Directorate Of Municipal Administration Tender

code04 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 - 2.5 sq.mm

code05 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 - 4 sq.mm

code06 - Point wiring using Copper wire without switch - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet -- Short point upto 3Mtr from tapping point to out let via switch box

code07 - Point wiring using Copper wire without switch - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet -- Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch box

code08 - Point wiring using Copper wire without switch - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet -- Long point above 6Mtr upto 10Mtr from tapping point to outlet via switch box

code09 - Supplying of 4 feet -PVC Batten with integrated LED tube 20/22W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition

code10 - Supply of round/square recess/surface mounted rolling type LED Down light with 15-18W GU 10 LED Lamp Rib Fabricated from die cast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eyeball & LED Lamp position retained by circular wire spring,with Life of 25000 burning hours & 70 lumen maintenance with CRI80.Power Input:220-240V @ 50/60Hz & Power factor0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition

code11 - Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps - On wall/ ceiling / Rafter / Girders

code12 - Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way

code13 - Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16 Way

code14 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machines crews, bolts nutsetc., complete on the existing metal/PVC box. 10-12 Way

code15 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machines crews, bolts nutsetc., complete on the existing metal/PVC box.

code16 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model

code17 - Fixing a ceiling/wall mounting fan of all capacities and all types,with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5A.ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired

code18 - Fixing charges of post top/Gate/Garden fitting/LED on the existing CI/GI or any other pipe using required size of reducer,wiring using suitable wires

code19 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898. 6-32 A DP

code20 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898. 6-32 A TPN

code21 - Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.

code22 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A SP Switch

code23 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way Socket

code24 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

code25 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch

code26 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

code27 - Supplying and fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bakelite Ceiling Rose

code28 - Supplying and fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder

code29 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 16 A

code30 - Supplying and fixing regular MCB distribution boards on wall/woodboard/flush mounting using required clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. I - Single Door - 4 Way SP & N

code31 - Supplying and fixing regular MCB distribution boards on wall/woodboard/flush mounting using required clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. I - Single Door - 12 Way SP & N

code32 - Supplying & fixing of retrofit type-LED bulb......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degreeK, CRI70. efficacy80 lumen per W,life25000 burning hours and Compliance to IS 10322/IEC 60598, LM79 & LM80.The LED are driven by HF electronic driver integrated in the system,with PF0.95,power loss should5% of lamp Wage.,short circuit & open circuit protection to be integrated in the circuit,THD less than 20,Life as per LM79.The operating input voltage should be between 130 to 275V.BIS Approved and Tested by NABL/CPRI accredited laboratory with 2years Warranty against any manufacturing defect working under standard electrical condition. 7W, 6500K

code33 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000hr @ Lumen Maintenance of 70%,maximum light intensity should be between 60 degrees to 70 degrees.CCT5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaireIK08. Power Factor0.9 with mains,Surge Protection-Min 5KV alongwith Overvoltage/Overload, short circuit/miss-wiring protection.Compatible for pole mounting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application.Compliance to IS10322/IEC 60598,LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools.LED Light fixture with 40W System Power consumption.LED Efficiency1301m/w,nominal CRI75.Luminaire manufacturer should havein-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008.Housing with supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part.Warranty of 2Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source

code34 - Supplying and Fixing of 32 mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket streetlight fitting of all capacities to GI or GI or rail or RCC pole/wall using suitable clamps,bolts,and nuts and wiring using suitable capacity wires

code35 - Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

code36 - Labour Charges for Stringing of Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

code37 - LT 2 Pin Cross Arm - MS

code38 - 1.1 kV Ceramic Pin Insulator (Shell only

code39 - 1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator

code40 - Labour charges for Digging of Pit for Guy Set - Ordinary Soil

code41 - Anchor Rod using 12 mm rounds/Guy Rod - G

code42 - Labour charges for Fixing of GUY Set with break insulator using 2 nos of No. 15 Strain Insulator as per approved drawing.

code43 - LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW)

code44 - Labour charges for Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing - Ordinary Soil

code45 - Labour charges for Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

code46 - RCC Pole - 9 Mtr Long, 145 Kg WL

code47 - PSCC Pole - 8 Mtr Long, 140 Kg WL

code48 - Labour charges for Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth

code49 - HDPE/PLB Pipe 40/33 mm

code50 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)

code51 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - LT Cable 2.5 to 25 Sqmm

code52 - Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LT UG Cable - Up to 4C x 50 Sqmm

code53 - Pipe Grounding - GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg

code54 - Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

code55 - Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

code56 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost - In all kinds of soils Depth upto 1.50m