Directorate Of Municipal Administration Tender

code04 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of Steel reinforcement and fom work to be paid

code05 - Supplying Fitting and placing uncoated TMT Fe500 and above bar reinforcement in foundation complete as per Drawing and technical specification including cost and conveyance of all materials labour hire charges of Machineries and equipments with all lead and lifts loading and unloading charges etc complete as directed as per specification and direction engineer in charge of the work

code06 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m Including cost of all labour complete as per specifications

code07 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc complete. Double Arm Bracket with 1000 mm Standard 40/50 mm dia

code08 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70 percentage CCT Greater than 5500K IP 66 optical and electrical compartment and impact resistance of complete luminaire Greater-than IK08. Power Factor Greater-than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 and LM 80 Adherence with Ro HS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency Greater-than 1301m/w, nominal CRI Greater-than 75. Luminaire manufacturer should have in-house facility accredited by NABL / CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree/Nichia/ Lumileds/Osram make LED Source. LED Floodlight 200W

code09 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40AMPS TPN

code10 - Supplying of 1.1 KV LT UG cable XLPE or Heat resistantPVC insulated, PVC extruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouringstrip thickness in average plus 5 percentage and resistivity 14 Ohms/Kms(Max) as per IS-3975 4 core 16 Sqmm

code11 - Supplying and Fixing Chemical earthling for grounding. Conduits, IC cut-outs and other equipments backfill compound which is noncorrosive, thermally conductive, potential to permissible limits superior Fault conduction capacity, non toxic, weather resistance and capable of achieving ohmic value less than one ohm Using 4ft SS rod with backfill compound

code12 - Supplying aand fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts bolts and washers.32A

code13 - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc) 3-120sec setting

code14 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.

code15 - Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse /MCB cut-out with suitable transparent hinged flap opening foroperating MCB along with complete tamper proof SEALING facility.

code16 - Labour charges for laying of 1.1 KV Class UG Cable 6 SQMT to 16 Sqmm

code17 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 confirming to latest amendments

code18 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts

code19 - Supplying and running GI/Copper Conductor for grounding and (Along with other wires in conduit system of wiring )using necessary suitable size clamps, nails, guttas /spacers etc

code20 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter.

code21 - Supplying heavy gauge PVC conduit pipe mm 40 mm dia 2.5 mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc. and runningbefore concreting the slab. The conduit should be tied to thereinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary

code22 - 1.1KV Class HR (Heat Resistant ) PVC I nsulated and Sheathed Aluminium single core Lead Wires as per IS 694 2010 373 48.03 PVC Wire 6Sqmm Weight per 100 Mtr coil 3.5 Kg