Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 36,171Document Cost
Refer DocumentsTender Fee
₹ 500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/OW/WORK_INDENT27017Tender No
DMA/2024-25/OW/WORK_INDENT27017Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.5.1 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol No.01 P.No.16 SI No.2.5.1)
0.74
6961
5151.51
112 SI No.15) - Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3 RCC Roof Slabs 50% (PWD SR 2023-24 Vol No.01 P.No.112 SI No.15)
0.74
1392
1030.302
2.11a - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings(PWD SR 2023-24 Vol No.01 P.No.18 SI No.2.11a)
0.1736
93929
16306.22196
6.32 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usagecharges of machinery etc complete as per specifications.(PWD SR 2023-24 Vol No.02 P.No.17 SI No.6.32 )
17.19
1375
23644.845
8.4.1 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. - etc., complete with all lead and lift, loading & unloading. And as directed by the Engineer-in-charge of the work.(PWD SR 2023-24 Vol No.02 P.No.41 SI No.8.4.1)
3.52
339
1193.808
8.9 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24 Vol No.02 P.No.42 SI No.8.9)
40.47
404
16359.9975
11.34A - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (PWD SR 2023-24 Vol No.02 P.No.86 SI No.11.34A)
21.6
176
3810.24
8.7 - Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Vol No.02 P.No.42 SI No.8.7)
35.11
384
13492.773
12.54 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with
19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. (PWD SR 2023-24 Vol No.02 P.No.104 SI No.12.54)"
204.8
333
68382.72
12.55.1 - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom
rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. do- with both side prelam (PWD SR 2023-24 Vol No.02 P.No.104 SI No.12.55.1)"
53.76
2484
133555.968
8.33.3 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per
directions of Engineer-in-charge. . (PWD SR 2023-24 Vol No.02, P.No.47 SI No.8.33.3 )"
1.89
145
275.8455
12.85 - Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). (PWD SR 2023-24 Vol No.02 P.No.109 SI No.12.85)
1.08
6004
6485.346
10.14 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete - etc., complete with all lead and lift, loading & unloading. And as directed by the Engineer-in-charge of the work.(PWD SR 2023-24 Vol No.02 P.No.71 SI No.10.14)
178.62
1161
207431.406
9.9 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete - etc., complete with all lead and lift, loading & unloading. And as directed by the Engineer-in-charge of the work.(PWD SR 2023-24 Vol No.02 P.No.60 SI No9.9)
21.04
1129
23770.992
8.30 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24 Vol No.02 P.No.46 SI No8.30)
40.47
182
7393.869
8.54.1 - Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge.(PWD SR 2023-24 Vol No.02 P.No.46 SI No8.54.1)
38.63
76
2960.9895
12.86 - Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m2PWD SR 2023-24 Vol No.02 P.No.109 SI No.12.86)
2.4
5659
13582.8
13.31.2 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia pipes(PWD SR 2023-24 Vol No.02 P.No.122 SI No.13.31.2)
75
397
29846.25
14.1.1 - Providing & fixing White vitreous china water closet squatting pan (Indiantype) along with "S" or "P" trap including dismantling of old WC seat and"S" or "P" trap at site complete with all operations including all necessarymaterials, labour and disposal of dismantled material i/c malba, allcomplete as per the direction of Engineer-in charge.Long pattern W.C Pan of size 580x440 mm (PWD SR 2023-24 Vol No.02 P.No.130 SI No.14.1.1)
8
2930
23444.4
14.7.4 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap - etc., complete with all lead and lift, loading & unloading. And as directed by the Engineer-in-charge of the work.(PWD SR 2023-24 Vol No.02 P.No.132 SI No.14.7.4)
4
2462
9849
13.34 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(PWD SR 2023-24 Vol No.02 P.No.122 SI No.13.34)
15000
9
141750
13.7.1 - Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g.(PWD SR 2023-24 Vol No.02 P.No.120 SI No.13.17.1)
"
60
165
9954
14.3 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(PWD SR 2023-24 Vol No.02 P.No.136 SI NO14.3)
"
2
1281
2562
13.51 - Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 Coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay (non modular) bricks of class designation 3.5 (PWD SR 2023-24 Vol No.02 P.No.125 SI NO13.51)
6
1791
10747.8
1.5.1 - Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth (PWD SR 2023-24 Vol No.01 P.No.06 SI No. 1.5.1 )
14.06
240
3380.727
16.1.4 - Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing. 230 mm dia. pipes(PWD SR 2023-24 Vol No.05 P.No.187 SI No.16.1.4)
25
926
23152.5
2.78.5 - Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded Elbow 32X1/2mm (PWD SR 2023-24 Vol No.05 P.No.40 SI No.2.78.5)
50
136
6825
10.10.2 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments ( PWD SR 2023-24 Vol No.05 P.No.117 SI No.10.10.2)
40
33
1344
10.11.2 - Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC BEND ( PWD SR 2023-24 Vol No.05 P.No.118 SI No.10.11.2)
40
37
1512
10.8.2 - Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete 32mm dia PVC couplers ( PWD SR 2023-24 Vol No.05 P.No.116 SI No.10.8.2)
15
16
252
2.79.3 - Supply of PPR Gate valve confirming to IS 15801-2008 and DIN Standards 8077/8092 ( PWD SR 2023-24 Vol No.05 P.No.41 SI No.2.79.3)
5
614
3071.25
7.2.3 - GEYSERS
7.0 GEYSERS, HEATERS & SOLAR WATER HEATERS Supplying .litres capacity vertical/horizontal type wall mounting
Electrical water heater with 22 SWG copper/SS sheet metal inner
Container tinned inside Fiber body outside, filled with glass wool
between inner and outer container for thermal insulation complete.
