Department Of Youth Empowerment And Sports Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Department Of Youth Empowerment And Sports - DYES Tender
Civil And Construction
Building Construction
Opening Date10 Oct 2024
Closing Date25 Oct 2024
Tender Amount₹ 29,63,160.82
Costs
EMD
₹ 59,264Document Cost
Refer DocumentsTender Fee
₹ 750
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DYES/2024-25/BD/WORK_INDENT22Tender No
DYES/2024-25/BD/WORK_INDENT22Tender Authority
Department Of Youth Empowerment And Sports ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
ITEM00004 - Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Item no -5.4/ Page no -9/ Vol-2/ PWD SR 23-24
18.3935
7027
129267.67865
ITEM00005 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Item no -1.9/ Page no -7/ Vol-1/ PWD SR 23-24)
36.3033
292
10622.34558
ITEM00006 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24 -PLINTH BEAM
2.1445
10261
22005.465075
ITEM00007 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24 -COLUMN
1.7015
11629
19787.645295
ITEM00008 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24 -LINTEL AND BEAM
2.0079
10945
21977.348976
ITEM00009 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24 -ROOF SLAB
4.7025
10261
48253.998375
ITEM00010 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Building (Item no -2.11.a/ Page no -18/ Vol-1/ PWD SR 23-24)
4.3424
98402
427303.88448
ITEM00011 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specification.(Item no -6.33/ Page no -17/ Vol-2/ PWD SR 23-24)
79.3417
1354
107436.59597
ITEM00012 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications (Item no -6.34/ Page no -17/ Vol-2/ PWD SR 23-24)
4.505
1214
5470.872
ITEM00013 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Item no -8.1.1/ Page no -41/ Vol-2/ PWD SR 23-24)
20.528
280
5758.104
ITEM00014 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (Item no -8.2.2/ Page no -41/ Vol-2/ PWD SR 23-24)
95.8417
306
29413.81773
ITEM00015 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Item no -8.3.2/ Page no -41/ Vol-2/ PWD SR 23-24)
114.11
366
41798.493
ITEM00016 - Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08percent and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).2. Size of Tile 600x600 mm (Item no -9.22.2/ Page no -62/ Vol-2/ PWD SR 23-24)
23.636
1458
34475.4696
ITEM00017 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. (Item no -10.14/ Page no -71/ Vol-2/ PWD SR 23-24)
16.46
1216
20025.236
ITEM00018 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (Item no -11.34A/ Page no -77/ Vol-2/ PWD SR 23-24)
223.4925
184
41301.414
ITEM00019 - Providing Honne wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600mm c/c and cross battons 38mmx50mm at 600 mm c/c sawn and putup including cost of materials, labour complete as per specifications. (Item no -12.7/ Page no -99/ Vol-2/ PWD SR 23-24)
0.2548
152336
38815.41664
ITEM00020 - Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures )(Item no -12.15/ Page no -100/ Vol-2/ PWD SR 23-24)
5.88
8188
48147.792
ITEM00021 - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum) toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)12.94.2 35 mm thickness (Item no -12.94.2/ Page no -112/ Vol-2/ PWD SR 23-24)
1.575
4445
7001.0325
ITEM00022 - Providing and fixing of 2.5 track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardwareand single point locking system with touch lock. Wall thickness of frame and sash shall be of 1.8 2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor TandP's shall not be made) (Item no 12.87/ Page no 109/ Vol-2/ PWD SR 23 24)
10.6425
7206
76690.91925
ITEM00023 - Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor TandP's shall not be made) (Item no-12.85/ Page no -109/ Vol-2/ PWD SR 23-24)
0.2025
6290
1273.90725
ITEM00024 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Item no-8.51/ Page no -50/ Vol-2/ PWD SR 23-24)
116.3697
110
12800.667
ITEM00025 - Finishing walls with 100percent Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied at 1.43 L/ 10 Sqm. Over and including priming coat of exterior primer applied at 0.90 L/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Item no-8.32/ Page no -46/ Vol-2/ PWD SR 23-24)
116.3697
171
19969.04052
