Directorate Of Municipal Administration Tender

Operation and Maintenance’ of light sources mentioned below and cost of men and material ladder vehicle etc., as directed by the Engineer in-charge. Here the work includes supply and replacement of all components/materials such as lamps, chokes /ballasts, starters, condensers, ignitors, side holders,underground cable, wire etc., complete for the street lighting as per the specifications mentioned below, including painting of poles and footings, pole numbering and preparing of master register for each ward/division, removing of buntings, posters, threads, banners from the street lighting poles. Direct, tapping, Bimetal and all other nature of faults etc., to be attended by the contractor at his cost only. 4 feet, 36/40 W fluorescent lamp fixtures consisting of 4’ long, 36 W tube light as specified by IS 2418 (Part I, II, III and IV), starter as per IS 2215 – 1968 and ballasts as per IS 1534 (Part 1) – 1967. The ballasts shall be legibly marked for origin, type, wiring diagram, ISI certification. For more details of these parts, please refer respected clauses under Technical Bid Form D-4. ---- Etc., Complete with all lead and lift as per the instruction of Engineer in charge of work

HPSV Lamp fixture should be of single piece gravting die cat Im6 allo, isis marked stret light lumininous sutiable for watt ellipticla high presure sodium lamp and by gravit di e caist aluminum housing, high transparent acrylic bowl firmly held with the conopy by means of stainless steel toggles and rubber, gasket, optical control is provided by reflections the contrl gear housing accomodated low loss heavy optical control is provided by reflections, the control power low loss heavy duty 2 polyster filler copper wire wound ballast, power factor improvment capacitor and igniter (for HPSV lamp) all pre wired up to t he terminal block, the luminary is painted white isidien and hammer tone gray out side. the luminairs meet IP-65 protection and confirm to Is; 10322 (part5 / sec3) specificationbut without lamp for more details of therse parts, please refer respected clauses under technical bid form d-4. 250 W Sodium Vaper Lamp fixture for Street Light

Do- Metal Halide (MH) Lamp fixtures consist of metal halide lamp confirming to IS 9974 (part I and II), choke of heavy duty inductive polyester filled copper wound ballast suitable for MH lamps made from low loss silicon steel lamination and are wound with polyester based super enamelled copper wire with class F insulation on specially designed glass filled nylon bobbin and Ignitors suitable for MH lamps confirming to IS 9974. For more details of these parts, please refer respected clauses under Technical Bid Form D-4.