Department Of Youth Empowerment And Sports Tender

ITEM0004 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a.Buildings (PWD CSR VOL I for the year 2023-24. I. No. 2.11.a P.No. 18)

ITEM0005 - Fabrication, Supplying, Erection, Testing and Commissioning of ...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data. (CSR-2023-24/PWD/Elec./Part-I/It.No.4.5.1.,Page No. 13)

ITEM0006 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000hr @ Lumen Maintenance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certifiedagency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osrammake LED Source. (CSR-2023-24/PWD/Elec./Part-I/It.No.11.9.7.,Page No. 37) LED Floodlight 240W

ITEM0007 - Supplying & fixing of Hot dip galvanised MS Bracket suitable for outdoor luminaries and mounted on octagonal pole using necessary bolts, nuts etc, complete single arm bracket with 2000mm standard 40/50mm dia (CSR-2023-24/PWD/Elec./Part-I/It.No.4.6.3.,Page No. 13)

ITEM0008 - Fixing halogen/metal halide/SVL/IL/LED floodlight fitting overexisting pole/ wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. (CSR-2023-24/PWD/Elec./Part-I/It.No.13.5.,Page No. 56)

ITEM0009 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS-694:2010.. (CSR-2023-24/PWD/Elec./Part-I/It.No.2.5.12.,Page No. 06)

ITEM0010 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.. (CSR-2023-24/PWD/Elec./Part-I/It.No.2.3.5.,Page No. 05)

ITEM0011 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia (CSR-2023-24/PWD/Elec./Part-I/It.No.12.56 ,Page No. 54)

ITEM0012 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (CSR-2023-24/PWD/Elec./Part-I/It.No.5.41.1.,Page No. 20)

ITEM0013 - Supplying and installation/fixing/Provision of outdoor type Thermoplastic modular panel enclosure with polycarbonate lid, shock proof, IP65 (weather proof), rustproof, dust proof, waterproof, corrosion proof having internally Embadded gasket on both lid & flap suitable to fix single phase/three phase energy meter in suitable base plate and having a provision for fuse / MCB cut out with suitable transparent hinged flap opening for operating MCB along with complete temper proof SEALING facility 300mm x 600mm x 170mm (CSR-2023-24/PWD/Elec./Part-I/It.No.5.44.3.,Page No. 21)

ITEM0014 - Supplying and fixing of porclain fuse channel with cut out on existing wooden/ panel using necessary nutts, bolts, washers. Upto 63Amps (CSR-2023-24/PWD/Elec./Part-I/It.No.5.7.3.,Page No. 14)

ITEM0015 - Supply and fixing of 3 pole power contact or with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washersand wiring etc., complete with AC-3 Rating and as per IS-13947. 40A (CSR-2023-24/PWD/Elec./Part-I/It.No.5.13.2 ,Page No. 16)

ITEM0016 - Fabricating suppluing and mounting MS box made out……SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equiprrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc.. complete (CSR-2023-24/PWD/Elec./Part-I/It.No.5.42.1 ,Page No. 20) 14SWG

ITEM0017 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.. (CSR-2023-24/PWD/Elec./Part-I/It.No.5.48.,Page No. 21)

ITEM0018 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (CSR-2022-23/Distribuion/BESCOM-Part-II/Sl.No.205/It.No.32.09, Page No.13)

ITEM0019 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff (CSR-2022-23/Distribuion/BESCOM-Part-III/Sl.No.175/It.No.31.06, Page No.09)

ITEM0020 - HDPE pipe grade PE80-PN8.0, 75mm (Water Supply & Sewerage Works CSR of VOL 5 for the year 2023-24 Sl No 516 Page No A-39)