The inlet and outlet pipes so arranged that water flow inside results
in water to flow out from the inner container without turbulence.
The Inner container shall have direct immersion type copper tube
nickel plate. 2kW capacity element with a neon indicator fitted with
20A capacity 25 to 85 degree Centigrade range thermostat. The
water heater shall completely be wired with 40/0.0076 inch 3 core
copper flexible wire of 1.5 meters length and the outer container
provided with heavy gauge brackets for wall mounting. 5 Star With Fibre body 7.2.3) 50 L
Basic Rate - 18573=00 Wtg 5% - 928=65 Total - 19501=65 PWD Ele SR 2023-24 Page No.33 Item code 7.2.3"
20
19501
390033
13.15.2 - Erection charges for fixing a . litres capacity wall mounting electric
geysers using bolts, flat at one end nut and washers at the other end
for through bolts and nuts and washers with 150x450x600mm back
plate and wiring complete with 15A 3 pin top. 13.15.2)35 to 50 Litres
Basic Rate - 698=00 Wtg 5% - 34=90 Total - 732=90 PWD Ele SR 2023-24 Page No.56 Item code 13.15.2 "
20
732
14658
1.2.1 - Mains Pipe.
PVC CONDUIT & ITS ACCESSORIES 1.1 ) Open Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 1.1.2) 25 mm dia 2 mm thick Basic Rate -81=00 Wtg 5% - 4=05 Total - 85=05 PWD Ele SR 2023-24 Page No.1 Item code 1.2.1 "
302
85
25685.1
2.3.2 - Wire:
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010
2.3.2) 1.5 mm2
Basic Rate - 26=00 Wtg 5% - 1=30 Total - 27=30 PWD Ele SR 2023-24 Page No.4 Item code 2.3.2 "
300
27
8190
2.3.4 - Wire:
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010
2.3.4) 4 mm2
Basic Rate - 63=00 Wtg 5% - 3=15 Total - 66=15 PWD Ele SR 2023-24 Page No.4 Item code 2.3.4 "
900
66
59535
3.4.4 - Metal modular box:
Supplying and flush mounting powder coated / galvanized metal
box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/Stone /C.C wall 3.4.4)6 Way
Basic Rate - 220=00 Wtg 5% - 11=00 Total - 231=00 PWD Ele SR 2023-24 Page No.7 Item code 3.4.4 "
16
231
3696
3.5.4 - modular Switch Plate
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with
required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.4)6 Module
Basic Rate - 234=00 Wtg 5% - 11=70 Total - 245=70 PWD Ele SR 2023-24 Page No.7 Item code 3.5.4 "
16
245
3931.2
3.6.9 - Modular DP switch
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 3.6.9) 32A DP Switch.
Basic Rate - 326=00 Wtg 5% - 16=30 Total - 342=30 PWD Ele SR 2023-24 Page No.8 Item code 3.6.9"
16
342
5476.8
3.6.10 - Modular socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.10) 6/16A Universal Socket Basic Rate - 236=00 Wtg 5% - 11=80 Total - 247=80 PWD Ele SR 2023-24 Page No.8 Item code 3.6.10"
16
247
3964.8
5.18.1 - MCB Switches.
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit
breaking capacity of 10K and complete wiring as required
confirming to IEC 60898.
5.18.1) 6-32 A SP Basic Rate - 415=00 Wtg 5% - 20=75 Total - 435=75 PWD Ele SR 2023-24 Page No.16 Item code 5.18.1"
16
435
6972
5.18.4 - MCB Switches.
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit
breaking capacity of 10K and complete wiring as required
confirming to IEC 60898.
5.18.4) 6-32 A DP Basic Rate - 415=00 Wtg 5% - 20=75 Total - 435=75 PWD Ele SR 2023-24 Page No.16 Item code 5.18.4"
4
775
3103.8
5.18.9 - MCB Switches.
