72 - Providing and fixing 25mm dia chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and making good walls). [P-100,13.86.3]-2018-19
200
362
72428
code73 - Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay (non modular) bricks of class designation 3.5
4
23714
94858.88
code74 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 110mm
255
1260
321300
code75 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 75 mm
300
740
222000
code76 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
9
46350
code77 - Fixing, installing & testing 15mm CP health faucet of approved make with necessary CP flexible hose 1000mm long nozzle, CP wall flange, CP angle cock etc., complete. MR
12
4620
55440
code78 - Providing and fixing bevelled edge Mirror -[ Non SR item ]
2
12000
24000
code79 - 1.1 kV,XLPE or Heat resistant PVC insulated, PVC exutruted Inner sheathed armoured LYUG cable as per IS -1554(Part 1 )or IS 7098 Part-1, Armouring strip thickeness and resistivity as per IS-3975. 50 sqmm 4 core (17 GI strips -4x0.8mm) (Sl.No.208, Item No.32.12, Page No.13, ESCOMs SR 2 2023-2024).
0.19
207194
39366.86
code80 - Epoxy Terminating kit (Pot head) suitable for 1.1kV, LT UG Cable.(Sl.No.249, Item No.35.01, Page No.15, ESCOMs SR 2 2023-2024).
1
324
324
code81 - Laying of cable in existing trench/ GI pipe/ Stone ware/ RCC Hume pipe using wooden/ Aluminium rollers as directed by the department staff. LT Cable. 35 to 95Sqmm. (Sl.No.175, Item No.21.06, Page No.52, ESCOMs SR 2 2023-2024).
0.19
31139
5916.41
code82 - Earth work excavation by manual means for drains waste weir, draft approach channels, key trenches foundation of building & bridge & such canals and similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, re- moval of stumps and other deleterious matter, excavated surface lev- eled and sides neatly dressed disposing off the excavated stuff or sort- ing & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work In all kinds of soils Depth upto 1.5 m P.NO.5 I.NO.1.4.1 VOL-1 CSR 2023-24
98
266
26087.6
code83 - Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. (Sl.No.1., Item No.1.2.2, Page No.2 , PWD Ele SR 2 2023-2024).
450
78
35100
code84 - Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. (Sl.No.1, Item No.1.1.1, Page No.2 , PWD Ele SR 2 2023-2024).
750
69
51750
code85 - Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 200 x 65 mm. (Sl.No.1., Item No.1.4.7, Page No.2 , PWD Ele SR 2 2023-2024).
2
348
696
code86 - Supplying and fixing PVC/metal conduit Deep junction box. (Sl.No.1., Item No.1.5.2, Page No.2 , PWD Ele SR 2 2023-2024).
2
56
112
code87 - Supplying And Fixing Metal Fan Box with Round Hook.(Sl.No.1, Item No.1.13, Page No.4 , PWD Ele SR 2 2023-2024).
15
117
1755
code88 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short Point upto 3 mtrs from tapping point to outlet via switch box. (Sl.No.2., Item No.2.2.1, Page No.5 , PWD Ele SR 2 2023-2024).
16
269
4304
code89 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch box. (Sl.No.2, Item No.2.2.2, Page No.5 , PWD Ele SR 2 2023-2024).
24
379
9096
code90 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box. (Sl.No.2, Item No.2.2.3, Page No.5, PWD Ele SR 2 2023-2024).
45
555
24975
code91 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mm2. (Sl.No.2, Item No.2.3.2, Page No5 , PWD Ele SR 2 2023-2024).
1250
26
32500
code92 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2. (Sl.No.2, Item No.2.3.3, Page No5, PWD Ele SR 2 2023-2024).
1400
42
58800
code93 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4mm2. (Sl.No.2, Item No.2.3.4, Page No5, PWD Ele SR 2 2023-2024).
1000
63
63000
code94 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6mm2. (Sl.No.2, Item No.2.3.5, Page No5, PWD Ele SR 2 2023-2024).
300
92
27600
code95 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 10mm2. (Sl.No.2, Item No.2.3.6, Page No. 6, PWD Ele SR 2 2023-2024).
400
167
66800
code96 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010. 3cx2.5sqmm (Sl.No.2, Item No.2.5.8, Page No6, PWD Ele SR 2 2023-2024).
