Directorate Of Municipal Administration Tender

code04 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and pertec linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 ems with gravel or selected earth available from the excavation etc. complete-110mm(weight of pipe -1.894 kg) Water supply and UGD Works Common Schedule of Rates 2023-24 Volume-V P.No 140 1 No 13.3 M150D ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code05 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls a 1.25 tr/10 m over and including one coat of Special primer applied a 0.75 ltr /10 m² with paint oproved quality to give an even shade, after thoroughly brooming the surface to all dirt, dust, mortar drops and foreign matter including preparing the surface and sand paper smooth, cost of materials, labour complete as per specifications d as per directions of Engineer-in-charge.Percentage on finished rate of concrete per m3 Plastering & Painting of New walls & Ceiling 25% (Vol:2 P.NO.46 1.No: 8.33.1 PWD S.R. 2023-24 ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code06 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.901/10 m² over an under coat of primer applied @ 0.80 1/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter. cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD Common DSR 2023-24 ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code07 - Fabricating, supplying and erection of..ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade 355J0 steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .....m Pole in single section and single joint welded as per IS 9595-1810178AWS having dimensions bottom um, top min with 3 mm thick, suitable base plate and 4Nos of long J bolts with template and the Pole shall be hot dip galvanized in single dipping with not than 65micron as per ASTM-A123 and 153 etc texcluding foundation) as per ang appended. (PWD Electrical CSR 2023-24, IN-4.1.5 ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code08 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT5500K. IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains. Surge Protection- Min 5KV along with Over age Overload, short circuit miss-wiring protection. Compatible for pole mauling ter dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range 00 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & Adherence with RoHS. UL. approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by 11D manufacturer & Cree Nichia Lumileds Osram make LED Source.1.1.D Floodlight 70W V-6 L.No 11.9.1 ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code09 - Suraying and Fixing.........mm dia class A Gl pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV SV/MH/TTL street light fitting of all capacities on rail RCC wall/ tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires.(PWD Electrical CSR 2023-24, IN-13.2.1. PN-561. Using 25mm dia G.L.Pipe ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code10 - Fixing halogen/metal halide /SVI/IL/LED floodlight fitting over existing pole/wall ceiling including clA. bolts, nuts and wiring using suitable capacity wires. PWD SP 2023-241 No 13.5 ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code11 - Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade. multistrand Copper conductor single core cable in open or concealed system of iring with specified IS-694:1990 & confirming to the attached GTP of GROUP-A m PWD S.R. 2023-24 1 No 2.3,1 ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code12 - Name Board Writing Letter (29 Nor Letters) ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code13 - Granite Stone ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

code14 - Bench ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work