Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,33,000Document Cost
Refer DocumentsTender Fee
₹ 3,880
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/EL/WORK_INDENT33962Tender No
DMA/2024-25/EL/WORK_INDENT33962Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SR 2023-24
2.8856
92140
265881.232776
... More
code05 - 1.6 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated
surfaces, disposing off or leveling the excavated earth or sorting
& stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.
4000
498
1994080
... More
code06 - Supply and laying Double walled corrugated (DWC) HDPE pipe including all necessary conneting sockets/couplings tees/Bends/End-caps of same materials in existing trench as per IS 14930 part-II suitable for drawing underground cables 40mm OD/32MM ID (Page N
4000
100
403760
... More
code07 - Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for ....... m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top ... mm with 3 mm thick, suitable base plate and 4Nos of.........long J
bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc.,(excluding foundation) as per drawing appended. 9 m - Top 75 mm and Bottom 165 mm dia
114
21115
2407110
... More
code08 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. LED Streetlight 170 W
228
19434
4430961.12
... More
code09 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires
228
166
38044.08
... More
code10 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000 mm Standard 40/50 mm dia
114
3914
446196
... More
code11 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 2.5 mm2
1500
116
174585
... More
code12 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm
772
3
2385.48
... More
code13 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN
127
1768
224600.77
... More
code14 - Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets. 200 mm x 200 mm x 98 mm
114
2369
270066
... More
code15 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.
4
4988
19953.16
... More
code16 - Spiral Earth Electrode
114
246
28063.38
... More
code17 - Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)
114
95
10920.06
... More
code18 - Guy Wire & GI Wire as per IS-2141
8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM
0.3
77291
23187.36
... More
code19 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)
3.75
146097
547864.725
... More
code20 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm)
0.5
185239
92619.66
... More
code21 - Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm
192
27
5339.52
... More
code22 - Aluminium End Terminal (Lug).16 Sqmm
1016
2
2092.96
... More
code23 - Brass Cable Gland. 25 mm
266
81
21644.42
... More
code24 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. Heavy Duty GI pipe of 50mm dia
100
699
69937
... More
code25 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm
5
21512
107562.9
... More
code26 - Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG
340000
-
176800
... More
code27 - Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
16
578
9261.76
... More
code28 - Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and - CT operated meter in polycarbonate body in class0.5 accuracy as per IS 14697 and completely wired.
4
4521
18086.8
... More
code29 - Supplying and fixing of Shunt trip suitable for MCCB.CBCT
4
1754
7016.36
... More
code30 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board.
4
9532
38130.6
... More
code31 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C
12
530
6365.4
... More
code32 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP
16
427
6839.2
... More
code33 - Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy
4
9594
38377.8
... More
code34 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 100 A 25 kA
4
8741
34966.44
... More
code35 - Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips
6
2538
15233.7
... More
code36 - Rotary handle for MCCB
4
3860
15441.76
... More
code37 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN
24
3180
76335.36
... More
code38 - Supplying of on load change over switches 4poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A
4
8790
35160.08
... More
code39 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP
8
1091
8734.4
... More
code40 - Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm
45
406
18308.25
... More
code41 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts
10
4383
43836.8
... More
code42 - GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 3 mm GI strip
290
84
24493.4
... More
code43 - Licensing Work- KEB Deposit, Road Cutting Deposit and other charges
1
265000
265000
... More
code44 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work . In all kinds of soils Depth upto 3 m (COMMON SR 2021-22, Vol-1 Sl.No. 1.14.1,P.No - 8)
7.2
93
674.856
... More
code45 - Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (COMMON SR 2021-22 Vol-1, P.NO -15, Item No -2.1.3)
0.3374
6168
2081.309258
... More
code46 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (COMMON SR 2021-22 Vol-1, P.NO -17, Item No -2.4.2)
3.375
6512
21980.32875
... More
code47 - Appendix I Additionalities for Formwork, Centering & Scaffolding -Bridges-SI.No.6-Box Culvert 5% (Pg No:116)
3.375
325
1099.00125
... More
code48 - Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. Section1600 &2200 (PWD SR 2021-22 Vol-3, P.NO -99, Item No -13.1)
0.3375
92140
31097.489625
... More