300
113
33900
code97 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010. 3cx 4sqmm (Sl.No.2, Item No.2.5.15, Page No6, PWD Ele SR 2 2023-2024).
400
172
68800
code98 - Supplying, Wiring & Fixing Earth electrode for Grounding conduits,I.C.cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr. Long buried in a pit..The pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size asper ISI specification 7.3.3 of IS 732 using 12mm dia bolts,nuts,washers and checknuts etc, the pipe shall have 16 through holes of 12mm dia.(Sl.No.12, Item No.12.57, Page No.54, PWD Ele SR 2 2023-2024).
4
3510
14040
code99 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way. (Sl.No.3, Item No.3.3.3, Page No.8, PWD Ele SR 2 2023-2024).
6
137
822
code100 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5 Way. (Sl.No.3, Item No.3.4.3, Page No.8, PWD Ele SR 2 2023-2024).
6
177
1062
code101 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4Module. (Sl.No.3, Item No.3.5.3, Page No.8, PWD Ele SR 2 2023-2024).
6
175
1050
code102 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 Way. (Sl.No.3, Item No.3.3.5, Page No.8, PWD Ele SR 2 2023-2024).
5
219
1095
code103 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way. (Sl.No.3, Item No.3.4.5, Page No.8, PWD Ele SR 2 2023-2024).
5
261
1305
code104 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module. (Sl.No.3, Item No.3.5.5, Page No.8, PWD Ele SR 2 2023-2024).
5
284
1420
code105 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 10-12Way. (Sl.No.3, Item No.3.3.6, Page No.8, PWD Ele SR 2 2023-2024).
3
261
783
code106 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way. (Sl.No.3, Item No.3.4.6, Page No.8, PWD Ele SR 2 2023-2024).
6
319
1914
code107 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module. (Sl.No.3, Item No.3.5.6, Page No.8, PWD Ele SR 2 2023-2024).
6
344
2064
code108 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 16 Way. (Sl.No.3, Item No.3.3.7, Page No.8, PWD Ele SR 2 2023-2024).
2
294
588
code109 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 16Way. (Sl.No.3, Item No.3.4.7, Page No.8, PWD Ele SR 2 2023-2024).
2
363
726
code110 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16 Module. (Sl.No.3, Item No.3.5.7, Page No.8, PWD Ele SR 2 2023-2024).
2
397
794
code111 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 18 Way. (Sl.No.3, Item No.3.3.8, Page No.8, PWD Ele SR 2 2023-2024).
2
339
678
code112 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 18Way. (Sl.No.3, Item No.3.4.8, Page No.8, PWD Ele SR 2 2023-2024).
2
405
810
code113 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 18 Module. (Sl.No.3, Item No.3.5.8, Page No.8, PWD Ele SR 2 2023-2024).
2
457
914
code114 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One way Switch. (Sl.No.3, Item No.3.6.1, Page No.9, PWD Ele SR 2 2023-2024).
110
102
11220
code115 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three way Socket. (Sl.No.3, Item No.3.6.3, Page No.9, PWD Ele SR 2 2023-2024).
15
171
2565
code116 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. (Sl.No.3, Item No.3.6.4, Page No.9, PWD Ele SR 2 2023-2024).
15
357
5355
code117 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A One way Switch.(Sl.No.3, Item No.3.6.7, Page No.9, PWD Ele SR 2 2023-2024).
5
180
900
code118 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP switch.(Sl.No.3, Item No.3.6.9, Page No.9, PWD Ele SR 2 2023-2024).
9
326
2934
code119 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket.(Sl.No.3, Item No.3.6.10, Page No.9, PWD Ele SR 2 2023-2024).
6
236
1416
code120 - Supplying and fixing of metal clad industrial plugs and sockets.3pole+earth 440V PLUG (Sl.No.3, Item No.3.13.4, Page No.9, PWD Ele SR 2 2023-2024).
3
609
1829.58
code121 - Supplying and fixing of metal clad industrial plugs and sockets.3pole+earth 440V SOCKET (Sl.No.3, Item No.3.13.8, Page No.9, PWD Ele SR 2 2023-2024).
3
827
2483.46
code122 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bakelite Ceiling Rose.(Sl.No.3, Item No.3.14.5, Page No.9, PWD Ele SR 2 2023-2024).
120
78
9360
code123 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder.(Sl.No.3, Item No.3.14.7, Page No.9, PWD Ele SR 2 2023-2024).
