Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 8,50,000Document Cost
Refer DocumentsTender Fee
₹ 5,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/BD/WORK_INDENT16862Tender No
DMA/2024-25/BD/WORK_INDENT16862Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
It.No 3.7, Vol-3, SR 203-24 - Compacting Original Ground - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. (PWD SR . 2023-24 Vol 3 Sl no 3.7 Pg no 17)
4455.127
110
491177.75175
It.No 1.14.1 , Vol-1, SR 203-24 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m (PWD SR . 2023-24 Vol 1 SL NO 1.14.1 Pg no 08)
833.862
107
89306.6202
It.No 1.15.1, Vol-1, SR 203-24 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth (PWD SR . 2023-24 Vol 1 SL NO 1.15.1 Pg no 08)
999.25
381
380864.1375
It.No 2.1.4, Vol-3, SR 203-24 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Specification No. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol 1 Item no 2.1.4 Pg no 15)
156.0619
6527
1018748.673915
It.No 2.1.6, Vol-3, SR 203-24 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Specification No. Mix 1:2:4 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol 1 Item no 2.1.6 Pg no 15)
34.396
6555
225470.9394
It.No 2.4.3, Vol-1, SR 203-24 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol 1 Sl no 2.4.3 Pg no 16) .
62.235
7185
447159.7197
It.No 2.4.3, Vol-3, SR 203-24 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol 1 Sl no 2.4.3 Pg no 16) .
33.8835
11309
383214.25296
It.No 1.14.1 , Vol-3, SR 203-24 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol 1 Sl no 2.4.3 Pg no 16) .
469.65
7318
3436936.272
It.No 1.14.1 , Vol-3, SR 203-24 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR 2023-24 Vol 2 Sl no 5.4 Pg no 09).
54.1679
6708
363382.648755
It.No 6.32, Vol-2, SR 203-24 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.. (PWD SR 2023-24 Vol 2 Sl no 6.32 Pg no 17).
285.039
1375
392071.1445
It.No 2.4.3, Vol-3, SR 203-24 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol 1 Sl no 2.4.3 Pg no 16) .
73.9485
9979
737946.8712
It.No 2.4.2, Vol-1, SR 203-24 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol 1 Sl no 2.4.2 Pg no 16) .
90.805
8962
813871.59425
It.No 17.14, Vol-1, SR 203-24 - Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. (PWD SR 2023-24 Vol 2 Sl no 17.14 Pg no 177) .
52
1228
63882
It.No 1.9, Vol-1, SR 203-24 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m (PWD SR . 2023-24 Vol 1 Sl no 1.9 Pg no 7)
1466.49
279
409590.657
It.No 1.8, Vol-1, SR 203-24 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. (PWD SR . 2023-24 Vol 1 Sl no 1.8 Pg no 7)
3199.77
497
1592525.529
It.No 8.1.2, Vol-2, SR 203-24 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (PWD SR 2023-24 Vol 2 Sl no 8.1.2 Pg no 41) .
921.12
253
233089.416
It.No 2.5.2, Vol-1, SR 203-24 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol 1 Sl no 2.5.2 Pg no 16).
20.745
12214
253394.98875
It.No 4.1 A (iii), Vol-3, SR 203-24 - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 - Plant Mix Method For grading III Material (PWD SR 2023-24 Vol 3 Item no 4.1 (A) (iii) Pg no 23)
813.9255
2636
2145955.277025
It.No 4.17, Vol-3, SR 203-24 - 406 A Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (PWD SR . 2023-24 Vol 3 Sl no 4.17 Pg no 26)
672.415
2686
1806745.48425
It.No 16.28, Vol-3, SR 203-24 - PQC Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. PWD Common DSR 2023-24 Volume 3 (P No: 149 I.No:.16.28 )
896.55
7091
6358063.635
It.No 12.4, Vol-3, SR 203-24 - Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.. (PWD Common SR 2023-24 Volume 3 Page No. 117 Item No 12.4)
250.2
2810
703274.67
It.No 3.43, Vol-4, SR 203-24 - Providing and constructing 300 mm thick rubble stone pitching set in CM 1: 5 proportion by volume with pin headers at 2 per m2 including cost of all materials from approved source, labour, packing stone chips and mortar into joints, finishing, curing and all other ancillary operations complete. (PWD Common SR 2023-24 Volume 4 Page No. 54 Item No 3.43)
450
1000
450292.5
It.No 1.1, Vol-4, SR 203-24 - Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour & all necessary works as directed and complete as per specification. (PWD Common SR 2023-24 Volume 4 Page No. 129 Item No 1.1)
97.5
353
34500.375
It.No 6.8.2, Vol-3, SR 203-24 - Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS15658 for Commercial Traffic Axle load repetitions upto 10MSA& for Residential Streets of approved shape and colour, laid inrequired pattern and including over 40mm thick compacted bedof coarse sand, filling the joints with fine sand etc. all complete asper the direction of Engineer-in-charge. (WMM/WBM Base to bepaid separately as per relevant technical specification) (PWD Common SR 2023-24 Volume 3 Page No. 51 Item No 6.8.2)
678.4
1219
827003.52
It.No 16.9, Vol-5, SR 203-24 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. (PWD SR . 2023-24 Vol 5 Pg no 191 Sl no 16.9 )
16
5726
91627.2
It.No 8.32, Vol-2, SR 203-24 - Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Common SR Vol II 2023-24, Pg.No.46 It.No.8.32)
921.12
163
150879.456
It.No 2.11 a, Vol-1, SR 203-24 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - a) Buildings (PWD SR 2023-24 Vol 1 Pg no 18 Sl no 2.11.a)
22.8974
93929
2150749.34739
It.No 2.11 h, Vol-1, SR 203-24 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - h) All other type of structures (PWD SR 2023-24 Vol 1 Pg no 18 Sl no 2.11.h)
43.0084
82961
3568043.52702
It.No 7.6, Vol-2, SR 203-24 - Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S.sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/m²) (PWD SR Circle 2023-24, Vol 2, Sl no 7.6, Pg no 21)
164
677
111069
It.No 16.1.6, Vol-5, SR 203-24 - Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing. 300 mm dia. pipes (PWD SR 2023-24 Vol 5 Pg no 187 Sl No.16.1.6) .
120
1147
137718
It.No 10.1.9, Vol-5, SR 203-24 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 160mm dia., 6 kg/sqcm & class 3 (PWD SR 2023-24 Vol 5 Pg no 113 Sl No.10.1.9) .
160
648
103824
It.No 13.34, Vol-2, SR 203-24 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 : 1996 marked with cover and suitable locking arrangements, making necessary holes of inlet, outlet and over flow pipes,but without fittings and the base support for tank. (SR. 2023-24, Vol 2, P.No.123, Item No.13.34)
15000
9
141750
It.No 13.33.5, Vol-2, SR 203-24 - Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement and tesing of joints complete as per direction of Engineer in charge . External Work, 40 mm nominal dia pipes. (SR. 2023-24, Vol 2, P.No.122, Item No.13.33.5)
150
500
75127.5
It.No 13.33.3, Vol-2, SR 203-24 - Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement and tesing of joints complete as per direction of Engineer in charge . External Work, 25 mm nominal dia pipes. (SR. 2023-24, Vol 2, P.No.122, Item No.13.33.3)
30
310
9324
It.No 13.32.2, Vol-2, SR 203-24 - Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, imcluding fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including tesing of joints complete as per direction of Engineer in charge. Concealed Work, including cutting chases and making good the wall etc. 20 mm nominal dia pipes. (SR. 2023-24, Vol 2, P.No.122, Item No.13.32.2)
15
397
5969.25
It.No 13.4.3, Vol-2, SR 203-24 - 13.2 Providing and fixing brass bib cock of approved quality :13.2.2 20 mm nominal bore (SR. 2023-24, Vol 2, Pg no 117, I no.13.2.2)
2
320
640.5
It.No 13.4.1, Vol-2, SR 203-24 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore (SR. 2023-24, Vol 2, Pg no 117, I no.13.4.3)
2
737
1474.2
It.No 13.4.1, Vol-2, SR 203-24 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore (SR. 2023-24, Vol 2, Pg no 117, I no.13.4.1)
30
576
17293.5
M R - Providing, supplying to work site, Submersible Sewerage Pump Set of 75mm dia suitable for sewege , 3 Phase, SS Bowl & Impeller with Low volt Motor as per specifications, as per necessary ammendments and instructions of engineer incharge of work. - CAST Iron Body 5.00 HP (Market Rate)
1
160000
160000
It.No 2.5.13, Vol-6, SR 203-24 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 - 10C x 2.5 mm2 (SR. 2023-24, Vol 6, Part - 3, PWD, Pg no 06, I no.2.5.13)
60
429
25740
It.No 5.2.1, Vol-6, SR 203-24 - Supplying fully automatic star delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 V3 phase and wired after fixing to the existing wooden board for motor. upto 12.5 HP (SR. 2023-24, Vol 6, Part - 3, PWD, Pg no 14, I no.5.2.1)
1
7455
7455
It.No 16.17, Vol-3, SR 203-24 - Laying Cement Concrete Pipe NP3 (burried conduits) of 500mm dia on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets (SR. 2023-24, Vol 3, Pg no 147, I no.16.17)
15
2721
40824
It.No 8.29 i, Vol-3, SR 203-24 - Cable Duct Across the Road - Providing and laying of a reinforced cement concrete pipeduct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:98-1997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and (i) Single row for one utility service (SR. 2023-24, Vol 3, Pg no 71, I no.8.29 (i) )
30
2322
69678
It.No 11.2 , Vol-2, SR 203-24 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
192378.979
118
22825765.85835
It.No 8.4, Vol-2, SR 203-24 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Volume 2 Page No 48 Item No 8.40)
3986.6937
120
481393.264275
It.No 7.38, Vol-2, SR 203-24 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Vol. 2, P.No. 26, I.No. 7.38)
4058
596
2420191.2
It.No 7.34, Vol-2, SR 203-24 - Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charges of machinery for cutting, welding, grinding and erection equipments, with all lead, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the Engineer in charge of the work.(Vol. 2, P.No. 25, I.No. 7.34)
60
3281
196875
It.No 7.69.3, Vol-2, SR 203-24 - Providing and fixing Aluminium Turbo ventilator complete as per technical specifications - Non Power Driven with 1.3mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total weight not less than 6kg for Industrial use for area upto 100m2 for Industrial use (Vol. 2, P.No. 38, I.No. 7.69.3)
24
5880
141120
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements