Directorate Of Municipal Administration Tender

1.8 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or priorexcavation with all lifts and lead, transportation to site, spreading,grading to required slope and compacting to meet the requirementcomplete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. (PWD SR 2023-24, V-1, Page no-34, Item no 1.8)

8.42.8 - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 200 x 150 mm size (PWD SR 2023-224, V-3, P.No-74, SI No. 8.42.8)

9.4 - Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge. (PWD SR 2023-24, V-2, Page no-59, Item no 9.4)

1.1a - Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Tipper 5.5 m3) (PWD SR 2023-24, V-3, Page no-5, Item no-1.1a)

8.44 - Floor painting with floor enamel paint of approved brand and manu facture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

A-19 sl no 238 - Coarse sand

010 - Providing, Supplying, fixing, installation, commissioning and trial run of Arch swing two seaters-LK-SW-51,All Round and rectangular pipes are GI Or CR,ISI ,make Guage 14 guage, 2coating are red oxide and final paints of industrial paint, Nut bolt GI Bearing heavy,(Branded.) FRP thickness 4-5mm,Swing assembly 6mm chain with rubber coating Length-10Ft,Width-5Ft, Hiegth-9 Ft, The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fixing the eqiupment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc., required to complete the work. As per the direction of Engineer-in-charge

011 - Providing, Supplying, fixing, installation, commissioning and trial run of Single Slide,Supply & Fixing of 150 CM Slide: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. “A” shaped support posts of height 2.28 m, are to be schedule Galvanized steel with a 60mm OD Outer Diameter. Deck of size 0.80 m x 0.60 m and Staircase of size 1.84 m x 0.60 m shall be an all-ROBOTIC welded assembly fabricated from perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of height 1.9 m and Dia 32 mm shall be an all-patent welded unit, fabricated from 32 O.D. galvanized steel pipes. Wavey Slide of size 2.95 m x 0.72 m x 1.72 m. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 4.18 m x 0.89 m x 2.28 m The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fixing the eqiupment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc., required to complete the work. As per the direction of Engineer-in-charge

5.3 - Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR 2023-24 , V -2, Page no 9, Item no 5.3)

2.1.4 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately).Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 , V -1, Page no 15, Item no 2.1.4)

8.3.2 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 , V -2, Page no 41, Item no 8.3.2)

11.34A - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (PWD SR 2023-24 , V -2, Page no 86, Item no 11.34A)

8.28 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 , V -2, Page no 45, Item no 8.28)

8.4 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 , V -2, Page no 48, Item no 8.4)

8.33.3 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 , V -2, Page no 47, Item no 8.33.3)

11.58 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia 4 mm) (PWD SR 2023-24 , V -2, Page no 95, Item no 11.58)

SR 2022-23 I.No: 12.1 Page No. 48. - General Cleaning

SR 2022-23 I.No: 1.2(a) Page No. 1 - Red Earth- Red Earth: Procurment of Fine coarse Red-earth/soil, FOREST / HORTICULTURE /WATERSHED DEPARTMENT Common Sanctioned SR 2022-23 I.No: 1.2(a) Page No. 1.

SR 2022-23 I.No: J Dibbling Page No.50 - St.Augustian Lawn (Dibling)- Lawn : St.Augustian Grass Dibbling cost, FOREST/HORTICULTURE/WATERSHED DEPARTMENT Common Sanctioned SR 2022-23 I.No: J Dibbling Page No.50

SR 2022-23 I.No: 12.9(a) Page No.49. - Planting of Hedges- Growing of Hedges: Digging trench of size 1mx0.30mx0.45m and filling 50% of the trench with top soil and remaining 50% trench with1:2:3 proportion of sand (0.0112), FYM (0.0224cum) red earth (0.0336cum) and planting of well grown plants (excluding cost of plants) FOREST/ HORTICULTURE /WATERSHED DEPARTMENT Common Sanctioned SR 2022-23 I.No: 12.9(a) Page No.49.

Approved Rate 2015-16 - Cost of Hedges Plants -Cost of Hedges Plants : 1) Durantha Plant, 2) Irantimum Plant, 3) Akelifa timma plant,4) Akelifa Godreg, Etc.,

SR 2022-23 I.No: 12.2(a) Page No. 48. - Planting of Trees - Planting of Trees: Digging pits of size 0.75 x 0.75x 0.75m, filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand (0.035cum) FYM (0.070cum) Red earth (0.105 cum) and planting of well grown tree saplings (excluding cost of plants) FOREST/ HORTICULTURE/ WATERSHED DEPARTMENT Common Sanctioned SR 2022-23 I.No: 12.2(a) Page No. 48.

Approved Rate 2015-16 - Cost of Tree Plants - Cost of Tree Plants: Areca Palm, 2) Royal Palm, 3) Faicus Beneginam, 4) Faicus Starlight Etc.,

SR 2022-23 item no 12.3 a - Planting of Shrubs - Planting of Shrubs : Digging pits of size 0.45 x 0.45 x0.45m filling 50% of the pit with top soil and remaining 50% of pit with1:2:3 proportion of sand (0.007), FYM (0.014cm) red earth (0.021cm) and and planting of well grown tree saplings (excluding cost of plants) FOREST/ HORTICULTURE/ WATERSHED DEPARTMENT Common Sanctioned SR 2022-23 I.No: 12.3(a) Page No. 48.

Approved Rate 2015-16 - Cost of Shrubs Plants - Cost of Shrub Plants: 1) Ixora plants ,2) Hybiscuous plants 3) Iporbiya plants, 4) Jathropa plants, 5)Sang of India plants, 6)Dust miller plants, Etc.,