Directorate Of Municipal Administration Tender

code04 - Stainless Steel Slide Length-20 feet,Width-4 feet,Height-5 feet All Structures are Gi B Class pipes.Center poles are 90mm single Support pole.slide Portion will be of Stainless steel heavy gauge sheets will Supporting pipes of GI.2x2 platform will be provided for the standing after the steps for child safety.Platform Height is 5 feet.slide portion Length will be 8.5 feet for avoiding corrosion marine paints are used which will protect product from coastal weather conditions.

code05 - Market Rate of Common Materials Sand - M-Sand

code06 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge

code07 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

code08 - 1.4 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m

code09 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates

code10 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

code11 - Fabricating, supplying and erection of ...ms long hot dipG alvanized Octagonal hot dip Pole with BSEN 10025 grade S355J Osteel plate for shaft, IS2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47m/sfor.......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom.....mm, top....mm with 3 mmt hick,suitable base plate and 4N osof..... long Jboltsa long with template and the Pole shall be hot dip galvanized in single dipping withnot lessthan 65 micronas perASTM-A123and153etc., (excluding foundation) as per drawing appended.-5 m - Top 75 mm and Bottom 125 mm dia

code12 - Supply of LED floodlight luminaire with pressure die cast aluminium housingbody for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output Rated life Burning Hrs 50000 hr at LumenMaintenance of 70 perantage, CCT greater than 5500K, IP 66 optical and electrical compartment& impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 withmains, Surge Protection- Min 5KV along with Over voltage/ Overload,short circuit/ miss-wiring protection. Compatible for pole mauling with outerdia of 40mm to 50mm. Universal Voltage driver to operate wide voltage rangefrom 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598,LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top accessstreet light with single screw to ensure ease of maintenance at the sight sitelocation with minimized minimal tools. LED Light fixture with W SystemPower consumption LED Efficiency greater than 1301m/w, nominal CRI Greater than 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI and anyGovernment certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved /Embossing on the die cast housing / Body part Warranty of 2 Years against anymanufacturing defect working under standard electrical conditions as mentionedabove should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osrammake LED Source. 11.9.2 LED Floodlight 70W

code13 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materialsand C Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 40AMPS TPN

code14 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.-Double Arm Bracket with 1000 mm Standard 40/50 mm dia

code15 - Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 core 16 sqmm

code16 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.

code17 - Supply of LED pole mounting type post top lantern with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injectionmoulded polycarbonate/ clear glass material delivering superior light output Rated life BurningHrs50000hr and Lumen Maintenance of 70 percentage CCT 5500K IP66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08.PowerFactor greater than 0.9withmains, Surge Protection Min 5KV along with Over voltage/Overload, short circuit/miss wiring protection. Compatible for pole mounting with outer dia of 40mm to50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. CompliancetoIS10322/1EC60598, LM79 and LM 80 Adherence with Ro HS. U L approved MCPCBLED Efficiency greater than 1301m/w nominal CRI greater than 75.Luminaire manufacturer should have in-house facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO9001:2008.Housing with supplier wordmark /name shall be Engraved / Embossing on the diecast using /Body part Warrantyof2Yearsagainstany manufacturing defectworkingunderstandardelectricalconditions as mentioned above should be given by LED manufacturer and Cree/Nichia/Lumileds/Osram make LED Source- LED Post Top Lantern with 15/20 W

code18 - Fixing charges of post top/ Gate/ Garden fitting /LED on the existingCI/GIoranyotherpipeusingrequired sizeofreducer,wiring using suitable wires.

code19 - Supplying heavygaugePVCconduit pipe ....... dia .......mmthick confirming to IS 2509 with suitable size bends, junction boxes, adhesive pasteetc , andfixingusinginvertedwoodplugs incaseof RCCceilingandRCCwall/ stonestructureor rawl plugs incaseof brickwalls andcement plastering thedamagedportionusingheavy gauge saddles at an interval of 700mm using NF screws-25 mm dia 2 mm thick.

code20 - Supplying and wiring adopting loop system in existing PVC Conduit /casingcapping using2x1.5Sqmm(Phase&Neutral) & 1x1.0 sqmm(Earthwire) FRLSmultistrand PVC insulated copper wire (confirming toIS-694:andlatestamendments)with a6AmpsflushtypeSPcontrolswitchshallbefixedontheexisting plasticsheet/gangbox, theotherendof thewiresshallbeterminated withsufficient looselengthinawood/PVCroundblock.completefor each outlet.-Longpoint above6Mtrupto10Mtr fromtappingpoint toout letvia switch

code21 - Reparing of big double swing by Supplying and Welding new metal Rod including men and materials

code22 - Reparing of Steps by providing new metal steps for Slides unit including men and materials

code23 - Reparing of big four seater double swing by Supplying and Welding new seats including men and materials