ITEM00026 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67L/10 Sqm over and including priming coat of exterior primer applied at 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.. (Item no-8.30/ Page no -46/ Vol-2/ PWD SR 23-24)
114.116
191
21841.8024
ITEM00027 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Item no-8.41/ Page no -48/ Vol-2/ PWD SR 23-24)
26.5331
183
4874.13047
ITEM00028 - polyurethane based single Component for New surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400percent and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (Item no-15.1/ Page no -149/ Vol-2/ PWD SR 23-24)
24.678
898
22178.1186
ITEM00029 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.10.1.7 .PVC pipes 110mm dia.6kg/sqm and class 3 (Item no-10.1.7/ Page no -113/ Vol-5/ PWD SR 23-24)
24.6
411
10110.6
ITEM00030 - 10.1.5 PVC pipes 75mm dia., 6 kg/sqcm and class 3 (Item no-10.1.5/ Page no -113/ Vol-5/ PWD SR 23-24)
12
220
2640
ITEM00031 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :14.2.1 W.C. pan with ISI marked white solid plastic seat and lid . (Item no-14.2.1/ Page no -131/ Vol-2/ PWD SR 23-24)
1
5321
5321.8
ITEM00032 - Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :14.25.1 Flat back wash basin of size 630x450 mm (Item no-14.25.1/ Page no -135/ Vol-2/ PWD SR 23-24)
1
1084
1084.6
ITEM00033 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. 13.33.2 External work 20 mm nominal dia Pipes (Item no-13.33.2/ Page no -122/ Vol-2/ PWD SR 23-24)
25
238
5967.5
ITEM00034 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. 13.33.3 External work 25 mm nominal dia Pipes (Item no-13.33.3/ Page no -122/ Vol-2/ PWD SR 23-24)
20
325
6512
ITEM00035 - Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet and over flow pipes. The base support i/c fittings and fixtures for tank shall be paid separately. (Item no-13.34A/ Page no -123/ Vol-2/ PWD SR 23-24)
1000
9
9900
ITEM00036 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (Item no-13.15/ Page no -119/ Vol-2/ PWD SR 23-24)
1
797
797.5
ITEM00037 - Providing and fixing 100 mm sand cast Iron grating for gully trap (Item no-14.29/ Page no -136/ Vol-2/ PWD SR 23-24)
2
53
107.8
ITEM00038 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 50 mm nominal bore (Item no-13.4.4/ Page no -117/ Vol-2/ PWD SR 23-24)
1
940
940.5
ITEM00039 - Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore (Item no-13.8.2.2/ Page no -118/ Vol-2/ PWD SR 23-24)
2
121
242
ITEM00040 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe (Item no-14.28.2.1/ Page no -136/ Vol-2/ PWD SR 23-24)
1
101
101.2
ITEM00041 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 (Item no-13.53/ Page no -126/ Vol-2/ PWD SR 23-24)
1
6206
6206.2
ITEM00042 - Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape 450x350 mm (outer dimensions) (Item no-14.32.3/ Page no -136/ Vol-2/ PWD SR 23-24)
1
1172
1172.6
ITEM00043 - 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. (Item no-14.40.1/ Page no -137/ Vol-2/ PWD SR 23-24)
1
525
525.8
ITEM00044 - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary.19/20 mm dia 2 mm thick (Item no-1.2.1/ Page no -2/ Vol-6/ PWD ELE SR 23-24)
60
66
3960
ITEM00045 - Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.75 x 75 x 65 mm (Item no-1.4.1/ Page no -2/ Vol-6/ PWD ELE SR 23-24)
12
106
1272
ITEM00046 - Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box (Item no-1.5.1/ Page no -2/ Vol-6/ PWD ELE SR 23-24)
4
49
196
ITEM00047 - Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 (Item no-2.3.1/ Page no -5/ Vol-6/ PWD ELE SR 23-24) - 1.5 SQMM
80
19
1520
ITEM00048 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 (Item no-2.3.1/ Page no -5/ Vol-6/ PWD ELE SR 23-24) - 2.5 SQMM
70
42
2940
ITEM00049 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 (Item no-2.3.1/ Page no -5/ Vol-6/ PWD ELE SR 23-24) - 4 SQMM
65
63
4095
ITEM00050 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Item no-3.5.1/ Page no -8/ Vol-6/ PWD ELE SR 23-24) - 1-2 MODULE
4
137
548
ITEM00051 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Item no-3.5.1/ Page no -8/ Vol-6/ PWD ELE SR 23-24) - 4 MODULE
3
175
525
ITEM00052 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Item no-3.5.1/ Page no -8/ Vol-6/ PWD ELE SR 23-24) - 6 MODULE
3
234
702
ITEM00053 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Item no-3.5.1/ Page no -8/ Vol-6/ PWD ELE SR 23-24) - 8 MODULE
3
284
852
ITEM00054 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC
60898. 5.18.1 6-32 A SP (Item no-5.18.1/ Page no -17/ Vol-6/ PWD ELE SR 23-24)
1
415
415
ITEM00055 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release,
Micro processor release shall have Earth Fault as per IS/IEC 60947-2. (Icu=100percent lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the
MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles
simultaneously and they shall have a single mechanism 5.15.1 100 A 25 kA (Item no-5.15.1/ Page no -17/ Vol-6/ PWD ELE SR 23-24)
1
6086
6086
ITEM00056 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia (Item no-12.56/ Page no -54/ Vol-6/ PWD ELE SR 23-24)
1
3510
3510
ITEM00057 - Supplying and fixing/replacing of fluorescent tube 65 to 80W (Item no-12.12.2/ Page no -48/ Vol-6/ PWD ELE SR 23-24)
8
242
1936
ITEM00058 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. (Item no-6.3.1/ Page no -30/ Vol-6/ PWD ELE SR 23-24)
3
2984
8952
ITEM00059 - TOILET- Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage and other appurtenances required to complete the work.Inordinary/soft rock without blasting upto 1.5 m depth , Cost of De-watering upto 5 percent may be added , where required assessment for dewatering shall be made as per site condition - Item no -1.5.1 , Page no - 6 , Vol -1 SR 23-24
41.2605
279
11532.722355
ITEM00060 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately)- Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Item no -2.1.2, Page no -15 , Vol -1 PWD SR 23-24
12.8367
6417
82377.083277
ITEM00061 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24
7.2778
7388
53769.623626
ITEM00062 - Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Item no -5.4/ Page no -9/ Vol-2/ PWD SR 23-24
15.1722
7027
106628.70438
ITEM00063 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Item no -1.9/ Page no -7/ Vol-1/ PWD SR 23-24)
41.2605
292
12072.8223
ITEM00064 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24 -PLINTH BEAM
2.3787
10261
24408.673245
ITEM00065 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24 -COLUMN
1.6146
11629
18777.039138
ITEM00066 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24 -LINTEL AND BEAM
2.0152
10945
22057.250688
ITEM00067 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24 -ROOF SLAB
4.9005
10261
50285.745675
ITEM00068 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Building (Item no -2.11.a/ Page no -18/ Vol-1/ PWD SR 23-24)
2.728
98402
268442.5656
ITEM00069 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specification.(Item no -6.33/ Page no -17/ Vol-2/ PWD SR 23-24)
77.169
1354
104494.5429
ITEM00070 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications (Item no -6.34/ Page no -17/ Vol-2/ PWD SR 23-24)
22.551
1226
27659.70354
ITEM00071 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Item no -8.1.1/ Page no -41/ Vol-2/ PWD SR 23-24)
24.678
280
6922.179
ITEM00072 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (Item no -8.2.2/ Page no -41/ Vol-2/ PWD SR 23-24)
138.759
306
42585.1371
ITEM00073 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Item no -8.3.2/ Page no -41/ Vol-2/ PWD SR 23-24)
110.88
366
40615.344
ITEM00074 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. (Item no -10.14/ Page no -71/ Vol-2/ PWD SR 23-24)
109.658
1216
133409.9228
ITEM00075 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (Item no -11.34A/ Page no -77/ Vol-2/ PWD SR 23-24)
81.648
184
15088.5504
ITEM00076 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge.. (Item no -11.5.1/ Page no -77/ Vol-2/ PWD SR 23-24)
13.23
5743
75981.213
ITEM00077 - Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Item no-11.10.1/ Page no -79/ Vol-2/ PWD SR 23-24)
36.45
48
1764.18
ITEM00078 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Item no-8.51/ Page no -50/ Vol-2/ PWD SR 23-24)
163.437
110
17978.07
ITEM00079 - Finishing walls with 100percent Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied at 1.43 L/ 10 Sqm. Over and including priming coat of exterior primer applied at 0.90 L/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Item no-8.32/ Page no -46/ Vol-2/ PWD SR 23-24)
163.4372
171
28045.82352
ITEM00080 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67L/10 Sqm over and including priming coat of exterior primer applied at 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.. (Item no-8.30/ Page no -46/ Vol-2/ PWD SR 23-24)