45
74
3330
code124 - Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20" x 20" x 2.5"(Sl.No.5, Item No.5.6.6, Page No.14, PWD Ele SR 2 2023-2024).
1
326
326.13
code125 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.100A(Sl.No.5, Item No.5.7.4, Page No.14, PWD Ele SR 2 2023-2024).
3
691
2073
code126 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP (Sl.No.5, Item No.5.18.5, Page No.17, PWD Ele SR 2 2023-2024).
5
1060
5300
code127 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN.(Sl.No.5, Item No.5.18.9, Page No.18, PWD Ele SR 2 2023-2024).
4
3088
12352
code128 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II - Double Door. 4 Way SP & N. (Sl.No.5, Item No.5.19.6, Page No.18, PWD Ele SR 2 2023-2024).
4
1524
6096
code129 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II - Double Door. 8 Way SP & N. (Sl.No.5, Item No.5.19.6, Page No.18, PWD Ele SR 2 2023-2024).
1
1854
1854
code130 - Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (Sl.No.5, Item No.5.27, Page No.19, PWD Ele SR 2 2023-2024).
1
200
200
code131 - Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. (Sl.No.5, Item No.5.28, Page No.19, PWD Ele SR 2 2023-2024).
2
160
320
code132 - Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter. (Sl.No.5, Item No.5.29, Page No.19, PWD Ele SR 2 2023-2024).
2
1425
2850
code133 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (Sl.No.5, Item No.5.35, Page No.19, PWD Ele SR 2 2023-2024).
1
5705
5705
code134 - Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor.(Sl.No.5, Item No.5.37, Page No.19, PWD Ele SR 2 2023-2024).
6
480
2880
code135 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.(Sl.No.5, Item No.5.38, Page No.19, PWD Ele SR 2 2023-2024).
12
515
6180
code136 - Supplying 100 A 4 x 30 x 6 mm Aluminium Strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. (Sl.No.5, Item No.5.40.1, Page No.20, PWD Ele SR 2 2023-2024).
2
2465
4930
code137 - Fabricating supplying and mounting MS box made out 16SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. (Sl.No.5, Item No.5.40.1, Page No.20, PWD Ele SR 2 2023-2024).
10000
-
4300
code138 - Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 mm x 600 mm x 170 mm(Sl.No.5, Item No.5.44.3, Page No.21, PWD Ele SR 2 2023-2024).
1
6867
6867
code139 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.(Sl.No.11, Item No.11.3.2, Page No.43 , PWD Ele SR 2 2023-2024).
15
2984
44760
code140 - Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. (Sl.No.13, Item No.13.11, Page No.57, PWD Ele SR 2 2023-2024).
15
315
4725
code141 - Supplying of LED light fitting 1 x 4 - 36/40 W -PVC Batten with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.(Sl.No.11, Item No.11.3.2, Page No.43 , PWD Ele SR 2 2023-2024).
22
1269
27918
code142 - Supply of 200W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 200W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect(Sl.No.11, Item No.11.8.8, Page No.45 , PWD Ele SR 2 2023-2024).
8
18581
148648
code143 - Supplying and Fixing 32.mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires. (Sl.No.13, Item No.13.2.2, Page No.56, PWD Ele SR 2 2023-2024).
8
1295
10360
code144 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufactuerer & Cree/Nischia/Lumileds/Osram makeLED source. LED Flood Lights 100 watts.(Sl.No.46, Item No.11.9.2, Page No.46, PWD Ele SR 2 2023-2024).
4
9486
37944
code145 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.. (Sl.No.13, Item No.13.5, Page No.56, PWD Ele SR 2 2023-2024).
12
162
1944
code146 - Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. (Sl.No.13, Item No.13.19, Page No.58, PWD Ele SR 2 2023-2024).
22
490
10780
code147 - Erection of single phase preventer / ammeters / including fixing selector switch / voltmeter / current operated earth leakage circuit breakers / voltage operated circuit breaker / above 100A fuse channel set (3 Nos) HRC fuses above100A (3 Nos.) / Digital ammeter/digital volt meter/set of3 indicating lA /MCB / Relays /A-V selector switches including wiring using suitable capacity wires, bolts, nuts, screws. (Sl.No.13, Item No.13.16, Page No.57, PWD Ele SR 2 2023-2024).
10
198
1980
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%