Directorate Of Municipal Administration Tender

004 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including. preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in-charge PWD Common DSR 2023-24 VOl.2(Page No.48, I.No.8.39)

005 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 PWD Common DSR 2023-24 Volume 2 (P No: 119 I.No:13.15

006 - Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 90 mm long, weighing not less than 93 g PWD Common DSR 2023-24 Volume 2 (P No: 120 I.No:13.17.4)

007 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete ::PWD Common DSR 2023-24 Volume 2 (P No:117 I.No:13.5.2

008 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testingand commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excludingcost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or ected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete for PVC pipes 25mm dia, 10 kg/sqcm & class 5 PWD Common DSR 2023-24 Volume 5 (P No: 113 I.No:10.1.1

009 - Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments PWD Common DSR 2023-24 Volume 5 (P No: 117 I.No:10.9.1) 25 mm dia PVC Elbows

010 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments PWD Common DSR 2023-24 Volume 5 (P No: 117 I.No:10.10.1) 25 mm dia PVC Tee

011 - KSRB 13-11 Providing and placing on terrace, polyethylene water storage tanks as per IS12701 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM and testing complete as per specifications. (For 1000 litre capacity) Specification No.KBS 13.22[ Pg96,I.No 13.78] 2018-19

012 - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.KPWD Common DSR 2023-24 Volume 1 (P No: 7 I.No:1.8 )

013 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including onstruction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work..KPWD Common DSR 2023-24 Volume 3 (P No: 149 I.No:16.28)