code49 - Fabrication, Supplying and Erection Testing and commissioning of12 m/12.5 m long polygon high mast with single /mutiple telescopic sections having (minimum overlap distance of 1.5 times of top section) thickness sa per BSEN 10025 grade S 355JO /ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/sec as per IS 875 part 3( As per GA Drawing ).Base plate as per IS 2062/ASTM A572-50.The mast shall bi galvanized in single hot dip as per BSEN ISO 1461/ASTM A123 with an average 70microns as per IS 2629, and welded as per BS 5135 single L seam joint.The mast shall have 2 way head frame with die cast LM-6 pulleys, stainless steel axle,Phoshorus Bronze bearing bush press -fitted with separte guides for 2 runs of 5mm dis,stainless steelwire rope of AISI 304 grade 7/19-core,(Factor of safety as per TR no-7).2.5 sqmm EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement .The mast shall have power tool operting on 230/415 V,50Hz 1/3 phases reversible geared motor .The mast shall have lantern of 2 segments ,suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing .The mast shall be supplied with 3mm thick template,lighting arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin lamps fitting with wiring complete.(excludoing foundation )as per technical data 12 m/12.5 m - Top 100 mm and Bottom 310 mm dia
1
134930
134930
... More
code50 - Supply of 240W LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains,Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatiblefor pole mauling with outer dia of 40mm to 50mm. UniversalVoltage driver to operate wide voltage range from 100 V to 270V50/60Hz applicatio. Compliance to IS 10322/ IEC 60598,LM 79 & LM 80 Adherence with RoHS. UL approvedMCPCB. Top access street light with single screw to ensureease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & evelopment facility certified by ISO 9001:2008. Housing with supplier word mark / name shall beEngraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ PWD (Ele.) SSR Page 37 item No.11.9.7
8
22730
181840.32
... More
code51 - Fixing halogen/metal halide floodlight fitting over existing pole /wall celling including clamps bolts and nuts and wiring using suitable capacity wires complete.
8
166
1334.88
... More
code52 - Supplying & fixing of Porcelain fuse channel with cut on existing wooden /panel using necessary nuts, bolts and wasgers etc., complete.C) 63Amps
6
413
2478.18
... More
code53 - Supplying & fixing and wiring earth electrode for grounding conduits I.C cutouts and other equipments on the meterboard using 40mm dia 2.9mm thick GI pipe 2.5mtr long buried in a pit.The pit should be fitted with equal proportion of salt and charocal 150mm around the pipe to complete depth.The connection from pipe to the conduit etc, is to be established through IG wire of size as per IS specificationm7.3.3 of IS 732 using 12mm dia bolts,nuts,washers and check nuts etc..,the pipe shall have 16 through holes of 12mm dia
2
3089
6179.38
... More
code54 - Supplying & running GI/copper conductor for grounding connections, Using necessary fixing materials as required25x3 mm Copper strip
20
520
10403
... More
code55 - Supplying of 1.1Kv LT UG cable having aluminium conductor PVC insulated, sheated,galvanized steel strip (Except 2CX10Sqmm wire aroured) confiriming to IS -3975:1990(No of strip indicated in GTP N& extruded PVC outer sheated armoured cable with spcified IS 1554 Part 1:1988 & confirming to GTP of Group A 4 core 10 sqmm
22
133
2945.8
... More
code56 - Labour charges for laying of 1.1 KV class UG cable in existing trench Gipipe /stoneware pipe /on pole as required I) existing trench/duct.A) 6sqmm to 16 sqmm
26
12
317.98
... More
code57 - Digging of trenche of 0.6m deep x 0.50 Mtr wide refilling the trench to the required ground level and consolidating etc…,complete
20
78
1565.6
... More
code58 - HDPE pipes 90MM dia
12
139
1668.6
... More
code59 - Supplying fixing and wiring 3phase Digital ammetrt voltmeter
1
732
732.33
... More
code60 - Supplying fixing L.T cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen /insulating compound complete with terminals, clamps,bolts,nuts,and washersetc...
1
360
360.5
... More
code61 - Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting ,fully weather proof with provision for better heat dissipation ,provided with hinged front cover ,equipped with tamper proof locking arrangements,with suitable size clamps with necessary cable entry pipe with gland and should be finished with 2 coats of red oxide primer paint and finally finished with apporved colour enameled metal paint etc... complete
20000
-
8800
... More
code62 - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.
1
2384
2384.45
... More
code63 - Supplying and fixing and wiring Eart leatage miniature circuit breaker (ELMAB.,) 240.450V up to 300me sensitivity on existing wood panel board. 32-40 Amps 4 pole
1
5415
5415.74
... More
code64 - Supplying and fixing Regular MCB distribution Boards on wall /aood Board / flush mounting using require clamps bolts nuts with provision for fixing suitable type capacity MCB SINGLE PHASE/ 3 phase /single dooe with powder coated painting Made out of 14 SWG MS enslouse..
1
1918
1918.89
... More
code65 - Supplying and fixing angle iron frame fabricated out of S angle iron and M.S flat with bolt washer etc and painted with 2 coat of red oxide and then two coats of apporved paint 50X50X6mm
8
406
3254.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%