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit
breaking capacity of 10K and complete wiring as required
confirming to IEC 60898.
5.18.9) 50-63 A TPN Basic Rate - 3088=00 Wtg 5% - 154=40 Total - 3242=40 PWD Ele SR 2023-24 Page No.16 Item code 5.18.9"
3
3242
9727.2
25.a - Earthing 25.a) GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete
25.a) Transformer grounding Basic Rate - 1729=00 ASL 5% - 86=45 Total - 1815=45 Hescom SR 2023-24 Item code 25.a (Material Cost) "
3
1815
5446.35
25.a - Earthing 25.a) GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete
25.a) Transformer grounding Basic Rate - 949=00 ASL 5% - 47=45 Total - 996=45 Hescom SR 2023-24 Item code 25.a (Labour Cost) "
3
996
2989.35
1.6.1 - Earthing Pit 1.6)Digging of Pit for providing GI Pipe type Earthing 1.6.1) Ordinary Soil Basic Rate - 759=00 ASL 5% - 37=95 Total - 796=95 Hescom SR 2023-24 Item code 1.6.1 (Labour Cost)
3
796
2390.85
1.6.1 - GI Wire 8) Guy Wire & GI Wire as per IS-2141 8.02) 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM Basic Rate - 75040=00 ASL 5% - 3752=00 Total - 78792=00 Hescom SR 2023-24 Item code 1.6.1 (Material Cost)
0.01
78792
787.92
5.6.2 - Supply and fixing polished wood board made of not less than
15mm thick plank on both sides of not more than 2 pieces and
fixing the same to the wall using tapered inverted wooden plugs
screws.
5.6.2) 10"" x 8"" x 1.5"" Basic Rate - 3088=00 Wtg 5% - 154=40 Total - 3242=40 PWD Ele SR 2023-24 Page No.16 Item code 5.6.2"
4
107
428.4
2.2.1 - Points
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase &
Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC
insulated copper wire (confirming to IS-694: and latest
amendments) without control switch shall be fixed on the existing
plastic sheet/ gang box, the other end of the wires shall be
terminated with sufficient loose length in a wood/PVC round block.
complete for each outlet.
2.2.1) Short point upto 3Mtr from tapping point to out let via switch
Basic Rate -269=00 Wtg 5% - 13=45 Total - 282=45 PWD Ele SR 2023-24 Page No.4 Item code 2.2.1 "
3
282
847.35
1.2.1 - Mains Pipe.
Open Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm
thick confirming to IS 2509 with suitable size bends, metal/PVC
Junction boxes, adhesive paste etc., and running before concreting
the slab. The conduit should be tied to the reinforcement rods by
using binding wires and unused ways of junction boxes and pipe
ends should be covered using PVC end enclosures, run with
18SWG GI fish wire wherever necessary 1.2.1) 19/20 mm dia 2 mm thick Basic Rate -66=00 Wtg 5% - 3=30 Total - 69=30 PWD Ele SR 2023-24 Page No.1 Item code 1.2.1 "
20
69
1386
2.3.2 - Wire:
Wiring for lighting/power circuit using one of FRLS PVC insulated
1100V grade, multistrand copper wire with low conductor resistance
single core in open or concealed system of wiring with specified IS-
694:2010
2.3.3)2.5 mm2
Basic Rate - 42=00 Wtg 5% - 2=10 Total - 44=10 PWD Ele SR 2023-24 Page No.4 Item code 2.3.2 "
60
44
2646
3.6.1 - Modular switch
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 3.6.1) 6Amps one way.
Basic Rate - 102=00 Wtg 5% - 6=10 Total - 107=10 PWD Ele SR 2023-24 Page No.8 Item code 3.6.1"
3
107
321.3
3.6.4 - Batten Holder
Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board. 3.14.7) 6A Batten Holder
Basic Rate - 74=00 Wtg 5% - 3=70 Total - 77=70 PWD Ele SR 2023-24 Page No.9 Item code 3.6.4"
3
77
233.1
11.11.4 - LED Bulb
Supplying & fixing of retrofit type - LED bulb . W with OPAL
acrylic diffuser comprising of LED source with CCT 6500 degree K,
CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and
Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are
driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
11.11.4) 9W, 6500K
Basic Rate - 154=00 Wtg 5% - 7=70 Total - 161=70 PWD Ele SR 2023-24 Page No.42 Item code 11.11.4"
3
161
485.1
2.2.3 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including FormWork-FOOTINGS(PWD SR 2023-24 Vol No.01 P.No.15 SI No.2.2.3)
1.66
6652
11043.648
112 SI No.15 - Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3 Footing 8% (PWD SR 2023-24 Vol No.01 P.No.112 SI No.15)
1.66
532
883.4852
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%