Department Of Youth Empowerment And Sports Tender

COMPOUND04 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates

COMPOUND05 - Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

COMPOUND06 - Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

COMPOUND07 - Supplying, Fitting and Placing TMT Fe 500 and above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.Issue rate 07.04.2022.

COMPOUND08 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part I) 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.

COMPOUND09 - Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge

COMPOUND10 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

COMPOUND11 - Providing and fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.

COMPOUND12 - Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied at 1.43 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.

COMPOUND13 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge

COMPOUND14 - Providing and laying Vitrified tiles with thickness 9 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

COMPOUND15 - Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardwareand Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor TandPs shall not be made)

COMPOUND16 - P.P GRATINGS MILKY WHITE: Supplying and fixing PP Gratings ( Milky white) over flow gutter gratings made of Polyprolene materials of standard size and diamentions used for swimming pools including transporation, lifting and Unloading inclusive all Taxes HOM of Machinaries, Fabrications, Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work.

COMPOUND17 - SS HAND RAIL: Providing fixing errecting fabricating S.S Handrails of 1 1/2 inch dia x 16 guage x 304 g. pipe using SS Circles and fixed to the swimming pool wall with S.S Achoring bolts for 1 Rft including transporation,

COMPOUND18 - SS RINGS FOR LANE SEPARATOR: Providing Supplying SS. Rings for Lane separator fabricated in 4inch dia x 16 G x 304 G Pipe with S.S Rod including transporation, lifting and Unloading inclusive all Taxes HOM of Machinaries, Fabrications, Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work.

COMPOUND19 - PLUMBING All allied fixtures and fittings Complete for complete working of the swimming pool. All items to be of IS standard and reputed make.

COMPOUND20 - Line separator Float lane

COMPOUND21 - Starting block for swimming pool improved Stainless steel with fiber

COMPOUND22 - INSTALLATION : Installation of all the equipments for the purpose of functioning of swimming pool with necessary staff men material labours, including transportation, lifting and unloading inclusive all taxes HOM of machineries, fabrications, labour charges etc., complete as per additional technical Bid document special specification enclosed for the successful completion of the work and as per the directions for the Engineering in charge of the work

COMPOUND23 - Waste water soak pit providing RCC ring ,RCC slab and Including excavation .(MR)

COMPOUND24 - BUTTERFLY VALVES AND FLANGES: PVC Butterfly Valves of 160mm with PVC flange Adapter, with nuts and bolts Make: Supreme / Cepex / Equivalent