Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,69,000Document Cost
Refer DocumentsTender Fee
₹ 5,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/OW/WORK_INDENT34065Tender No
DMA/2024-25/OW/WORK_INDENT34065Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
har1.04 - Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM of machineries etc., complete In ordinary/soft rock without blasting upto 1.5 m depth. In all kinds of soils Depth upto 3 m ( CM SR 2023-24 P.No. 8/Vol-1/ 1.15.1 )
398.31
373
148924.1259
... More
har1.05 - Providing hearting embankment using selected approved impervious soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting to density control of not less than 95 percent using power roller etc., complete with all lead and all lifts. (WRD SR 2023-24/ P.no. 41/2.27)
518.4
521
270179.712
... More
har1.06 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails and boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. ( CM SR 2023-24 P.No. 10/Vol-1/ 1.17.1 ) All kinds of soils. Depth upto 1.50 m
45.9
269
12386.574
... More
har1.07 - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 ( CM SR 2023-24 P.No. 17/Vol-3/ 3.6 )
262.5
507
133294.875
... More
har1.08 - Providing laying and installation of 1500 micron thick wide HDPE
Geo membrane having thickness 1.5mm, Density 94g/cm3, Tensile strength at yield 23 Nmm/width and at break 2nmm width.Elongation at yield 13percentage Elongation at Break 70percentage , Tear strength resistance 175 N, Puncture Resistance 490N, Carbon blackcontent 2.5 and carbon blackdispersion at satisfactory level.
2166
659
1427394
... More
har1.09 - Providing and Laying Needle punched and mechanically bonded Non-woven Geotextile indigenously manufactured from high quality synthetic fibres on the prepared subgrade for separator cum filtration cum drainage application with necessary overlaps drawing. as per drawings
2166
108
233928
... More
har1.10 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Mix 1: 3: 6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ( CM SR 2023-24 P.No.15/Vol-1/2.1.3 )
142.13
6168
876753.0671
... More
har1.11 - Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1: 6 (1 cement : 6 coaSDe sand) (CM SR 2023-24/P.No.9/Vol-2/5.4)
122.324
6580
804973.87708
... More
har1.12 - Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1: 6 (1 cement : 6 coarse sand) including cost of all materials, labour,scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work.( CM SR 2023-24 P.No.13/Vol-2/6.4 )
11.01
8920
98218.3383
... More
har1.13 - Providing and laying 40mm size graded coarse aggregates /pebble stones for side as per drawing, specifications with all leads and lifts complete etc.,as directed by the Engineer.The rate includes cost of material, transportion, laying and compacting with all labour etc., (For drainage layers) : ( CM SR 2023-24 P.NO.A-38/Vol-1/Sl.No7)
2.242
1190
2667.98
... More
har1.14 - Providing and laying 100mm size graded coarse aggregates /pebble stones (For filter bed)as per drawing, specifications with all leads and lifts complete etc.,as directed by the Engineer.The rate includes cost of material, transportion, laying and compacting with all labour etc., (For drainage layers) : ( CM SR 2023-24 P.NO.A-38/Vol-1/Sl.No9)
1.805
1143
2063.115
... More
har1.15 - Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete.. (CM SR 2021-22/P.No.7/Vol-1/1.11) Filling.
2.776
2250
6247.5268
... More
har1.16 - Providing and laying 40mm size graded coarse aggregates /pebble stones for side as per drawing, specifications with all leads and lifts complete etc.,as directed by the Engineer.The rate includes cost of material, transportion, laying and compacting with all labour etc., (For drainage layers) : ( CM SR 2023-24 P.NO.A-38/Vol-1/Sl.No7)
0.746
1190
887.74
... More
har1.17 - Providing and Filling in foundation with granite / trap broken metal 40mm. and down size and with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. (derived from rate analysis) (CM SR 2023-24/P.No. A-38/Vol-1/SL No-7/ Pg.no 11/1.23)
115.2
1886
217377.792
... More
har1.18 - Providing and laying 25mm size graded coarse aggregates /pebble stones (For filter bed)as per drawing, specifications with all leads and lifts complete etc.,as directed by the Engineer.The rate includes cost of material, transportion, laying and compacting with all labour etc., (For drainage layers) : ( CM SR 2023-24 P.NO.A-38/Vol-1/Sl.No5)
0.746
1333
994.418
... More
har1.19 - Providing and Filling in foundation with granite / trap broken metal 20mm. and down size and with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. (derived from rate analysis) (CM SR 2023-24/P.No. A-38/Vol-1/SL No-4/Pg.no 11/1.23)
86.4
2069
178784.928
... More
har1.20 - Supplying and laying at site Factory made perforated hard HDPE subsoil drainage pipes pre-wrapped with 150 gsm Geotextile for subsoil drainage system ncludingall necessary coupling/ fittings for joints and back filling with aggregates. The pipe shall be manufactured from High Density Polyethylene HDPE). It shall be extruded into an open lattice wall structure, with greater than 60percentage of the circumference consisting of open area and a 30percentage solid area along the invert. The product should satisfy the following parameters as below 1. Ring Stiffness as per ISO 9969: 2016 should be greater than 0.8 kN/m2 2. Resistance to Acid with 3percentage HCl for 24 hrs without mass loss, change in colour, softening, cracking or spalling. 3. Resistance to Alkali with 3percentage KOH for 24 hrs without without mass loss, change in colour, softening, cracking or spalling.
