Directorate Of Municipal Administration Tender

KSRRB M2200-6: Providing TMT bars Fe500 steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire, anchoring to the adjoining members wherever necessary, complete as per design (laps, hooks and wastage shall not be measured and paid) cost of all materials, labor, HOM of machineries complete as per specifications. page229/28.8.2 2018-19 PW,P &IWTD,Shivamogga circle

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-2016, with Superplastizer at 3 Its conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints,including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries,all lead & lift charges etc., complete as per specifications. with OPC at 320 kg/cum and fly ash 40kg/cum conforming to IS:3812 coarse aggregate 0.69cum, fine aggregate 0.46cum.page 176/22.6.3 2018-19 PW,P &IWTD, Shivamogga circle

KSRRB 200-13.1Dismantling of existing structures like culverts bridges retaining walls and other structure comprising of masonry cement concrete wood work steel work including T & P and scaffolding wherever necessary sorting the dismantled materials disposal of unservicable material and stacking the serviceable material all the complete as per specifications page 130/18.20 2018-19 PW,P &IWTD, Shivamogga circle by mechanical means A cement concrete grade M15-M20

KSRRB 300-1 Earthwork excavation by manual means for roads drains & similar works in ordinary soil excavated surface levelled and sides neatly dressed the disposed earth to be levelled neatly after breaking of clods complete as per specifications page 143/19.1 2018-19 PW,P &IWTD, Shivamogga circle

KSRRB M100-1Loading and unloading of stone boulder/stone aggregates/sand/kankar/moorum KSRRB M100-1:Placing tipper at loading point loading with front end loader dumping turning for return trip excluding time for haulage and return trip complete as per specificationsPage no 136/item 17.1 2018-19 PW,P &IWTD,Shivamogga circle

KSRRB 300-3 Earthwork excavation and forming in embankments by manual means in all types of soils (when earth is taken from bank cutting of from soil deposits)including breaking of clods.spreading to required line and level forming and cost of all labour complete as per specifications (excluding watering and compaction of earth )(with all lead and lift) Page no 143/item 19.3 2018-19 PW,P &IWTD,Shivamogga circle

Fabricating providing and erecting in position of MS ornamental security grill gate without hot dip using 75X 12mm M.S flat for alround frame work with verticals at the center and horizontal centere support MS square of 20x20mm of different heights as shown in the drawing are to be fixed at 16cms C/C for square bars of full height and at 8cms C/C for bottom rods providing ornamental CI designers at the bottom and C I arrows in the midle and top.The entire frame work is to be fixed by means of expansion bolts to the brick pillars with necesary drilling holes the work includes providing two coats of enamel painting over one coat of red lead ready mix primer coat etc complete cost of all labour painting erection charges using hoist pulleycranes with all lead and lift loading transporting and unloading using hoist pulley cranes scaffolding charges and all other incidental charges required for successful completion of the work as per specification and drawing page 43/7.31 2018-19 PW,P &IWTD,Shivamogga circle

KSRB. 4-1.5 : Providing and laying in position plain cement concrete of mix M20 with OPC cement @300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69 cum and fine aggrgatets @0.43 cum machine mixed , concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, cills including cost of all materials, labour, HOM of machinary, curing complete as per specifications. Page no 13/item 4.5 2018-19 PW,P &IWTD, Shivamogga circle

Supply & Fixing of HD Sit Up Station. Metal: All tubular steel of 2.5MM thickness are glavanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles, Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party. All products must clearly deplay the GS Mark as has been issued in the EN 16630 safety certificates. Size_LxWxH: 1412 x 1366 x 650 mm. Weight: 42.6 KG Safety Area: 4462 x 4078 mm, Capacity 2 Persons. Inclusive of all Taxes and Freight charges.

Supply and fixing of Seated Chest Press. Metal: All tubular steel of 2.5MM thickness are glavanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zine Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party. All Products must clearly deplay the GS Mark as has been issued in the EN 16630 safety certificates. Size L x W x H: 1955 x 733 x 2058mm, Weight: 86.6 KG, Safety Area: 5545 x 4470mm, Capacity 2 Persons. Inclusive of all Taxes and Freight charges.

Supply & Fixing of HD Squat Pushing. Metal: All tubular steel of 2.5MM thickness are glavanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off' removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN Each 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party. All products must clearly deplay the GS Mark as has been issued in the EN 16630 safety certificates. Size_LxWxH: 2270 x 635 x 1640 mm. Weight: 60.2 KG Safety Area: 5300 x 3685mm, Capacity 2 Persons. Inclusive of all Taxes and Freight charges.

Supply & Fixing of HD Waist Twister Metal: All tabutur steet of 2.5MM thickness are glavanized and Izine dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN Each 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3d Party. All products must clearly deplay the GS Mark as has been issued in the EN 16630 safety certificates. Size_LxWxII: 1460 x 1310 x 1150 mm. Weight: 39.1 KG Safety Area: 4360 x 4510 mm, Capacity 3 Persons. Inclusive of all Taxes and Freight charges.

Supply & Fixing of HD double Health Waljer, Metal All art of 25NM kost glavanized and zine dipped. Joints are Robotic welded. All welded jomis ses scalloped a nenary and welded to an apprvoed MIG Process. All welds are dressed off removing all shap op sd ums Zinc Primer paint is applied at all the welding points prior to dinishing All matsi parts are powder coated uning AKZ obel Great Wall powder to the thickness of 80-120 micres All metal parts are tested in our salt spray masjine that uses a 5% NaC1 slation de to 1507227 speed up cocosion te 3000 His Rubber Delivery: I complinely pre-anned equipment de Muntance Mainin ding te tad 16630 and the mainance guide Safety All products must be toned ins antified to me EN16630 safety standards with GS mark The EN 16630 cases must be used by a peduled international centifying agency such as IPEMA, TUV, CPSC o 505 only. The CS Mack N1630 Cetificates must be le the mains of smdering party and not ay Party, All products in clearly deploy the GS Mark as has bem med in the EN 15630 safety certificates Sim LxWxH 2015 x 615 1360 mm Weight: 93 KG Safety Arex 5015 x 3015 Capacity 2 Person Ichive of all Taxes and Fight charges.

Duck merry go round: all round and rectangular pipes are GI or CR ISI mark 14 gauge 2 coating are red oxide and final paints of industrial paint.Nut bolt GI bearing heavy branded.FRP thickness 4-5 MM.swing assembly 6mm chain with rubber coating. inclusive of all taxes and freight charges.