Directorate Of Municipal Administration Tender

code04 - Cutting of Trees, excluding removal of stumps and roots of trees, Girth above 1800 mm

code05 - Removal of stumps and roots including backfilling with suitable material to required compaction,Girth above 1800 mm

code06 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m (0.2*0.4*270)+(0.6*1.2*0.8*18)

code07 - Dismantling of Flexible Pavements,Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately,II By Mechanical Means,A Bituminous course (0.2*0.4*270)+(0.6*0.4*0.8*18)

code08 - Dismantling of Cement Concrete Pavement,Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantled materials and stacking serviceable and unserviceable materials separately (0.2*0.4*270)+(0.6*0.4*0.8*18)

code09 - Supplying and laying of HDPE/PLB Pipe 40/33 mm in the already excavated surface

code10 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:1990, 3cx1,5 sqmm

code11 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Wet Mix Macadam (Plant mix method)

code12 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates (0.2*0.4*270)+(0.6*0.3*0.8*18)

code13 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (0.6*0.9*0.8*18)

code14 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures

code15 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm Long Barrel

code16 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. Light Duty GI pipe of 40mm dia

code17 - Supplying,andfixingofHotdipGalvanizedM.S.BracketsuitableforoutdoorluminariesandmountedonOctagonalpoleusingnecessarybolts, nuts etc., complete.Single Arm Bracket with 1000 mm Standard 40/50 mm dia

code18 - Fabricating,supplyinganderectionof...mslonghotdipGalvanizedOctagonalhotdipPolewithBSEN10025gradeS355JOsteelplateforshaft,IS2062forbaseplatewithdooropeningarrangements,includingsuitableboards,BakelitesheetandMCBsasperISspecificationssuitabletowithstandthewindspeedof47m/sfor.......mPoleinsinglesectionandsinglejointweldedasperIS9595/IS10178AWShavingdimensionsbottom.....mm,top....mmwith3mmthick,suitablebaseplateand4Nosof.....longJboltsalongwithtemplateandthePoleshallbehotdipgalvanizedinsingledippingwithnotlessthan65micronasperASTM-A123and153etc.,(excluding foundation) as per drawing appended. 8 m - Top 70 mm and Bottom 135 mm dia

code19 - Paintingofexistingstreetlightpoleafterscrappingtheoldpaintandpaintedwithsuitablecolourenamel/Silverpaintincludingcoping/footing of the pole. upto 5 m street light pole.

code20 - Paintingofexistingstreetlightpoleafterscrappingtheoldpaintandpaintedwithsuitablecolourenamel/Silverpaintincludingcoping/footing of the pole. 8 m and above street light pole.

code21 - Providing,welding ,fixing Baseplate, J-Bolts suitable to already painted pole and Erection of painted pole on the foundation using necessary j bolts of required size and all accessories complete.

code22 - Removing the already situated exisiting pole, loading from the designated site to paint shop,transporting the painted pole, unloading to the designated site and Erection of the pole to the already laid foundation as per direction of Engineer -In -Charge

code23 - Fabricating,supplying and erection of...ms longhot dip Galvanized Octagonal hot dip Pole with BSEN 10025 gradeS355JOsteelplateforshaft,IS2062forbaseplatewithdooropeningarrangements,includingsuitableboards,BakelitesheetandMCBsasperISspecificationssuitabletowithstandthewindspeedof47m/sfor.......mPoleinsinglesectionandsinglejointweldedasperIS9595/IS10178AWShavingdimensionsbottom.....mm,top....mmwith3mmthick,suitablebaseplateand4Nosof.....longJboltsalongwithtemplateandthePoleshallbehotdipgalvanizedinsingledippingwithnotlessthan65micronasperASTM-A123and153etc.,(excluding foundation) as per drawing appended. 7 m - Top 70 mm and Bottom 130 mm dia

code24 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Typecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10KandcompletewiringasrequiredconfirmingtoIEC60898. 6-32 A SP

code25 - Compression type Aluminium Tubular in Line Connector for Aluminum Conductor16 Sqmm