(Excavated material to be utlised in roadway at site) 110mm dia HDPE pipe (CM SR 2023-24/P.No.19/Vol-3/3.14.1 )
168
1108
186191.04
... More
har1.21 - Supplying and laying at site Factory made perforated hard HDPE subsoil drainage pipes pre-wrapped with 150 gsm Geotextile for subsoil drainage system ncludingall necessary coupling/ fittings for joints and back filling with aggregates. The pipe shall be manufactured from High Density Polyethylene HDPE). It shall be extruded into an open lattice wall structure, with greater than 60percentage of the circumference consisting of open area and a 30percentage solid area along the invert. The product should satisfy the following parameters as below 1. Ring Stiffness as per ISO 9969: 2016 should be greater than 0.8 kN/m2 2. Resistance to Acid with 3percentage HCl for 24 hrs without mass loss, change in colour, softening, cracking or spalling. 3. Resistance to Alkali with 3percentage KOH for 24 hrs without without mass loss, change in colour, softening, cracking or spalling.(Excavated material to be utlised in roadway at site) 160mm dia HDPE pipe (CM SR 2023-24/P.No.19/Vol-3/3.14.2 )
168
1388
233257.92
... More
har1.22 - Supplying and laying at site Factory made perforated hard HDPE subsoil drainage pipes pre-wrapped with 150 gsm Geotextile for subsoil drainage system ncludingall necessary coupling/ fittings for joints and back filling with aggregates. The pipe shall be manufactured from High Density Polyethylene HDPE). It shall be extruded into an open lattice wall structure, with greater than 60percentage of the circumference consisting of open area and a 30percentage solid area along the invert. The product should satisfy the following parameters as below 1. Ring Stiffness as per ISO 9969: 2016 should be greater than 0.8 kN/m2 2. Resistance to Acid with 3percentage HCl for 24 hrs without mass loss, change in colour, softening, cracking or spalling. 3. Resistance to Alkali with 3percentage KOH for 24 hrs without without mass loss, change in colour, softening, cracking or spalling. (Excavated material to be utlised in roadway at site) 200mm dia HDPE pipe (CM SR 2023-24/P.No.19/Vol-3/3.14.3 )
79
1669
131900.77
... More
har1.23 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately))(CM SR 2023-24/P.No.16/Vol-1/2.4.2) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
40.924
7033
287847.1388
... More
har1.24 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately)) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/P.No.16/Vol-1/2.4.2)
43.076
7163
308594.74096
... More
har1.25 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/P.No.16/Vol-1/2.5.1)
9
7375
66376.89
... More
har1.26 - Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/P.No.16/Vol-1/2.3.1)
28.554
9769
278945.16816
... More
har1.27 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/P.No.16/Vol-1/2.5.1)
14.49
10926
158321.2176
... More
har1.28 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/P.No.16/Vol-1/2.5.1)
18.55
11609
215349.3615
... More
har1.29 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately)) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/P.No.16/Vol-1/2.4.2)
5.7375
11071
63523.132875
... More
har1.30 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/P.No.16/Vol-1/2.5.1)
5.56
10243
56953.026
... More
har1.31 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/P.No.16/Vol-1/2.5.1)
0.399
9901
3950.86209
... More
har1.32 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (CM SR 2023-24/P.No.7/Vol-1/1.9)
1067.9455
273
292595.70809
... More
har1.33 - Supplying PVC ringtite pipes conforming to IS 4985: 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm and class 3 ( CM SR 2023-24 P.NO.113/Vol-5/10.1.5)
20
226
4532
... More
har1.34 - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401(CM SR 2023-24/P.No.23/Vol-3/4.1(v))
