Directorate Of Municipal Administration Tender

code04 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

code05 - Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications

code06 - Addendum I Percentage Additionalities for Formwork,Centering & Scaffoldingement Concrete Drain Walls 35% of Cement Concrete

code07 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary includingjointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) e10.1.1 PVC pipes 25mm dia, 10 kg/sqcm & class 5 m 48

code08 - Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited forprocurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of 21.1.2 For 50 LPH : Cabin

code09 - Supply of LED floodlight luminaire with pressure die cast aluminium housingbodyforoptimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output Rated life Burning Hrs 50000 hr LumenMaintenance of 70, CCT 5500K, IP 66 optical and electrical compartment& impact resistance of complete luminaire IK08. Power Factor 0.9 withmains, Surge Protection- Min 5KV along with Over voltage/ Overload,short circuit/ miss wiring protection. Compatible for pole mauling with outerdia of 40mm to 50mm. Universal Voltage driver to operate wide voltage rangefrom 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598,LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top accessstreet light with single screw to ensure ease of maintenance at the sight sitelocation with minimized minimal tools. LED Light fixture with W SystemPower consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminairemanufacturer should have in house facility accredited by NABL / CPRI & anyGovernment certified agency & Design & Development facility certified byISO 9001:2008. Housing with supplier word mark / name shall be Engraved /Embossing on the die cast housing / Body part Warranty of 2 Years against anymanufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.

code10 - Supply of gate light luminaire with pressure die cast aluminium housingbodyforoptimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output Rated life Burning Hrs 50000 hr @ LumenMaintenance of 70, CCT 5500K, IP 66 optical and electrical compartment& impact resistance of complete luminaire IK08. Power Factor 0.9 withmains, Surge Protection Min 5KV along with Over voltage/ Overload,short circuit/ miss wiring protection. Compatible for pole mauling with outerdia of 40mm to 50mm. Universal Voltage driver to operate wide voltage rangefrom 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598,LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top accessstreet light with single screw to ensure ease of maintenance at the sight sitelocation with minimized minimal tools. LED Light fixture with W SystemPower consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminairemanufacturer should have in- house facility accredited by NABL / CPRI & anyGovernment certified agency & Design & Development facility certified byISO 9001:2008. Housing with supplier word mark / name shall be Engraved /Embossing on the die cast housing / Body part Warranty of 2 Years against anymanufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.

code11 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid