Directorate Of Municipal Administration Tender

Vol-1 Item Code: 1.9 P. No:17 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Vol-2 Item Code: 8.3.1 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including cost ofmaterials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

Vol-2Item Code: 9.21.2 - Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (waterbased) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm

Vol-2 Item Code :13.50.6 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of j 50 mm nominal dia Pipes

Vol-2 Item Code :13.50.4 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of j 32 mm nominal dia Pipes

Vol-1 Item Code :2.3.2 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications, M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Vol-1 Item Code :2.11 - Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.

Vol-2 Item Code :7.1 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m²

Vol-2 Item Code :11.16.2 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Vol-2 Item Code :11.35.1.2 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.

Vol-2 Item Code :11.37.3 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications.

Vol-2 Item Code :11.30.2 - Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge.

Rate quotation -Item no:01 - 1.0 HP MONOBLOCK RAW WATER PUMP To feed the Dual Media Filter at pressure more than 2.0 bar, which is min. operating pressure for filter. Make: CRI / SHAKTI/SURAJ/TORMAC

Rate quotation -Item no:02 - VESSUL :- Make: a) Advance composite/Painter equal (b) Material of Construction: FRP (c) Size 13*54 (d) Testing Pressure: 8 kg/cm 2 (e) Opening: Top

Rate quotation -Item no:03 - DOSING PUMP . 0-6 LPH . Make : Edose/ Initiative

Rate quotation -Item no:04 - ANTI SCALANT LIQUID . To dose anti scaling chemical to protect the scaling formation on RO membranes

Rate quotation -Item no:05 - JUMBO HOUSING:- 20 Long of 4 Dia filter housing, 1*1/2 both end opening With pressure meter, Air relies valve, Make: News/ Hydro/Lotus/UKL

Rate quotation -Item no:06 - JUMBO CANDLE . To remove the fine particles up to 05 micros and reduce silt density index level to acceptable level, Spun PP Micron Cartridge filter , 20” Long of 4” Dia micron filter, Micron size of 20.5, Make: Lotus / UKL

Rate quotation -Item no:07 - HIGH PRESSURE PUMP REPAIR - TC BUSH / IMPLER / CARBON BUSH /SHAFT/BEARING

Rate quotation -Item no:08 - HIGH PRESSURE MOTOR WINDING

Rate quotation -Item no:09 - 8 RO MEMBREANE : To remove the major part of TDS upto98 by Reverse Osmosis Membranes arranged and designed to give adequate flow and recovery. 8” Dia with 40” Long Make : HYDRONAUTICS / CRI / HYDROMEM / CSM / FILMTEC/HITECH

Rate quotation -Item no:10 - PANEL BOARD - Automatic and Manual Control Panel with flow meter, TDS Meter, pressure meter, auto flushing, on off switch, Tank Full Indicator,LPS,Power Make : ASTRA / RO PANEL / INITATIVE

Rate quotation -Item no:12 - COIN VENDING MACHINE. FOR WATER DISSPENCING . MAKE; INITATIVE/ SINDHU

Rate quotation - 75 SS SOLONIDE VALVE , To control the automatic cut off the point, Make: AIRA /UFLOW

Rate quotation -Item no:13 - Providing & Fixing all Pipe Fittings , 1 1/2”,1 1/4’’,1’’,3/4’’, 25'' Elbows, Tee MTA,FTA,COLUR,BALLWALVES, PIPES,END CAPS,TEFLON TAPES, SOLVENT,BRASS BALLWALVES,AIR WALVES

Rate quotation -Item no:14 - SAND - To remove the total suspended solids, dirt iron and Reduce slit density index which can foul the membranes

Rate quotation -Item no:15 - CARBON - To remove the total color, smell, odor from the water