280.2885
2561
717989.824485
... More
har1.35 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density(CM SR 2023-24/P.No.26/Vol-3/4.17)
273.84
2635
721779.2568
... More
har1.36 - Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/P.No.16/Vol-1/2.3.1)
189.462
9769
1850861.85648
... More
har1.37 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately)) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/P.No.16/Vol-1/2.4.2)
30.24
6838
206790.7968
... More
har1.38 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately)) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/P.No.16/Vol-1/2.4.2)
50.632
8792
445163.12616
... More
har1.39 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (CM SR 2023-24/P.No.18/Vol-1/2.11 H)All other type of structures
2.752
81381
223961.42016
... More
har1.40 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (CM SR 2023-24/P.No.18/Vol-1/2.11 a)
27.072
92140
2494433.30112
... More
har1.41 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc (CM-SR -2023-24 P.No.94, I.No.9.1.4) K010D HDPE Grade PE80-PN6.0,110mm dia
84
483
40577.88
... More
har1.42 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (CM SR 2023-24/P.No.82/Vol-2/11.16.1)
11040
140
1546483.2
... More
har1.43 - Providing and fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approvedsteel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. (CM SR 2023-24/P.No.21/Vol-2/7.1.1) 0.63 mm thick with zinc coating not less than 275 g/ sqm
527
905
477129.99
... More
har1.44 - Finishing walls with water proofing cement paint of required shade : New work (Two coats applied at 4.84 kg/10 sqm) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2023-24/P.No.45/Vol-2/8.28)
123.2
91
11293.744
... More
har1.45 - Supplying and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1: 2: 4 and C.M. 1: 3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete. ( CM SR 2023-24 P.No.196/Vol-5/ 16.23.2)Heavy Duty
1
2640
2640.92
... More
har1.46 - Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 mtrs. intervals and 0.5M heigh, including fixing in ground with CC 1: 2: 4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with: (CM SR 2023-24/P.No.85/Vol-5/7.1.1)
2
4508
9016.62
... More
har1.47 - Providing and fixing 1.2 m high GI barbed wire fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 m below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 817 (CM SR 2023-24/P.No.67/Vol-3/8.19)
24
341
8207.04
... More
har1.48 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1: 4 as per IS 2572: 2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ( CM SR 2023-24/ P.No.17/Vol-2/6.32)
78.06
1349
105326.358
... More
har1.49 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1: 4 as per IS 2572: 2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ( CM SR 2023-24/ P.No.17/Vol-2/6.33)
24
1267
30430.32
... More
har1.50 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1: 5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1: 6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24 V-2,/P.No.42, I-8.8)
82.74
382
31617.4362
... More
har1.51 - Providing 15 mm cement plaster with cement mortar 1: 3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (CM SR 2023-24/P.No.42/Vol-2/8.7)
138.09
376
52057.1682
... More
har1.52 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1: 4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2023-24/P.No.41/Vol-2/8.2.1)
14.364
303
4364.5014
... More
har1.53 - Providing 12 mm cement plaster with cement mortar 1: 6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/P.No.41/Vol-2/8.1.2)
24.33
248
6039.4359
... More
har1.54 - Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08percentage and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).(CM SR 2023-24/P.No.62/Vol-2/9.21.2) Size of Tile 600x600 mm.
24.33
1275
31024.1562
... More
har1.55 - Providing White washing with lime to give an even shade : New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin- charge. (CM SR 2023-24/P.No.44/Vol-2/8.21)
24.33
26
651.5574
... More
har1.56 - Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied at 1.43 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/P.No.46/Vol-2/8.31)
82.74
183
15169.5516
... More
har1.57 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 ltr/10 sqm over and including one coat of Special primer applied at 0.75 ltr /10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/P.No.46/Vol-2/8.33.1)
138.09
162
22472.7666
... More
har1.58 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2023-24/P.No.48/Vol-2/8.40)
6.66
118
788.877
... More
har1.59 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (CM SR 2023-24/P.No.86/Vol-2/11.34A)
175
173
30282
... More
har1.60 - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(CM SR 2023-24/P.No.100/Vol-2/12.13.1)
0.2677
101779
27246.358765
... More
har1.61 - Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) .(CM SR 2023-24/P.No.100/Vol-2/12.15)
3.675
7667
28177.401
... More
har1.62 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.(CM SR 2023-24/P.No.105/Vol-2/12.57.4) -do- 35 mm thick both side Teak
6.3
4667
29408.148
... More
har1.63 - Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (CM SR 2023-24/P.No.105/Vol-2/12.62)
10
244
2441.1
... More
har1.64 - Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. (CM SR 2023-24/P.No.105/Vol-2/12.61)
6
1019
6118.2
... More
har1.65 - Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (CM SR 2023-24/P.No.105/Vol-2/12.63)
10
133
1339
... More
har1.66 - Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (CM SR 2023-24/P.No.105/Vol-2/12.58)
3
123
370.8
... More
har1.67 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid(CM SR 2023-24/P.No.131/Vol-2/14.2.2)
3
4980
14940.15
... More
har1.68 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (CM SR 2023-24/P.No.132/Vol-2/14.7.2)White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
3
2637
7913.49
... More
har1.69 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia(CM SR 2023-24/P.No.136/Vol-2/14.28.1.1)
4
78
313.12
... More
har1.70 - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm ( CM SR 2023-24 P.No. 125/Vol-2/ 13.48 )
20
299
5994.6
... More
har1.71 - Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete. (CM-SR -2023-24 P.No.149, I.No.13.4) 0.50 HP/0.37kW - 5 STG(stage)
2
10475
20950.2
... More
har1.72 - Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per the direction of engineer incharge of work.external work. - 32mm nominal dia pipes ( PWD SR 2023-24 P.No. 122/Vol-2/ 13.33.4 )
40
383
15326.4
... More
har1.73 - Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.0m spacing. this includes jointing of pipes and fittings with one step solvent cementand the cost of cutting chase and making good the same including testing of joints complete as per the direction of engineer incharge of work Conclead work, including cutting chase and making good the walls etc - 20mm nominal dia pipes ( PWD SR 2023-24 P.No. 122/Vol-2/ 13.32.2 )
40
390
15614.8
... More
har1.75 - Cutting holes upto 30x30 cm in walls including making good the same : with common burnt clay F.P.S (non-modular) Bricks (CM SR 2023-24 P.No. 123/Vol-2/ 13.36)
20
332
6653.8
... More
har1.76 - Providing and fixing brass bib cock of approved quality : 20 mm nominal bore ( CM SR 2023-24 P.No. 117/Vol-1/ 13.2.2)
10
314
3141.5
... More
har1.77 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore ( CM SR 2023-24 P.No. 117/Vol-1/ 13.4.2)
3
615
1847.82
... More
har1.78 - Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete ( CM SR 2023-24 P.No. 127/Vol-2/ 13.59)
8
226
1812.8
... More
har1.79 - Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps
complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required-One urinal basin with 5 litre white P.V.C. automatic flushing cistern ( CM SR 2023-24 P.No. 131, Vol-2 ITEM NO 14.4.1)
3
4587
13762.86
... More
har1.80 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1: 6, bed concrete 150mm thick with 1: 3: 6, plastering 12 mm thick with cement mortar 1: 4, CC 1: 2: 4 coping 75mm thk for fixing CI cover and frame etc. excluding the cost of CI frame and cover.. ( CM SR 2023-24 P.No. 191/Vol-5/16.9)
3
5617
16852.86
... More
har1.81 - Providing and placing on terrace (at all floor levels) polyethylene water storage tanks, IS:12701 marked with cover and suitable locking arrangements, making necessary holes for inlet, outlet and over flow pipes but with out fittings and the base support for tank ( CM SR 2023-24 P.No 123, Vol-2 I NO 13.34)
2000
9
18540
... More
har1.82 - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m SQM using mechanical means. CM SR 2023-24 P.No. 31 Vol-3 ITEM NO -5.1 502 A(1)
750
43
32445
... More
har1.83 - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom( CM SR 2023-24 P.No. 31/Vol 3/5.3/503/A(1) )
750
12
9270
... More
har1.84 - Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 at 3.3percentage by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction( CM SR 2023-24 P.No. 32/Vol-3/5.6/504/i/C )
37.5
9278
347928.75
... More
har1.85 - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 at 5percentage by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision.( CM SR 2023-24 P.No. 43/Vol-3/5.31 )
18.75
10289
192931.875
... More
har1.86 - Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1and 2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15percentage , b) Above 30 M - 30percentage (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Bo-rewell towards yield test.( CM SR 2023-24 P.No. 140/Vol-5/ 12.4)
1
5446
5446.64
... More
har1.87 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum
working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (PWD CM SR 2023-24/VOL-5/Pg No-139/12.1) a) Upto 50m
50
381
19055
... More
har1.88 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum
working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (PWD CM SR 2023-24/VOL-5/Pg No-139/12.1) b) Above 50m upto 100m
50
477
23896
... More
har1.89 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum
working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (PWD CM SR 2023-24/VOL-5/Pg No-139/12.1) c) Above 100m upto 150m
50
507
25389.5
... More
har1.90 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum
working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (PWD CM SR 2023-24/VOL-5/Pg No-139/12.1) d) Above 150m upto 200m
10
589
5891.6
... More
har1.91 - Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge (PWD CM SR/VOL-5/Pg No-143/12.34 )
1
168
168.92
... More
har1.92 - Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensionsof caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments (PWD CM SR/VOL-5/Pg No-143/12.33 )
1
154
154.5
... More
har1.93 - Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. (PWD CM SR/VOL-5/Pg No-143/12.32 )
24
1990
47783.76
... More
har1.94 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. (PWD CM SR/VOL-5/Pg No-154/13.22.3)1x3x4.0 m2
376
139
52282.8
... More
har1.95 - Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl and Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of of work. 15.00 HP - 245 LPM at 168 m = 12 STG Outlet Dia - 2.5 CommonSR 2023-24 Volume V, Pg. No 151., Sl No- 13.18.3
1
57286
57286.54
... More
har1.96 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD CM SR/VOL-5/Pg No-154/13.24.1 ) SIZE 50 MM
1
1287
1287.5
... More
har1.97 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD CM SR/VOL-5/Pg No-154/13.25.1) SIZE 50 MM
1
1287
1287.5
... More
har1.98 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING: 1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current and dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter. Upto 6 HP pumps (PWD CM SR/VOL-5/Pg No-155/13.23.2 ) 3 to 6 HP pumps
1
9836
9836.5
... More
har1.99 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (PWD CM SR/VOL-5/Pg No-156/13.32 )
1
6695
6695
... More
har1.100 - Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. (PWD CM SR/VOL-5/Pg No-156/13.33 )
1
1390
1390.5
... More
har1.101 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (PWD ELE SR PART-1 Pg No-17 ITEM NO 5.18 ) 6-32 A TPN
1
1830
1830.31
... More
har1.102 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694colon and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (PWD ELE SR PART-1 Pg No-5 ITEM NO 2.2.1 )
30
277
8312.1
... More
har1.103 - Providing, Laying and Fixing of GI pipes conforming to IS 1239colon 1990 with latest amendments complete with GI fittings Excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) ForMedium Duty GI Pipe etc. complete. (PWD CM SR/VOL-5/Pg No-127/11.2.6 ) SIZE 50 MM
125
601
75190
... More
har1.104 - Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1)colon 2014 OPEN BUSHING TYPE
1
228610
228610.56
... More
har1.105 - Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977,For 25 63 100 kVA 4-5 Star Rated Transformer psc POLE 9M LONG 300KG WL
1
25005
25005.31
... More
har1.106 - Lightning Arrester as per IEC-60099-4, 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR
1
947
947.6
... More
har1.107 - GOS as per IS-9921, IS-1977, 11 kV, 400 Amps Double Break GOS
1
21897
21897.8
... More
har1.108 - LT Distribution Box as per IS-13947 Part-1and 2,LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal)
1
23366
23366.58
... More
har1.109 - Sheet Metal/Deep Drawn LT Metering box with wiring arrangement for Modem and DLMS meter without CTs
1
3753
3753.32
... More
har1.110 - HG Fuse Unit as per IS-5350 Part-2,11 kV, HG Fuse Unit with Solid Core Insulator
1
1101
1101.07
... More
har1.111 - Supplying of 4feet -PVC Batten with integrated LED tube 20 TO 22 W with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with CRI greater than 80. Power Inputcolon 220-240Vat 50 TO 60Hz and Power factor greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1x4feet -20/22 W
2
710
1420.2
... More
har1.112 - Supply of round/square recess/surface mounted rolling
type LED Down light with 5-6W GU 10 LED Lamp Rib
Fabricated from diecast aluminium with white powder
coated prewired to mains connector and has swivelling unit of aluminium die cast eye ball and LED Lamp position retained by circular wire spring, with Life of 25000 burning hours and 70percentage lumen maintenance with CRI greater than 80. Power Inputcolon 220-240V at 50/60Hz and Power factor greater than0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 5-6W
7
588
4116.91
... More
har1.113 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48 inch Sweep (1200mm) Regular model
2
3036
6072.88
... More
har1.114 - Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076 inch twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders
11
125
1382.26
... More
har1.115 - Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.