code26 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications

code27 - Fabrication,Supplying,Erection,TestingandCommissioningof......mslongPolygonhighmastwithSingle/Multipletelescopicsectionshaving,(minimumoverlapdistanceof1.5timesoftopsection)thicknessasperBSEN10025grades355JO/ASTMA572-50steelsheetplateforshaftsuitabletowithstandawindvelocityof47m/sasperIS875part3(asperGADrawing).BaseplateasperIS2062/ASTMA572-50.ThemastshallbeGalvanizedinsingleHot-dipasperBSENISO1461/ASTMA123withanaverage70micronsasperIS2629,andweldedasperBS5135SingleL-SeamjointThemastshallhave2WayheadframewithdiecastLM-6pulleys,stainlesssteelaxle,PhosphorusBronzebearingbushpress-fittedwithseparateguidesfor2runsof5mmdia,stainlesssteelwireropeofAISI304grade7/19-core,(FactorofSafetyasperTRno-7).2.5mm2EPRinsulatedPCPsheathedtrailingpowercablehousedinsidethebottomshaftofmastwithdoorhavinglockingarrangementThemastshallhavemanual/powertool(Suitablereversiblegearedmotoroperatingon230/415V,50Hz,shallbeprovideabove15Mtrmast)Themastshallhavelanternof2segments,suitablediawithmaxloadcarryingcapacityasperIS1239.ThemastshallbeerectedonexistingRCCfooting.Themastshallbesuppliedwith3mmthicktemplate,lightningarresterof1.2mlengthgalvanizedpipewithtoparrowfittedontopoftheheadframecoverandGLStypeaviationtwinlAfittingwithwiringcomplete.(excludingfoundation)asper technical data. 12 m/12.5 m - Top 100 mm and Bottom 310 mm dia

code28 - Supplying,andfixingofHotdipGalvanizedM.S.BracketsuitableforoutdoorluminariesandmountedonOctagonalpoleusingnecessarybolts, nuts etc., complete. Single Arm Bracket with 1500 mm Standard 40/50 mm dia

code29 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic gradeflexiblecopperwithlowconductorconfirmingtoIS8130-1984and(Virgin)PVCinsulationsheathedsuitableforworking voltage upto 1100 Volts as per IS-694:1990 2C x 1.5 mm2

code30 - FabricatingsupplyingandmountingMSboxmadeout....SWGsuitableforfloor/wallmounting,fullyweatherproofwithprovisionforbetterheatdissipation,providedwithhingedfrontcover,equippedwithtamperprooflockingarrangements,withsuitablesizeclampswithnecessarycableentrypipewithglandandboxshouldbefinishedwith7tankstreatmentwithpowdercoatedpaintand finally finished with approved colour etc., complete.14 SWG

code31 - Supplying.........Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM.S.flatframeworkinexistingpanelboard.ThebusbarshallhavesuitableholesforterminationofincomingandoutgoingcablesasperISspecification with necessary bolts, nuts and washers etc., 100 A 4 x 30 x 6 mm Aluminium Strips

code32 - SupplyingandfixingangleironframeworkfabricatedoutofM.S.angleiron..andM.S.Flat......withbolts,washersetc.,andpaintedwith 2 coats of red oxide and then two coats of approved paint 40 x 40 x 6 mm

code33 - Supplying4mmthickplasticsheetwithnecessarynitchesforfixingswitches,regulatorsetc,andfixingonexistingwoodenormetal box using N.F. screws.

code34 - Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross 3withShortcircuitbreakingcapacityof10KandcompletewiringasrequiredconfirmingtoIEC60898. 50-63 A TPN

code35 - SupplyingofmultifunctiondigitalmeterwiththreelinebacklightLCDtypedisplayforvoltage,Current,frequency,Power,powerfactor,kVA,kWH,kVARsuitablefor3phase,4wireLTnetworkwithIP54degreeofprotectionandcompletelywiredasrequiredwithcommunication Port and Class 0.5s accuracy

code36 - SupplyingandfixingofLEDtypepanelboardindicatinglampwith required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

code37 - SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS81301984and(Virgin)PVCinsulationsheathedsuitableforworking voltage upto 1100 Volts as per IS-694:1990 3C x 4 mm2

code38 - Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers 63 A

code39 - Supplying,fixing and wiring Electronic Trivector Meter(ETV) 5to20A single phase Class-1A ccuracy withTemperProofEnergyMeter.

code40 - Supplying and fixing ElectronicTrivector Meter(ETV)suitable foroperation LT operation and-Ctoperated meter in poly carbonate body in class0.5 accuracy as per IS14697 and completely wired.