Department Of Youth Empowerment And Sports Tender

ITEM4 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregatess Vol 1 SR 2023-24 Sl No 2.1.3

ITEM5 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Vol 1 SR 2023-24 SL NO 2.4.3

ITEM6 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Vol 1 SR 2023-24 SL NO 2.11

ITEM7 - Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specifications

ITEM8 - Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square I rectangular/ polygon in plan including cost of all materials, labour complete as per specifications.

ITEM9 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Vol 1 PWD SR 2023-24 Sl No 1.9

ITEM10 - KSRB 4-7 : Providing 2 legged scaffolding for stone masonry work using 10-15 cms. dia best quality casurina poles of 4m over all length (3m +0.5m projection + 0.5m In to the ground), the distance between two rows being 1.25m and spacing of posts being 2m in both rows with 2 horizontal posts with 0.5 mm overlap on either side and braces at 2 m c to c including longitudinal and transveres middle braces to step up and providing platform with casurina poles, forms tied up using coir rope complete as per specifications.

ITEM11 - Application 02 Tensile roof cover 96m x 42m wide, height 10m, bay width 8m c to c Providing Tensile Roofing upto 10m ht, truss type with vertical and horizontal member in double column -Which includes Supply, fabrication and erection of MS structure including columns, rafters, purlins, connecting plates, gusset plate, base plate, anchor bolt etc of Primary supporting steel structure will be fabricated from MS Structural steel tubular sections Yield Strength 210 of make TATA, Apollo, Jindal, Loha or other equivalent with 1 coat Anti-corrosion treatment followed by one coat of priming with Enamel primer followed by two coats of Enamel paint of makes Asian or Berger or ICI. Color code as approved and Patterning, seaming, supply and fixing of PVDF coated polyester Valmex Mehatop FR 900 Type II or Serge Ferrari 902S2 fabric. Both sides PVDF lacquered. Protected against microbial and fungal attack and UV Protected and accessories. Supply and fixing of Aluminum extrusions for clamping fabric to surface of steel structure with bolts for fixing, bitumen or silicon washers to ensure water tightness. Supply and fixing of Galvanized accessories which includes Cables, End plates, Sockets, Tensioners and Hardware. Analysis and Design of membrane, erection and tensioning inclusive of all taxes with all leads and lift and as per the direction of Engineer In charge

ITEM12 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Vol 2 SR 2023-24 SL NO 11.16.2

ITEM13 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry at 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.

ITEM14 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Vol 2 SR 2023-24 SL NO 6.32

ITEM15 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Vol 2 SR 2023-24 SL NO 8.2.1

ITEM16 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67L/10 Sqm over and including priming coat of exterior primer applied at 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol 2 SR 2023-24 SL NO 8.30