Directorate Of Municipal Administration Tender

004 - FormWork: As Per Recomadation of technical working group, rates for form work shall be dded on percentage basis to the fininshed concrete item rates Foundation, Sub structure of Cross drainages Consider As 5%. PWD Common DSR 2023-24 Volume 1 (P No: 111 I.No:3 )

005 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand).PWD Common DSR 2023-24 Volume 2 (P No: 9 I.No:5.1.1 )

006 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.PWD Common DSR 2023-24 Volume 1 (P No: 16 I.No:2.5.1 )

007 - FormWork: As Per Recomadation of technical working group, rates for form work shall be dded on percentage basis to the fininshed concrete item rates Foundation, Plinth Beams of Buildings As 50%. PWD Common DSR 2023-24 Volume 1 (P No: 111 I.No:2 )

008 - Providing Honne wood wrought and putup for purlins, common raftersand similar work including cost of materials, labour, usage charges completeas per specifications.PWD Common DSR 2023-24 Volume 1 (P No: 99 I.No:12.2 )

009 - Providing and fixing in position Honnewood fully panelled shutters fo rwindows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick including cost of materials, labourcharges, usage charges complete as per specifications. (excluding cost of fixtures) PWD Common DSR 2023-24 Volume 1 (P No: 101 I.No:12.23 )

010 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.PWD Common DSR 2023-24 Volume 1 (P No: 16 I.No:2.5.1 )

011 - FormWork: As Per Recomadation of technical working group, rates for form work shall be dded on percentage basis to the fininshed concrete item rates RCC Columns / Shaft (Slip Centering) As 70%. PWD Common DSR 2023-24 Volume 1 (P No: 111 I.No:9 )

012 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD Common DSR 2023-24 Volume 1 (P No: 16 I.No:2.5.1 )

013 - FormWork: As Per Recomadation of technical working group, rates for form work shall be dded on percentage basis to the fininshed concrete item rates RCC Roof Slabs As 50%. PWD Common DSR 2023-24 Volume 1 (P No: 112 I.No:15 )

014 - Providing Brick work with common burnt clay machine mouldedperforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials,labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.PWD Common DSR 2023-24 Volume 2 (P No: 13 I.No:6.5 )

015 - Providing Brick work 7 cm thick with common burnt clay Non Modular brick of class designation 3.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.PWD Common DSR 2023-24 Volume 2 (P No: 14 I.No:6.11 )

016 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings PWD Common DSR 2023-24 Volume 1 (P No: 18 I.No:2.11 a )

017 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD Common DSR 2023-24 Volume 2 (P No: 41 I.No:8.2.1 )

018 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..PWD Common DSR 2023-24 Volume 2 (P No: 42 I.No:8.8 )

019 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications .PWD Common DSR 2023-24 Volume 2 (P No: 65 I.No:9.39 )

020 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour,usage charges of machinery complete as per specifications.PWD Common DSR 2023-24 Volume 2 (P No: 88 I.No:11.35.2.2 )

021 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.PWD Common DSR 2023-24 Volume 2 (P No: 86 I.No:11.34B )

022 - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinge .-do- with both side prelam PWD Common DSR 2023-24 Volume 2 (P No: 44 I.No:12.55.1 )