Directorate Of Municipal Administration Tender

KSSRB M300- 55 Construction of sub-grade and earthen shoulders with approved marteial Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table no 300-2 complete as per specifications.(which include watering charges & compaction by vibratory roller) MORTH Specification no 305.(PWP&IWTD Ballari Circle SR 2018-19, P.No-147 I.No-19.62)

KSSRB M400-17 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. complete as per specifications. MORTH Specification no 406.(PWP&IWTD Ballari Circle SR 2018-19, P.No-155 I.No-20.18)

Cement concrete pavement. Construction unreinforced plain cement concrete pavement thickness as per design over a prepared sub-base with OPC cement, or any other type as per clause 1051.2.2 25mm, & down size graded granite metal coarse and fine aggregate with superplasticizer@3ltrs conforming to IS 9103-1999 Reaffirmed 2008 coarse & fine aggregatemixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates, including levelling the form work as per drawing) Spreading the concrete with shovels, rackers compacted using needle,screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion,construction and longitudinal joints, joints filler, seperation membrane, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines, and grades as per drawing complete as per specifications M30 (at 360Kg per cum coarse aggregate @ 0.69cum and fine aggregate @ 0.46cum)(PWP&IWTD Ballari Circle SR 2018-19, P.No-175 I.No-22.6.1)

KSRB 14.6.1 : Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture compressive strength of approved size, shape and colour with a minimum compressive stregnth of 281 kg per sqm over 50mm thick sand bed compaction force threby forcing part of sand undermeath to come up in between joints, final bed (average thickness) compacting with plate vibrator having 3 tons compaction force there by forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level,including, cost of materials, labour and HOM of machineries complete as per specification No.KBS KSRB 14.7 : -Do- heavy duty cobble stones 75mm thick. (PWP&IWTD Ballari Circle SR 2018-19, P.No-103 I.No-14.7)

Levlling Materials fro Pavers (Chips)(PWP&IWTD Ballari Circle SR 2018-19, P.No-II I.No-43)

KSRB 4-1.5: Providing and laying position plain cement concrete of mix M20 with OPC cement @ 300 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.43cum ,machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machiniery, curing complete as per specifications. (PWP&IWTD Ballari Circle SR 2018-19, P.No-13 I.No-4.5)

KSRRB M200-15.1 : Dismantling of existing strutctures like culverts,bridges, retaining of walls and other strutcture comprising of masonary, cement concrete, wood work,steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable materials, stacking the serviceable materials with all lifts and lead of 1000 metres, complete as per specifications. specifications, ii) Dismantling stone Masonary.A. Rubble Stone masonary lime mortar. MORTH specifications No 202 KSRRB M200-15.2 -do- B Rubble stone masonary in cement mortar. (PWP&IWTD Ballari Circle SR 2018-19, P.No-139 I.No-18.27)

KSRB 2-2.1: Earthwork excavation by manual means for foundation of buildings,culverts,water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches,stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. (PWP&IWTD Ballari Circle SR 2018-19, P.No-6 I.No-2.3)

KSRB 4-1.3: Providing and laying in position plain cement concrete of mix M1:4:8 with OPC cement @ 180kgs, with 40 mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57 cum machine mixed,machine mixed, concrete lain in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machiniery, curing complete as per specifications. Specification. No. KBS 4.1,4.2 (PWP&IWTD Ballari Circle SR 2018-19, P.No-13 I.No-4.3)

KSRB 4.2.2: Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320 kgs, with 20 mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.46cum, with superplastisiser @ 3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings,pedastals,retaining walls,return walls,walls(any thickness) including attached pilaster, columnspillars, posts,struts, buttresses,bed blocks,anchor blocks & plinths etc., including cost of all materials, labour, HOM of Specifications. Specification. No. KBS 4.1,4.6 (PWP&IWTD Ballari Circle SR 2018-19, P.No-14 I.No-4.11)

KSRB 4-9.2: Providing T.M.T steel reinforcement for R.C.C. work including straightening,cutting, bending, hooking, placing in position, lapping and/ or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid ) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 do-for TMT Bars Fe 500 (PWP&IWTD Ballari Circle SR 2018-19, P.No-18 I.No-4.46.2)

KSRB 4-6.4: Providing and romoving centering, shutting, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specifications.Specification No. KBS 4.6.2 (PWP&IWTD Ballari Circle SR 2018-19, P.No-16 I.No-4.31)