2
324
648.9
... More
har1.116 - Supplying heavy gauge PVC conduit pipe 19 or 20 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal or PVC Junction boxes, adhesive paste etc, and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19 or 20 mm dia 2 mm thick
125
67
8497.5
... More
har1.117 - Supplying heavy gauge PVC conduit pipe 19 or 20 dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall or stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19 or 20 mm dia 2 mm thick
100
71
7107
... More
har1.118 - Supplying PVC or GI flexible conduit pipe 20 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely. 20mm
20
19
391.4
... More
har1.119 - Supply and Installation or Fixing or Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase or Three Phase Energy Meter in suitable base plate and having a provision for Fuse or MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300 mm x 600 mm x 170 mm
2
7073
14146.02
... More
har1.120 - Grounding of towers including cost of 40 mm dia 2.5 mm thick, class C G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation charges
2
7555
15110.1
... More
har1.121 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694colon confirming to latest amendments. 1.5 sqmm
400
26
10712
... More
har1.122 - Wiring for lighting or power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694colon confirming to latest amendments. 2.5 sqmm
350
43
15141
... More
har1.123 - Wiring for lighting or power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694colon confirming to latest amendments. 4.0 sqmm
150
64
9733.5
... More
har1.124 - Supplying and fixing PVC or metal conduit Deep junction box 19 or 20mm deep junction box
16
50
807.52
... More
har1.125 - Supplying and fixing of Porcelain fuse channel with cut out on existing wooden or panel using necessary nuts, bolts and washers 63A
1
413
413.03
... More
har1.126 - Fabricating supplying and mounting MS box made out
14 SWG suitable for floor or wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc, complete. 14 SWG
10000
-
5100
... More
har1.127 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS1554 (Part1) or IS-7098 Part1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm)
0.04
143735
5749.4188
... More
har1.128 - Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240 or 450V upto 300mA sensitivity on existing wood or panel board. 16-25 A 2 pole
3
4405
13215.93
... More
har1.129 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood or panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. icro processor release shall have Earth Fault as per IS-13947. (Icu equals to 100percentage lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit or Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the
poles simultaneously and they shall have a single mechanism. 100 A 25 kA
2
6268
12537.16
... More
har1.130 - Supplying and fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and C Type curve, indicator ON or OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP
3
761
2283.51
... More
har1.131 - Supplying and fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and C Type curve, indicator ON or OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN
2
1768
3537.02
... More
har1.132 - Supplying and fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and C Type curve, indicator ON or OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP
2
427
854.9
... More
har1.133 - Supplying and fixing surface or flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick or C.C wall, including necessary rawl plugs, Machine or NF screws etc, complete. 1-2 way
2
106
212.18
... More
har1.134 - Supplying and fixing surface or flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with
due groove cutting in Brick or C.C wall, including necessary rawl
plugs, Machine or NF screws etc, complete. 4-5 way
4
141
564.44
... More
har1.135 - Supplying and fixing surface or flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with
due groove cutting in Brick or C.C wall, including necessary rawl
plugs, Machine or NF screws etc, complete. 6 way
3
178
534.57
... More
har1.136 - Supplying and fixing surface or flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick or C.C wall, including necessary rawl plugs, Machine or NF screws etc, complete. 8 way
2
225
451.14
... More
har1.137 - Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C.C wall. 1-2 way
2
142
284.28
... More
har1.138 - Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C.C wall. 4-5 way
4
182
729.24
... More
har1.139 - Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C.C wall. 6 way
4
226
906.4
... More
har1.140 - Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C.C wall. 8 way
2
268
537.66
... More
har1.141 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal or PVC box. 1-2 Module
2
141
282.22
... More
har1.142 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal or PVC box. 4 Module
4
180
721
... More
har1.143 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal or PVC box. 6 Module
4
241
964.08
... More
har1.144 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal or PVC box. 8 Module
7
292
2047.64
... More
har1.145 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module
2
367
735.42
... More
har1.146 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 or 16A Universal Socket
53
243
12883.24
... More
har1.147 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV or Telephone Socket
1
160
160.68
... More
har1.148 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS3854 and IS1293 RJ45 IO Outlet Cat-6
1
347
347.11
... More
har1.149 - Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable 1 pair
30
15
463.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%