Directorate Of Municipal Administration Tender

004 - GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete Minimum Weight of GI Pipe: 7.3 Kgs (labour charges) ESCOM SR 2023-25

005 - Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 35.01) Up to 4C x 50 Sqmm (material charges) ESCOM SR 2023-25

006 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. 1.6.1) In all kinds of soils. Depth upto 1.50m item no.1.6.1 page no. 6 vol 1 (labour charges) PWD civil SR 2023-24 Specification : 1550*0.5*0.6=465 cum

007 - Dismantlimg of flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials seperately by manual means, bituminous course vol 3 page no. 11 PWD civil SR 2023-24 Specification : 30*0.5*0.6=9 cum

008 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 1.4.1) In all kinds of soils Depth upto 1.5 m Dimension=(1X0.60x0.60x1.20)=0.43 cum*65poles= 27.95cum total item no.1.4.1 page no. 5 vol 1 (labour charges) PWD civil SR 2023-24

009 - Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.2) Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates item no.2.1.2 page no. 15 vol 1 (labour charges) PWD civil SR 2023-24 Dimension-1X 0.60 X 0.60X0.05=0.018cum *65poles= 1.170cum

010 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. 2.11.h) All other type of structures item no.2.11, h page no. 18 vol 1 (labour charges) PWD civil SR 2023-24 MHM dimension 12mm -8 No X 1.50 X 0.89=10.68 8mm -8 No X[ (0.45*4)-0.2+0.1]X 0.39 = 5.30 Total- 15.98 K.g=0.0162 Tonne *65poles= 1.053 tonne

011 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. 2.2.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Diemension- 0.47 X 0.47 X 1.50= 0.33 Cum*65poles= 21.45cum item no.2.2.1 page no. 15 vol 1 (labour charges) PWD civil SR 2023-24

012 - Centering, shuttering, formwork for foundation,sub structure of cross drainages. 5% of the finished concrete item rate Diemension- 4 X 0.46 X 1.54 =2.83 sq mtr *65poles= 183.95 Sqmtr

013 - Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom . mm , top. mm with 3 mm thick, suitable base plate and 4Nos of . long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 4.2.6) 8 meters - Top 70mm and bottom 135mm dia PWD SR 2023-24 Page No.10 Item code 4.2.6

014 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. 4.6.2) Single Arm Bracket with 1500 mm Standard 40/50 mm dia PWD SR 2023-24 Page No.12Item code 4.6.2

015 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 2.5.2)3C X 1.5Sq.mm PWD SR 2023-24 Page No. 5 Item code 2.5.2

016 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.3.4) 4 mm PWD SR 2023-24 Page No. 4 Item code 2.3.4

017 - Supply of LED streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material Burning Hrs 50000 hr Lumen Maintenance of 70perc CCT greater than 5500K, IP 66 Power Factor greater than0.9. Compliance to IS 10322 IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. LED Efficiencygreater than 1301mperw, nominal CRI greater than75. Luminaire manufacturer should have in house facility accredited by NABL CPRI & any Government certified agency Design Development facility certified by ISO 9001-2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years should be given by LED manufacturer Cree Nichia Lumileds Osram make LED Source. 11.8.5) LED streetlight 120W PWD SR 2023 24 PgNo46 Item code 11.8.5

018 - Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the forcement rods byusing binding wires and unused ways of junction boxes and pipeends should be covered using PVC end enclosures, run with18SWG GI fish wire wherever necessary 1.2.4) 40 mm dia 2.5 mm thick PWD SR 2023-24 Page No. 1 Item code 1.2.4

019 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32Amps PWD SR 2023-24 Page No.14 Item code5.7.2

020 - Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 5.13.2) 40 Amps PWD SR 2023-24 Page No.16 IItem code 5.13.2

021 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5.18.8) 40 A TPN PWD SR 2023-24 Page No. 17 IItem code 5.18.8

022 - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. PWD SR 2023-24 Page No.21 Item code 5.47

023 - Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. PWD SR 2023-24 Page No. 9 IItem code 3.9

024 - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 5.42.2) 16SWG PWD SR 2023-24 Page No.20 IItem code5.42.2

025 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5.41.1) 40 x 40 x 6 mm PWD SR 2023-24 Page No.20 IItem code5.41.1