Directorate Of Municipal Administration Tender

P.No. 13, I.No. 4.5.2 of PWD & CSR VOL-6 SR 2023- - Fabrication, Supplying, Erection, Testing and Commissioning of . ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot- dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as perTR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data 16 m - Top 150 mm and Bottom 410 mm dia

P.No. 21, I.No. 5.44.1 of PWD & CSR VOL-6 SR 2023- - Supply and Installation / Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300mmx300mmx214mm P.No. 21, I.No. 5.44.1 of PWD & CSR VOL-6 SR 2023-24

P.No. 40, I.No. 14.3 of PWD & CSR VOL-6 SR 2023- - Supplying of1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules : 4C x 70 Sq mm

P.No. 63, I.No. 29.02 of PWD & CSR VOL-6 SR 2023- - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed

P.No. 63, I.No. 29.07 of PWD & CSR VOL-6 SR 2023- - Refilling the cable trenches with selected available earth from trench excavation including watering,consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr

P.No. 20, I.No. 5.41.1 of PWD & CSR VOL-6 SR 2023 - Supplying and fixing angle iron frame work babricated out of M.S. Angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6mm

P.No. 17, I.No. 5.18.4 of PWD & CSR VOL-6 SR 2023 - Supplying and fixing Miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps DP

P.No. 14, I.No. 5.7.3 of PWD & CSR VOL-6 SR 2023- - Supplying and fixing of Porcelain fuse channel with cutout on existing wooden/panel using ncessary nuts, bolts and washers. 63Amps

P.No. 54, I.No. 12.56 of PWD & CSR VOL-6 SR 2023- - Supplying, fixing wiring earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI 2.5 mtr. long buried in a pit… the pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 12 mm dia.

P.No. 6, I.No. 2.5.2 of PWD & CSR VOL-6 SR 2023-2 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100volts as per IS-694:1990. 3C X 1.5 Sq.mm

P.No. 16, I.No. 5.14.3 of PWD & CSR VOL-6 SR 2023 - Supply and Fixing of 4pole power contactor with NO/NC contacts on existing wood/Panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 Amps

P.No. 21, I.No. 5.48 of PWD & CSR VOL-6 SR 2023-2 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

P.No. 19, I.No. 5.35 of PWD & CSR VOL-6 SR 2023-2 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole curent class-1 Accuracy Energy Meter.

P.No. 46, I.No. 11.9.7 of PWD & CSR VOL-6 SR 2023- - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output Rated life Burning Hrs 50000

P.No. 50, I.No. 30.10 of PWD & CSR VOL-6 SR 2023- - UNDERGROUND FIBRE OPTIC UNARMOURED CABLE (UG - OFC) & ACCESSORIES Polyvinyl Lubricated Bond (PLB/HDPE) pipe OD 40 mm (P.No. 50, I.No. 30.10 of PWD & CSR VOL-6 SR 2023-24)