Directorate Of Municipal Administration Tender

PWD 04 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) (P 16/ I.2.5.2) PWD SR 2023-24 Volume-1

PWD 05 - Supplying, fitting and placing TMT FE 550/ 550D Steel Reinforcement complete as per drawing and technical specification ( P 18 /I.2.11) PWD SR 2023-24 Volume-1

PWD 06 - Fabrication, Supplying, Erection, Testing and Commissioning of...... ms long Polygon high mast with Single/ Multiple telescopicsections having, (minimum overlap distance of 1.5 times of topsection) thickness as per BSEN 10025 grades 355 JO/ASTMA572-50 steel sheet plate for shaft suitable towithstand a windvelocity of 47 m/s as per IS 875 part 3(as per GA Drawing).Base plate as per IS 2062/ASTM A572-50. The mast shall beGalvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123with an average 70 microns as per IS 2629, and welded as perBS 5135 Single L-Seam jointThemast shall have 2 Way headframe with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separateguides for 2 runs of 5 mm dia, stainless steel wire rope of AISI304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2EPR insulated PCP sheathed trailing power cable housed insidethe bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversiblegeared motor operating on 230/415V, 50Hz, shall be provideabove 15 Mtr mast) The mast shall have lantern of 2 segments,suitable dia with max load carrying capacity as per IS 1239. Themast shall be erected on existing RCC footing. The mast shall besupplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the headframe cover and GLS type aviation twin l A fitting with wiringcomplete. (excluding foundation) as per technical data.16 m - Top 150 mm and Bottom 410 mm dia ( P13 /I..4.5.2) Electrical SR 2023-24

PWD 07 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit reaking capacity of 10K and complete wiring as required confirming to IEC 60898 (P17/Ino:5.18.9) Common SR 2023-24 (Electrical) 50-63 A TPN

PWD 08 - Supply of LED floodlight luminaries with pressure die castaluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66optical and electrical compartment & impactresistance ofcomplete luminaire IK08. Power Factor 0.9 with mains, Surge Protection-Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherences with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location withminimized minimal tools. LED Light fixture with W SystemPower consumption. LED Efficiency 1301m/w, nominal CRI75. Luminaire manufacturer should have in- house facilityaccredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark /name shall beEngraved / Embossing on the die cast housing / Body partWarranty of 2 Years against any manufacturing defect workingunder standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ LED Floodlight 240W (P 46 /I.11.9.7) Electrical SR 2023-24

PWD 09 - Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5mm ( P 5 /I.2.3.3) Electrical SR 2023-24

PWD 10 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 100 to 125Amps ( P 16 /I.5.14.7) Electrical SR 2023-24

PWD 11 - Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site. Normal soil 5/6'' Bore. ( P 56 /I. 28.01) Electrical SR 2023-24

PWD 12 - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia (P 157 / I . 13.39) WS&S SR 2023-24

PWD 13 - Supplying and fixing Microprocessor Based Electronic timer (without contactor, Din mounting using necessary bolts, nuts and washers etc., 3-120 sec setting ( P 21 /I.5.47) Electrical SR 2023-24

PWD 14 - Fabricating supplying and mounting MS Box made out 14SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with dissipation provided with hinged front cover equipped with tamper proof locking arrangements with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tank treatment with powder coated paint and finally finished with approved colour etc,complete (P20/Ino: 5.42.1) Common SR 2021-22 (Electrical)

PWD 15 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers (P14/Ino: 5.7.4)

PWD 16 - Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc, and fixing on existing wood or metal box using NF screws (P9/Ino:3.9) Common SR 2021-22 (Electrical)

PWD 17 - Supplying and Fixing 40x40x6 mm angle iron frame work fabricated out of M.S.Angle iron and M.S.Flat with bolts,washers, etc.,and painted with 2 coats of red oxide and then two coats of approved paint.-75x75x6mm (Common SR 2021-22 (Electrical) P20/Ino:5.41.1)