110.88
191
21222.432
ITEM00081 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Item no-8.41/ Page no -48/ Vol-2/ PWD SR 23-24)
22.9162
183
4209.70594
ITEM00082 - polyurethane based single Component for New surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400percent and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (Item no-15.1/ Page no -149/ Vol-2/ PWD SR 23-24)
25.92
898
23294.304
ITEM00083 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.10.1.7 .PVC pipes 110mm dia.6kg/sqm and class 3 (Item no-10.1.7/ Page no -113/ Vol-5/ PWD SR 23-24)
62.8
411
25810.8
ITEM00084 - 10.1.5 PVC pipes 75mm dia., 6 kg/sqcm and class 3 (Item no-10.1.5/ Page no -113/ Vol-5/ PWD SR 23-24)
40
220
8800
ITEM00085 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :14.2.1 W.C. pan with ISI marked white solid plastic seat and lid . (Item no-14.2.1/ Page no -131/ Vol-2/ PWD SR 23-24)
6
5321
31930.8
ITEM00086 - Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :14.25.1 Flat back wash basin of size 630x450 mm (Item no-14.25.1/ Page no -135/ Vol-2/ PWD SR 23-24)
2
1084
2169.2
ITEM00087 - Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cister (Item no-14.4.1/ Page no -131/ Vol-2/ PWD SR 23-24)
4
4899
19597.6
ITEM00088 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. 13.33.2 External work 20 mm nominal dia Pipes (Item no-13.33.2/ Page no -122/ Vol-2/ PWD SR 23-24)
125
238
29837.5
ITEM00089 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. 13.33.3 External work 25 mm nominal dia Pipes (Item no-13.33.3/ Page no -122/ Vol-2/ PWD SR 23-24)
45
325
14652
ITEM00090 - Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet and over flow pipes. The base support i/c fittings and fixtures for tank shall be paid separately. (Item no-13.34A/ Page no -123/ Vol-2/ PWD SR 23-24)
1000
9
9900
ITEM00091 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (Item no-13.15/ Page no -119/ Vol-2/ PWD SR 23-24)
2
797
1595
ITEM00092 - Providing and fixing 100 mm sand cast Iron grating for gully trap (Item no-14.29/ Page no -136/ Vol-2/ PWD SR 23-24)
8
53
431.2
ITEM00093 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 50 mm nominal bore (Item no-13.4.4/ Page no -117/ Vol-2/ PWD SR 23-24)
1
940
940.5
ITEM00094 - Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore (Item no-13.8.2.2/ Page no -118/ Vol-2/ PWD SR 23-24)
6
121
726
ITEM00095 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe (Item no-14.28.2.1/ Page no -136/ Vol-2/ PWD SR 23-24)
2
101
202.4
ITEM00096 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 (Item no-13.53/ Page no -126/ Vol-2/ PWD SR 23-24)
7
6206
43443.4
ITEM00097 - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary.19/20 mm dia 2 mm thick (Item no-1.2.1/ Page no -2/ Vol-6/ PWD ELE SR 23-24)
45
66
2970
ITEM00098 - Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.75 x 75 x 65 mm (Item no-1.4.1/ Page no -2/ Vol-6/ PWD ELE SR 23-24)
4
106
424
ITEM00099 - Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box (Item no-1.5.1/ Page no -2/ Vol-6/ PWD ELE SR 23-24)
4
49
196
ITEM00100 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 (Item no-2.3.1/ Page no -5/ Vol-6/ PWD ELE SR 23-24) - 1.5 SQMM
50
19
950
ITEM00101 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 (Item no-2.3.1/ Page no -5/ Vol-6/ PWD ELE SR 23-24) - 2.5 SQMM
45
42
1890
ITEM00102 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 (Item no-2.3.1/ Page no -5/ Vol-6/ PWD ELE SR 23-24) - 4 SQMM
30
63
1890
ITEM00103 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Item no-3.5.1/ Page no -8/ Vol-6/ PWD ELE SR 23-24) - 1-2 MODULE
4
137
548
ITEM00104 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Item no-3.5.1/ Page no -8/ Vol-6/ PWD ELE SR 23-24) - 4 MODULE
2
175
350
ITEM00105 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Item no-3.5.1/ Page no -8/ Vol-6/ PWD ELE SR 23-24) - 6 MODULE
1
234
234
ITEM00106 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Item no-3.5.1/ Page no -8/ Vol-6/ PWD ELE SR 23-24) - 8 MODULE
1
284
284
ITEM00107 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5.18.1 6-32 A SP (Item no-5.18.1/ Page no -17/ Vol-6/ PWD ELE SR 23-24)
1
415
415
ITEM00108 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release,
Micro processor release shall have Earth Fault as per IS/IEC 60947-2. (Icu=100percent lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the
MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles
simultaneously and they shall have a single mechanism 5.15.1 100 A 25 kA (Item no-5.15.1/ Page no -17/ Vol-6/ PWD ELE SR 23-24)
1
6086
6086
ITEM00109 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia (Item no-12.56/ Page no -54/ Vol-6/ PWD ELE SR 23-24)
1
3510
3510
ITEM00110 - Supplying and fixing/replacing of fluorescent tube 65 to 80W (Item no-12.12.2/ Page no -48/ Vol-6/ PWD ELE SR 23-24)
6
242
1452
ITEM00111 - Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage and other appurtenances required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth , Cost of De-watering upto 5 percent may be added , where required assessment for dewatering shall be made as per site condition - Item no -1.5.1 , Page no - 6 , Vol -1 SR 23-24
9.72
279
2716.8372
ITEM00112 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately)- Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Item no -2.1.2, Page no -15 , Vol -1 PWD SR 23-24
0.486
6417
3118.81266
ITEM00113 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(Item no -6.32/ Page no -17/ Vol-2/ PWD SR 23-24)
18.24
1441
26283.84
ITEM00114 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately)- Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Item no -2.1.6, Page no -15 , Vol -1 PWD SR 23-24
0.294
7073
2079.55608
ITEM00115 - Ready Mix Concrete (RMC) with Cement and Cementitious Materials.Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percent and GGBS at 25percent proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.C. RMC M25 Grade Item no -2.10.C/ Page no -18/ Vol -1/ PWD SR 23-24
0.486
10261
4987.0161
ITEM00116 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Building (Item no -2.11.a/ Page no -18/ Vol-1/ PWD SR 23-24)
0.0607
98402
5973.04389
ITEM00117 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (Item no -8.2.2/ Page no -41/ Vol-2/ PWD SR 23-24)
15.12
306
4640.328
ITEM00118 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. 13.33.3 External work 25 mm nominal dia Pipes (Item no-13.33.3/ Page no -122/ Vol-2/ PWD SR 23-24)
80
325
26048
ITEM00119 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore . (Item no-13.4.4/ Page no -117/ Vol-2/ PWD SR 23-24)
1
940
940.5
ITEM00120 - 1.00 HP/0.75KW , 7 STG (Item no-13.6.1/ Page no -149/ Vol-5/ PWD SR 23-24)
1
14649
14649.8
ITEM00121 - Providing, Providing and fixing in position of High density poly ethylene Machinehole of 1200 mm internal diameter for all depths with top opening of 600mm, PE Machinehole chambers shall be on the basis of EN13598-2:9009 shall meet relevant BIS/ASTM standards and specifications. All chambers shall be of a solid single wall 100mm or greater thickness construction made of 100percent virgin PE material without recycling or foam content. All chambers shall come with a prefabricated integrated base with apprpriate benching with a gredient of 1-2percent. The Machinehole shall be seated on M10 cement concrete (1:3:6) of 200mm depth. The inlet pipes to be connected with elastomer seal for a flexible connection of pipes according to EN 681-1. The Machinehole shall have straight channel DN 200 with four extra inlets DN 200/160/110, 45o and 90o right and left and drop arrangement if required and Outlet DN 200/160/110 including steps. The Machinehole shall also be designed to receive house connection at shaft level as per requirement. In cas the system is made of midular parts then triple safety (three sided lip/ element) seal according to standard practices to be used to connect the parts. Machinehole shall have corrossion resistance steps vertical step distance 25 cms in order to safe guard against uplift pressure, Machinehole should have solid horizontal re-inforcement ribs of appropriate thickness and width. These ribs should be stratagically placed at regular intervals all along the outside of the shaft of the Machinehole. During installation, special care must be taken to ensure proper compaction of the excavated earth with proctar density of 95percent, below and around the Machinehole, suitably anchored over concrete to take traffic load without settlement. HDPE Machinehole of 1200mm dia and 1.0 m to 2.0 m Height (Item no-16.24.2/ Page no -197/ Vol-5/ PWD ELE SR 23-24)
2
32131
64262
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements