Directorate Of Municipal Administration Tender

EE004 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The M20 Design Mix Using 20 mm nominal size graded granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) VOL-1 I.NO-2.3.1 P.NO-16

EE006 - Direction and Place Identification Signs upto 0.9 m2 Size Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing Board VOL-3 I.NO-8.7 P.NO-65

EE007 - Decorative Median Light poles: fabricating , supplying and erection of 10 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for ..... Mtrs pole in double/single section and single joint welded as per IS 9595/IS 10178AWS having two nos of 12-13 mtr length pole with dimensions bottom 190mm, top 60 mm with 3mm thick, the pole should be painted Ashtetically using good quality DuPont paint the centre pole having dimension of 140mm dia 2.8 mtr length 2.4mm thick with perforation for the length of 1000mm inserted with colour changing LED tube inside. Should be painted with good quality Dupont paint and Stainless steel ball should be placed on top. Suitable base plate and 6 Nos of m-24 long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65 micron as per ASTM-A123 and 153 etc... The pole height may be varied at bridge section The pole should be as shown in attached picture.Approved rates )

EE008 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr AT Lumen Maintenance of 70percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than130lm/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001-2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Streetlight 90 Watts VOL-6 Part I - Electrical Items I. NO 11.8.4 P.NO-46

EE009 - Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. VOL-2 I.NO-19.2.1 P.NO-187

EE010 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications VOL-1 I.NO-1.10 P.NO-07

EE011 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE- Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0, 63mm dia pwd electrical sr 2014-15 Item no page no-7.2 page 63

EE012 - XLPE 1.1 kV, or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) VOL-6 Part-III - 11 kV Materails I.NO-32.05 P.NO 13

EE013 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staf LT Cable 2.5 to 25 Sqmm VOL-6 Part-IV - 11 kV Labour I.NO-21.05 P.NO 52

EE014 - Class HR 1.1 kV (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694- 2010 PVC Wire - 10 Sqmm Weight per 100 Mtr Coil- 5.3 Kg VOL-6 Part-III - 11 kV Materails I.NO-48.04 P.NO 16

EE015 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694-1990 3core 2.5sq mm VOL-6 Part I - Electrical Items I. NO 2.5.8 P.NO-06

EE016 - Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand c Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898.6-32Amps SP VOL-6 Part I - Electrical Items I. NO-5.18.1 P.NO-17

EE017 - Pipe GroundingGI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with olt,nut,GIStripsandwashercomplete Minimum Weight of GI Pipe: 7.3 KgGood Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 KgeachGood Quality Salt for grounding purposes packed in 50Kg gunny bag VOL-6 I. NO-51.01,02,03 P.NO-22