Directorate Of Municipal Administration Tender

004 - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 For Grading -I Material SR 2023-24 Item No 4.2 i

005 - Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m 3 (75:25 proportion) as per approved mix design procedure and thickness as per design, over a prepared sub base. The superplastisiser confirming to IS 9103-1999 Reaffirmed-2008 ,Coarse aggregates and Fine aggregate confirming to IS:383-2016,transported to site, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work). Spreading the concrete with shovels, rackers and compacted using needle, suitable plate vibrator and finished in a continuous operation including provision of separation membrane and Hessian cloth finishing to lines and grades complete including cost of all materials, labour, all lead & lift, loading charges as per specification & direction of Engineer - incharge of the work. (Groove cutting shall be paid seperately ) SR 2023-24 Item No 6.6 V-3

006 - As per recommendation of technical Working comitee PWD SR 2023-24 rates for Formwork shall be added on 5% basis Finishing rate of Concrete For Concrete band Road medians, Traffic Separators, Dividers etc SR 2023-24 Sl No.7 V-1 Pg No 111

007 - Geophysical investigation of site for sinking Borewell for supplying drinking water to the Habitation eighter through the hand pump MWS PWS by vertical electrical sounding by akopting Venner or Scheumberger's method including Reconnisance survey of Geological formation Geophyical investigation of existing ground water in the vicinity indicating the its quality quantity and acceptablitiy of the users, location of site recommended Depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 meter in consolidated formation for proper seating of casing pipes depth of drilling required to cover full depth fo aquifer proposed to be tapped probable yield and other information rquired for safe drilling and harnessing including transportation of an instrument and accessories to work site, engaging technical personnal and labour required etc complete. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. As Per RDWSR 2021.22 SOR CODE O040A SL.No-4

008 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) As Per RDWSR 2021.22 SOR CODE O010A SL.No-2 Page No-151

009 - 50 to 100 Mtr

010 - Borewell depth of 100 to 150 m

011 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 200mm(weight of pipe -6.233 kg) As Per RDWSR 2021-22 SOR CODE-M150N SL.No-13.6 Page No-140

012 - Supplying of 170mm dia Borewell cap

013 - Providing, supplying to work site, fixing of Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well and confirming to IS 8034 specifications, with testing of as per instructions of engineer in-charge of work and latest amendments. LUBI, V-GUARD, TEXMO, CRI Company Make Supply RDW SR-2021-22 SOR CODE-P080H SL.No.8.8

014 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : (RDWSR 2021-22 (SOR CODE-K010A SL.No-1.1)

015 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. RDW SR-2021-22 SOR CODE-P230B & P230C SL.No.22.2, 22.3 1x3x2.5 m2 Sqm Basic Rate 98/- + 3 % Weightage extra to Current SR 2021-22 - 2.94/- Total - 100.94/-

016 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL DOLDirect Online Starter 2) S-D- Star Delta Starter Upto 6 HP pumps As per RDWSR 2021-22 (SOR CODE-P270A SL.No-29.1)

017 - Earthing: Supplying , fixing and wiring earth electrode for grounding conduits, IC cutouts and other equipments on the meter board using 40 mm dia 2.90 mm thick G.I Pipe 2.50 Mtrs Long Burried in a pit. The pit should be filled up with equal proportion of salt and charcoal 150mm all around the pipe to complete depth. The connecton from the pipe to the conduits. etc., is to be established through G.I wire of sizes as per clause ISI Specification 7.3.3 of IS 732 using 12mm bolts, nuts washers and check nuts etc., the pipe shall have 16 throuhg holes of 12mm dia. complete as per specification and work shall be carried out as directed by engineer incharge of the work. (specification as per PWD Ele SR 2019-20 P. No-40 I No-6.1 )

018 - Labour charges for Erection, Electrification and commissioning of Pump ets,including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. As per RDWSR 2021-22 (SOR CODE-P360A SL.No-38 P NO:163)

019 - Supplying of 1.1 KV LT UG cable XLPE or heat registant PVC insulated, PVC extruded inner sheathe or armoured UG LT Cable as per IS-1554 ( Part-01) or IS-7098 Part-01 armouring Strip thikness in average+5% & Resistivity 14 Ohms/Kms (Max) as per IS-3975 (PWD Ele SR 2019-20 P.NO. 40 I.NO. 6.4.2)

020 - Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any. As per RDWSR 2021-22 (SOR CODE-N170D, N170E SL.No-15.3,15.4 Page No-146)

021 - Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc.(PWD Ele SR 2019-20 P.NO. 42 I.NO. 6.10.1)

022 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) As Per Electrical SR 2019-20 P.No-41 S.L.No-6.6.1

023 - Labour charges for laying of 1.1 kv class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench / duct. 25 sqmm to 75 sqmm … incluidng cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc. complete as per specifications & as directed by engineer-in-charge of the work. (PWD Ele SR 2019-20 P.NO. 41 I.NO. 6.5.2)

024 - Supply and fixing of Energy Meter as per direction of engineer incharge of work. Including Fixing Space For HESCOM Energy Meter, Deposit, Meter cost, test Report & agreements Wiring etc . Complete

025 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. SR 2023-24 Item No 10.1.5

026 - Supplying and fixing of pvc fittings consider 10% of the Pipe cost.

027 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge SR 2023-24 Item No 11.16.1 V-2

028 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. SR 2023-24 Item No 13.34 V-2

028 - Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. SR 2023-24 Item No 1.5 V-1

029 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: SR 2023-24 Item No 10.1.5

030 - Supplying and fixing of pvc fittings consider 10% of the Pipe cost.

031 - Supplying and fixing of pvc fittings consider 10% of the Pipe cost.

032 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications : SR 2023-24 Item no 1.10 V-1

033 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. SR 2023-24 Item No 13.34 V-2