Directorate Of Municipal Administration Tender

code04 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sub structure of Bridges i c. p- 15 V-I CSR 2023-24

code05 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates i 2.3.2 p-16

code06 - Supplying, fixing, Wiring, earth electrode for grounding conduits, I.C.cutouts & other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit …. The pit should be filled with equal proportion of salt & charcoal 150mm all -round the pipe to compete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers & check nuts etc., the pipe shall have 16 through holes of 122mm dia. (P-54, I-12.56) V-6 CSR 2023-24

code07 - Supplying 1.1kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. a) 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm) i 32.03 p-13 ESCOMs SR 2023-24

code08 - b) 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) i 32.05

code09 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 2.5 to 25 Sqmm i 21.05

code10 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 4C x 2.5 mm2 i 2.5.9 p-6

code11 - B) 3C x 2.5 mm2 i 2.5.8

code12 - Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm, top.... mm with 3 mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. a) 8 m - Top 70 mm and Bottom 135 mm dia i 4.4.6 p-12 PWD Ele SR 2-23-24

code13 - b) 9 m - Top 70 mm and Bottom 155 mm dia i 4.4.7

code14 - Supplying and fixing of Hot dip Galvanized M.S. Bracket suitable for outdoor luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. A) Single Arm Bracket with 1000 mm Standard 40/50 mm dia i 4.6.1 p-13 PWD Ele SR 2-23-24

code15 - B) Single Arm Bracket with 1500 mm Standard 40/50 mm dia i 4.6.2

code16 - C) Double Arm Bracket with 1000 mm Standard 40/50 mm dia i 4.6.4

code17 - Fabrication, Supplying, Erection, Testing and Commissioning of 16 m - Top 150 mm and Bottom 410 mm dia ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data. 16 m - Top 150 mm and Bottom 410 mm dia i 4.5.2 p-13 PWD Ele SR 2-23-24

code18 - Fixing halogen/metalhalide/SVL/IL/LED floodlight fitting over existing pole/wall ceiling including clamps,bolts,nuts and wiring using suitable capacity wires. I 13.5 p-56

code19 - Fabricating supplying and mounting MS box made out 16SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. ( P-20, I-5.42.2) V-6 CSr 2023-24

code20 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross -3 with short circuit breaking capacity of 10K & complete wiring required. ( P-17, I-5.18.7) 5-32Amps TPN

code21 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete.( P-14, I-5.7.1)16Amps

code22 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete. ( P-16, I-5.14.1)25Amps

code23 - RCC Pole - 8 Mtr Long, 115 Kg WL (Dwg No. BESCOM/GM/QS&S/05 Dtd 24.11.2018) as per IS-785 i 1.03 p-3 ESCOMs SR 2023-24

code24 - LT 4 Pin Cross Arm - MS(Dwg No. BESCOM/GM/QS&S/32 Dtd 24.11.2018) i 2.05

code25 - Spiral Earth Electrode i 2.16

code26 - RCC Pole Clamp - MS(Dwg No. BESCOM/GM/QS&S/30 Dtd 24.11.2018) i 5.01

code27 - Guy Clamp - MS(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) i 5.09

code28 - Anchor Rod using 12 mm rounds/Guy Rod - MS(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) i 5.12

code29 - Turn Buckle (GI)(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) i 5.11

code30 - Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric: 1.1 kV Ceramic Pin Insulator (Shell only) i 6.03

code31 - 1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator i 6.04

code32 - No. 8 Strain Insulator i 6.07

code33 - ACSR Conductor as per IS-398 (Part - 2/1996): Weasel ACSR(6/2.59 mm Al + 1/2.59 mm St), Std Wt: 128 Kg/KM i 7.01

code34 - Guy Wire & GI Wire as per IS-2141: 7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM i 8.01

code35 - Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Hard Soil i 1.2.2

code36 - Digging of Pit for GUY SET Hard Soil i 1.7.2

code37 - Erection of Poles: Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth i 2.01

code38 - Fixing of 4 Pin cross arm with Insulator and Braces fixing i 5.02

code39 - Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) i 5.10

code40 - Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps. I 6.01

code41 - Supplying and fixing J bolt M24x750 suitable for base plate and including 155mm dia bolts with necessary washers as per ASTM-A123 and 153 etc.,Instruction of Engineer in charge of work. Data rate 2021-22

code42 - Erection of 9mtr/8mtr street light poles, Works including lifting by crane, transporting to work spot and erection of pole on existing foundation. (with in 8km from released spot) as per drawing appended and As per the engineer in charge. Data rate 2021-22

code43 - Dismantling of 12/16 mtr high mast by removing light fittings, lantern carriage, junction boxes connections and contol cable. remove the foundation nuts with holding the pole by crane support, release the pole, electrical panel transport to work location as per the engineer in charge direction. erection of pole on existing foundation and panel complete work. (with in 8km from released spot) as per drawing appended and As per the engineer in charge. Data rate 2024-25