Directorate Of Municipal Administration Tender

004 - 24 43 65 72 150 Watts LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation Diffuser with injection molded is made of polycarbonate material with high transmission index delivering superior light output Rated life Burning Hrs 50000 hr Lumen maintenance of 70 CCT 5500K , IP 66 optical and electrical compartment & impact resistance of complete luminare IK08, power factor 0.9 with mains current should not be greater than 0.1A to 0.7A & Surge protection -Min 4 KV along with over voltage\overload ,short circuit\miss- wiring protection. Compatable for pole mounting with outer dia of 40mm to 50mm .Universal voltage driver to operate wide voltage range from 100V to 270V 50 60Hz application. Over load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322 IEC 60598 LM 79 LM 80 Adherence wire RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Efficiency 130lm w at 1W Fixture Efficiency 80lm w with nominal CRI 75 complete as per IS 1944 Part I & Part II

005 - Operation and Maintenance of light sources mentioned below as 1a to d and 2 and cost of men and material as directed by the Engineer in-charge. Here the work includes supply and replacement of all components materials such as lamps, chokes ballasts, starters, condensers, ignitors, side holders, wire etc., complete for the street lighting as per the specifications mentioned below including painting of poles and footings, pole numbering and preparing of master register for each ward/division, removing of buntings, posters, threads, banners from the street lighting poles. Direct, tapping, Bimetal and all other nature of faults etc., to be attended by the contractor at his cost only Maintenance of 24 to 85 w C.F.L fittings

006 - Operation and maintanance of day intergral induction luminary fittings die cast aluminum base with suitable prewired electronic control gear to operate 230v 50 Hz ac supply and suitable wattage induction lamp the fitting should be fitted with body of fitting shall be finished with black gray powder coated paint with enclosure IP54 specifications complete 80 Watts

007 - Supply erection and maintenance of street lighting control circuit in a metal box housing with 100 A MCB unit replacement of existing porcelain cut outs and loose defective wire etc. Switch On off