Directorate Of Municipal Administration Tender

Code 04 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (P No. 26 Item No. 4.17 PWD SR 2023-24 Volume-3)

Code 05 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(Page No. 18 Item No. 2.11h PWD SR 2023-24 Volume- 1)

Code 06 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work.(Page No.149 Item No.16.28 PWD SR 2023-24 Volume- 3)

Code 07 - Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications Stone/Boulder (Page No. 129 Item No. 14.4 A PWD SR 2023-24 Volume- 3).

Code 08 - Fabricating, supplying and erection of. …. ms long hot dipGalvanized Octagonal hot dip Pole with BSEN10025 gradeS355JO steel plate for shaft, IS2062 for base plate withdoor opening arrangements, including suitable boards,Bakelite sheet and MCB as per IS specifications suitable towith stand the wind speed of 47m/s for.m Pole in singlesection and single joint welded as per IS9595/IS10178AW Shaving dimensions bottom 210mm, top 90mm with 3mm thick, suitable base plate and 4Nos of.long J bolts alongwith template and the Pole shall be hot dip galvanized in single dipping with not less than 65 micron as per ASTMA123 and 153 etc., (excluding foundation) as per drawing appended. 10 M - Top 70 mm and Bottom 175 mm dia PWD:EL:SR:2-2023-24, Page No:11, It No:4.2.8

Code 09 - Supplying, and fixing of Hot dip Galvanized M.S. Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete Double Arm Bracket with 2000 mm Standard 40/50 mm dia PWD:EL:SR: 2023-24, Page No:13, It No:4.6.6

Code 10 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A DP PWD:EL:SR: 2023-24, Page No:17, It No:5.18.1

Code 11 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers PWD:EL:SR: 2023-24, Page No:21, It No:5.48

Code 12 - Supply of LED floodlight luminaire with pressure die casta luminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light output Rated life Burning Hrs 50000hr at Lumen Maintenance of 70%, CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK 08. Power Factor 0.9 with mains, Surge Protection - Min 5KV along with Over voltage/ Over load, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60 Hz application. Compliance to IS 10322/ IEC60598, LM79 and LM80 Adherence with RoHS.UL approved MCPCB. Top access streetlight with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture wit W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should haveinhouse facility accredited by NABL/ CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark/ name shall be Engraved/ Embossing on the diecast housing/ Body part Warranty of 2 Years against any manufacturing defectshould be given by LED manufacturer &Cree/ Nichia/ Lumileds/ Osram make LED Source. LED Floodlight 150W PWD:EL:SR:2023-24, Page No:46, It No:11.9.4

Code 13 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 1.5 mm2 PWD:EL:SR: 2023-24, Page No:6, It No:2.5.2

Code 14 - Supply and Installation /Fixing/ Provision of Outdoor typeThermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (Weather Proof), rustproof, dustproof, waterproof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase/ Three Phase Energy Meter in suitable base plate and having a provision for Fuse/ MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility 300 mm x 450 mm x 214 mm PWD:EL:SR:2023-24, Page No:21, It No:5.44.2

Code 15 - Earth work excavation for pipelines/cables by Manual means upto 600 mmtrench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m PWD: SR: ( Vol - 1) 2023-24,Page No:6 :IT No:1.6.1

Code 16 - Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete thework as per technical specifications. KBS PWD: SR: ( Vol - 1) 2023-24, ,Page No:15 IT No:2.1.3

Code 17 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures PWD: SR: ( Vol - 1) 2023-24 , ,Page No:18, IT No:2.11(h)

Code 18 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.6 PWD: SR: ( Vol - 1) 2023-24 , ,Page No:16, IT No:2.3.1