Directorate Of Municipal Administration Tender

hort. sr - Hedge & Edges : Developing hedges by digging trenches of size 0.45 x 0.5 filling 50% with of the trench excavated soil and remaking 50% with the mixture of sand LYM. Red earth on the proportion of 1:2:3 and planting.(Hort.SR 2020-21 I.No-11a Page No.63) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

hort. sr - Supply of plants like durantha and others ( rate as approved by horticulture department) in 5'8 inches polybags(Hort.SR 2020-21 I.No-4(13) Page No.11) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

hort. approved rate - Flowering and foliage shrubs planting digging of pits of size 0.45 x 0.45 x 0.45m and filling upto 50% with sand FYM red earth in the proportion of 1:2:3 and planting with well established rooted plants of min 1'6" length exculsive of plant.(Hort.SR 2020-21 I.No-5(a) Page No.61) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

hort. approved rate - Supply of plants like Bouganvalla, Hibiscus, Begonia, Pentas, Oleander, etc. Height 2 feet (NCS Lalbhag Bangalore Rate) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

hort. sr - Ground cover planting digging of pits of size 1.0 x 0.45m and filling upto 50% with sand FYM red earth in the proportion of 1:2:3 and planting with well established rooted plants of min 1'6" length exculsive of plant.(Hort.SR 2020-21 I.No-7(b) Page No.62) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

hort. approved rate - Supply of plants like Ayurveda Plants, Opeopogan, mayoori,opeopone green etc., (NCS Lalbhag Bangalore Rate) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

hort. approved rate - Tree plants planting digging of pits of size 1.0 x 0.45m and filling upto 50% with sand FYM red earth in the proportion of 1:2:3 and planting with well established rooted plants of min 1'6" length exculsive of plant. (Rate as approved by NCS, Lalbagh, Bangalore) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

hort. approved rate - Supply of specimen plants like Cycas, Starlight Picus, Picus Presitge, Picus panda, Bird of Paradise etc ( Rate as approved by NCS, Lalbagh, Bangalore) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Providing and fixing sadarahalli granite benches with back rest using supporting piece 2no of size (0.60x1.20x0.05) mtr sadarahalli granite to cutting to required shape and sitting slab size (1.55x0.45x0.05)mtr including grooves, nousing, chamfering, design of cutting, lining, metal paste gum, electrification charges and smooth finishing complete, including cost of materials, labour, transporting charges. Approved rate ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing open gym equipment - leg & thigh exercise/air walker made up of all tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scalloped as necessary and welded to a approved MIG process. All welds are dressed off removing all sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. All metal parts are powder coated using AKZO noble - grade wall powder to the thickness of 80 to 120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NACL solution in accordance to ISO 7227 to handle corrosion for 3000 hours. High quality grip rubber is used for the handles, maintainance free ball bearings scope of delivery:1 completely free assembled equipment model. Maintain according to EN 16630 and as per the maintanance guide. All product must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international ceritifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 cerificates mut be in the name of tendering party and not any 3rd party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size 1065*615*1364mm(min), weight 51kgs(min), safety area 4090*3555mm(min), capacity 1 person. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing open gym equipment- seated chest press made up of tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scalloped as necessary and welded to a approved MIG process. All welds are dressed off removing all sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. All metal parts are powder coated using AKZO noble - grade wall powder to the thickness of 80 to 120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NACL solution in accordance to ISO 7227 to handle corrosion for 3000 hours. High quality grip rubber is used for the handles, maintainance free ball bearings scope of delivery : 1 completely free assembled equipment model. Maintain according to EN 16630 and as per the maintanance guide. All product must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international ceritifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 cerificates mut be in the name of tendering party and not any 3rd party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size 1955*733*2058 mm(min), weight 86.6kgs(min), safety area 5545*4470 mm(min), capacity 2 person ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing open gym equipment - tai chi wheel made up of tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scalloped as necessary and welded to a approved MIG process. All welds are dressed off removing all sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. All metal parts are powder coated using AKZO noble - grade wall powder to the thickness of 80 to 120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NACL solution in accordance to ISO 7227 to handle corrosion for 3000 hours. High quality grip rubber is used for the handles, maintainance free ball bearings scope of delivery : 1 completely free assembled equipment model. Maintain according to EN 16630 and as per the maintanance guide. All product must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international ceritifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 cerificates mut be in the name of tendering party and not any 3rd party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size 1120*1150*1620 mm(min), weight 39kgs(min), safety area 3520*3550 mm(min), capacity 3 person. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing open gym equipment - Push and Pull of chair made up of tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scalloped as necessary and welded to a approved MIG process. All welds are dressed off removing all sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. All metal parts are powder coated using AKZO noble - grade wall powder to the thickness of 80 to 120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NACL solution in accordance to ISO 7227 to handle corrosion for 3000 hours. High quality grip rubber is used for the handles, maintainance free ball bearings scope of delivery : 1 completely free assembled equipment model. Maintain according to EN 16630 and as per the maintanance guide. All product must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international ceritifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 cerificates mut be in the name of tendering party and not any 3rd party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size 2570*805*2685 mm(min), weight 85.4 kgs(min), safety area 6287*4848 mm(min), capacity 2 person. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

9.40 v2 - Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification. vol 3, pg 65 9.40 ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

2.1.4 v1 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm and down size graded crushed coarse aggregates pg 59, vol 2, 2.1.5 ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

8.30 v2 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(P-46, I-8.30, SR 2023-24) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

8.34.3 - Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(P-46, I-8.34.3, vol 2 SR 2023-24) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

8.40 v2 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(P-47, I-8.40, vol 2 SR 2023-24) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK