Department Of Youth Empowerment And Sports Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Department Of Youth Empowerment And Sports - DYES Tender
Opening Date23 Jan 2025
Closing Date7 Feb 2025
Tender Amount₹ 84,72,600.99
Costs
EMD
₹ 1,69,452Document Cost
Refer DocumentsTender Fee
₹ 2,120
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DYES/2024-25/OW/WORK_INDENT53Tender No
DYES/2024-25/OW/WORK_INDENT53Tender Authority
Department Of Youth Empowerment And Sports ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
ITEM0004 - Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin- charge.(pg 188,I no 19.12.2, vol 2, SR 2023-24)
253.2
288
72972.24
... More
ITEM0005 - Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboardS(P.No- 207 I No-20.104 at Vol 2 PWD SR 2023-2024)
253.2
1072
271557
... More
ITEM0006 - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 Sqm over an under coat of primer applied @0.75 L/10 Sqm of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(P.No- 46 I No-8.33.2 at Vol 2 PWD SR 2023-2024)
506.4
151
76871.52
... More
ITEM0007 - Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per specifications.(pg 203,I no 20.50, vol 2, SR 2023-24)
5151.605
14
73667.9515
... More
ITEM0008 - Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 Sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. (For Roof and Water Tanks)(pg 201,I no 20.38, vol 2, SR 2023-24)
1803.0617
569
1027384.55666
... More
ITEM0009 - Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of(pg 46,I no 8.31, vol 2, SR 2023-24)
5151.605
195
1008684.259
... More
ITEM0010 - Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of (P.No- 213, I No- 21.2 at Vol 2 PWD SR 2023-24)
4132.8
334
1382008.32
... More
ITEM0011 - Dismantling chairs (MR)
658
185
121730
... More
ITEM0012 - Supply and fixing chairs - Steps mounted chair- Fiber Shell seat with backrest is mounted to the metal bracket. Shell seat is fixed on metal bracket and then bracket is mounted to the step. Backrest is strengthened to prevent to be broken with vandalism. Approved color with highest light-fastness color pigments to prevent color fade. Seat shaped for comfort, for both the back and legs. Shiny surface prevent dirt from accumulating inside the seats. Easy to clean .Front design does not allow the seat to be pulled off. These are for outdoor stadium.
658
2500
1645000
... More
ITEM0013 - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2, having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification.(P.No- 149, I No- 15.2 at Vol 2 PWD SR 2023-24)
200
810
162140
... More
ITEM0014 - Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin- charge.(pg 188,I no 19.12.2, vol 2, SR 2023-24)
9.6
288
2766.72
... More
ITEM0015 - Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(P.No- 109, I No- 12.87 at Vol 2 PWD SR 2023-24)
9.6
7206
69178.56
... More
ITEM0016 - Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Premium Class (As per KPWD SR 2023-2024,vol 2, Page No.138, Sl No.14.48)
4
2876
11506
... More
ITEM0017 - Providing and fixing Side operated Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete -Premium Class(As per KPWD SR 2023-2024,vol 2, Page No.140, Sl No. 14.61)
2
8940
17881.6
... More
ITEM0018 - Concealed Conduit System-Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing before concreting the slab .the conduit should be tied to the reinforcement rod s by using binding wires and unused junction boxes and pipes ends should be covered with PVC end enclosures, run with 18 SWG GI fish wire whereever necessary.19/20 mm dia 2 mm thick ( Sl No . 1.2.1,Page No.2, SR 2023-24)
350
72
25410
... More
ITEM0019 - Concealed Conduit System-Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing before concreting the slab .the conduit should be tied to the reinforcement rod s by using binding wires and unused junction boxes and pipes ends should be covered with PVC end enclosures, run with 18 SWG GI fish wire whereever necessary. 25 mm dia 2 mm thick ( Sl No . 1.2.2,Page No.2, SR 2023-24)
600
85
51480
... More
ITEM0020 - Concealed Conduit System-Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing before concreting the slab .the conduit should be tied to the reinforcement rod s by using binding wires and unused junction boxes and pipes ends should be covered with PVC end enclosures, run with 18 SWG GI fish wire whereever necessary. 32 mm dia 2.5 mm thick ( Sl No . 1.2.3,Page No.2, SR 2023-24)
65
113
7364.5
... More
ITEM0021 - Supplying and fixing PVC/metal conduit Deep Junction Box.19/20mm deep junction box ( Sl No.1.5.1,page 2, SR 2023-24)
35
53
1886.5
... More
ITEM0022 - Supplying and fixing PVC/metal conduit Deep Junction Box.25 mm deep Junction box ( Sl No.1.5.2,page 2, SR 2023-24)
35
61
2156
... More
ITEM0023 - Supplying and fixing PVC/metal conduit Deep Junction Box. 32 mm deep Junction box ( Sl No.1.5.3,page 2, SR 2023-24)
35
67
2348.5
... More
ITEM0024 - Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, up to wall surface complete.( Sl No.1.7.1 ,page 3,SR 2023-24)
30
31
957
... More
ITEM0025 - Wiring for lighting/power circuit using one of FRLSPV Cinsulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010.1.5 sqmm ( Sl No.2.3.2,page 5, SR 2023-24)
1800
28
51480
... More
ITEM0026 - Wiring for lighting/power circuit using one of FRLSPV Cinsulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010.2.5 sqmm ( Sl No.2.3.3,page 5, SR 2023-24)
1100
46
50820
... More
ITEM0027 - Wiring for lighting/power circuit using one of FRLSPV Cinsulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010. 4.0 sqmm ( Sl No.2.3.4,page 5, SR 2023-24)
900
69
62370
... More
ITEM0028 - Wiring for lighting/power circuit using one of FRLSPV Cinsulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010. 6 .0sqmm ( Sl No.2.3.5,page 5, SR 2023-24)
560
101
56672
... More
ITEM0029 - Wiring for lighting/power circuit using one of FRLSPV Cinsulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010.16 mm2 (Sl No.2.3.7,page 6,SR 2023-24)
420
349
146916
... More
ITEM0030 - Supplying and fixing of superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of screws bolts nuts etc complete on the existing metal /PVC box.1 to 2 Module(Sl No.3.5.1,page 8, SR 2023-24)
10
150
1507
... More
ITEM0031 - Supplying and fixing of superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of screws bolts nuts etc complete on the existing metal /PVC box.4 module ( Sl No.3.5.3,page 8, SR 2023-24)
2
192
385
... More
ITEM0032 - Supplying and fixing of superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of screws bolts nuts etc complete on the existing metal /PVC box. 6-module ( Sl No.3.5.4,page 8, SR 2023-24)
2
257
514.8
... More
ITEM0033 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 Module ( Sl No.3.5.5,page 8, SR 2023-24)
4
312
1249.6
... More
ITEM0034 - Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way. ( Sl No.3.6.1,page 9, SR 2023-24)
55
112
6171
... More
ITEM0035 - Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket.( Sl No.3.6.3,page 9, PWD Ele SR 2023-24 )
30
188
5643
... More
ITEM0036 - Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module ( Sl No.3.6.4 ,page 9,SR 2023-24)
3
392
1178.1
... More
ITEM0037 - upplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch.( Sl No.3.6.7,page 9, SR 2023-24)
8
198
1584
... More
ITEM0038 - Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.32Amps DP switch .( Sl No..3.6.9,page 9, SR 2023-24)
8
358
2868.8
... More
ITEM0039 - Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket. ( Sl No.3.6.10,page 9, SR 2023-24)
12
259
3115.2
... More
ITEM0040 - Supplying & Fixing of 70-150 W lamp holder 2 Pin.(Sl No.12.46 ,page 52,SR 2023-24)
25
69
1732.5
... More
ITEM0041 - Supplying fixing and wiring earth electrode for groundingof lifts,transformers,DG sets etc.using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in aCC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber.The connection from the electrode is to be established through GI strip using GI bolts and nuts.600 x 600 x 3 mm Copper plate(Sl no 12.58.11 ,page 55,SR 2023-24)
1
8163
8163.1
... More
ITEM0042 - Supplying fixing and wiring earth electrode for groundingof lifts,transformers,DG sets etc.using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in aCC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber.The connection from the electrode is to be established through GI strip using GI bolts and nuts.25 x 3 mm GI strip(Sl no 12.58.2 ,page 54,SR 2023-24)
20
90
1804
... More
ITEM0043 - Earthing Chambers ( Market Rate )
2
1320
2640
... More
ITEM0044 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.6-32Amps SP (Sl No.5.18.1,page 17, SR 2023-24)
20
456
9130
... More
ITEM0045 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.6-32 Amps DP ( Sl No.5.18.4,page 17, SR 2023-24)
6
812
4877.4
... More
ITEM0046 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.50-63Amps TPN (Sl No.5.18.9,page 18, SR 2023-24)
6
3396
20380.8
... More
ITEM0047 - Supplying and fixing regular MCB distribution boards on wall/wood board/ flush mounting using required clamps, bolts, nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.12 Way TP & N (Sl No.5.19.14, page 18,SR 2023-24)
1
9608
9608.5
... More
ITEM0048 - Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (Sl No.5.27,page 19, SR 2023-24)
1
220
220
... More
ITEM0049 - Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. (Sl No.5.28,page 19, SR 2023-24)
1
176
176
... More
ITEM0050 - Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. (Sl No.5.29 ,page 19,SR 2023-24)
1
1567
1567.5
... More
ITEM0051 - Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.(Sl No.5.33 ,page 19, SR 2023-24)
1
10246
10246.5
... More
ITEM0052 - Supplying ......... amps rated 3 phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete. 100Amps 4x30X6mm Alluminium Strips .( Sl No.5.40.1,page 20, SR 2023-24)
10
2711
27115
... More
ITEM0053 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm ( Sl No.5.41.2,page 20, SR 2023-24)
12
434
5214
... More
ITEM0054 - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.16SWG ( Sl No.5.42.2,page 20, SR 2023-24)
120000
-
56400
... More
ITEM0055 - Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 200Amps .( Sl No.5.12.4,page 15, SR 2023-24)
1
16773
16773.9
... More
ITEM0056 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators,handle and wiring complete.Protection of Over load and Short circuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC 60947-2.(Icu=100%lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/OverLoad. For Micro processor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB.MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE MCCB -125Amps 25kA .(Sl No.5.15.10,page 17, SR 2023-24)
4
11375
45500.4
... More
ITEM0057 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators,handle and wiring complete.Protection of Over load and Short circuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC 60947-2.(Icu=100%lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/OverLoad. For Micro processor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB.MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE MCCB 200 A 36 kA. (Sl No.5.15.14,page 17, SR 2023-24)
1
23566
23566.4
... More
ITEM0058 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. ( Sl No.5.21,page 18, SR 2023-24)
1
10180
10180.5
... More
ITEM0059 - Supply and fixing of shunt trip for MCCB CBCT . (Sl No.5.16,page 17, SR 2023-24
3
1873
5619.9
... More
ITEM0060 - Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm) (Sl No.6.2.1,page 30, SR 2023-24)
2
3265
6531.8
... More
ITEM0061 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system and as per technical data approved.48" Sweep (1200mm)Regular model ( Sl No.6.3.1 ,page 30,SR 2023-24)
2
3282
6564.8
... More
ITEM0062 - Supplying wall mounting fan suitable to operate at single-phase 230v A.C. supply.300mm Sweep.(Sl No.6.5.1 ,page 30,SR 2023-24)
3
2741
8223.6
... More
ITEM0063 - Supplying & Fixing of PVC batten intergrated LED Tube with high quality diffuser 70% lumen along with CE approved . 2 years of warranty with standard electrical conditions . 1x 4' tube light fitting. (Sl No.11.14.2 ,page 47,SR 2023-24)
55
397
21840.5
... More
ITEM0064 - Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressurede cast/extruded aluminium housing, with spring loaded false ceiling clamps ,Power LEDs with CCT 6500 degree K,CRI greater than70%. efficacy greater than100 lumen per W,120 degree beam spread, life greater than25000 burning hours and Compliance to IS10322/IEC60598, LM79&LM80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LED saredriven by HF electronic driver integrated in a separate control gear assembly., with PF greater than0.95, power loss shouldlesser than5%of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%,Life as per LM79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2'x2' 36 W(Sl No.11.6.3,page 45, SR 2023-24)
4
5008
20033.2
... More
ITEM0065 - Supply round / square recess/surface rolling type LED down light with 15 -18 watt rib fabricated die cast aluminium with white powder coated prewired mains connectors along with CE approved 2 years warranty under standard electrical conditions. LED square or round down light 15-18W ( Sl No.11.5.3,page 44, SR 2023-24)
10
1456
14564
... More
ITEM0066 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole /wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (Sl No.13.5,page 56, SR 2023-24)
69
178
12295.8
... More
ITEM0067 - Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ( Sl No.13.11,page 57, SR 2023-24)
6
346
2079
... More
ITEM0068 - Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. (Sl No.13.13,page 57, SR 2023-24)
2
777
1555.4
... More
ITEM0069 - Supply of LED STREET Light luminaire with pressure die cast aluminium housing body for optimal dissipation Lamp compartment comprising of anti glare clear diffuser with junction moulded polycarbonate/clear glass material, delivaring superior light output.Compatible for pole mounting with outer dia of 40 mm to 50 mm.Warranty of 2 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. 90 WATTS (Sl No.11.8.4,page 46, SR 2023-24)
1
9746
9746
... More
ITEM0070 - Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts ,nuts and wiring using suitable capacity wires. Using 32mm dia G.I.Pipe(Sl No.13.2.2,page 56, SR 2023-24)
2
1424
2849
... More
ITEM0071 - Supply and fixing of speaker (MR)
4
82500
330000
... More
ITEM0072 - Supplying & Drawing of CAT 6E LAN cable (Sl No.8.1,page 36, SR 2023-24)
700
41
29260
... More
ITEM0073 - Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.3 kVA ON LINE UPS.(Sl No.9.3.2,page 38, SR 2023-24)
1
42590
42590.9
... More
ITEM0074 - Supplying, installation, testing & commissioning of 12VDC, AH batteries in polypropylene container for U.P.S. Sealed maintenance free batteries.200AH capacity(Sl No.9.5.10,page 39, SR 2023-24)
2
22734
45469.6
... More
ITEM0075 - Supply and fixing of trolley (MR)
1
1550
1550
... More
ITEM0076 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (Sl No.5.38,pg no 19,SR 2023-24)
8
566
4532
... More
ITEM0077 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators,handle and wiring complete.Protection of Over load and Short circuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC 60947-2.(Icu=100%lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/OverLoad. For Micro processor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB.MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE MCCB - 125 A 25 kA .(Sl No.5.15.10,page 17, SR 2023-24)
5
11375
56875.5
... More
ITEM0078 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators,handle and wiring complete.Protection of Over load and Short circuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC 60947-2.(Icu=100%lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/OverLoad. For Micro processor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB.MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE MCCB - 125 A 25 kA .(Sl No.5.15.10,page 17, SR 2023-24)
4
14791
59166.8
... More
ITEM0079 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators,handle and wiring complete.Protection of Over load and Short circuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC 60947-2.(Icu=100%lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/OverLoad. For Micro processor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB.MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE MCCB - 250 A 25 kA .(Sl No.5.15.13,page 17, SR 2023-24)
1
23530
23530.1
... More
ITEM0080 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators,handle and wiring complete.Protection of Over load and Short circuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC 60947-2.(Icu=100%lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/OverLoad. For Micro processor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB.MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE MCCB - 400 A 36 kA .(Sl No.5.15.16,page 17, SR 2023-24)
1
31037
31037.6
... More
ITEM0081 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC60898.50-63 A TPN(Sl No.5.18.9,page 18,SR 2023-24)
4
3396
13587.2
... More
ITEM0082 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC60898.50-63 A SP(Sl No.5.18.3,page 17, SR 2023-24)
10
892
8921
... More
ITEM0083 - Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 400 A .( Sl No.5.12.6,page 15, SR 2023-24)
1
36236
36236.2
... More
ITEM0084 - Supplying ......... amps rated 3 phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete. 250 A 4 x 30 x 10 mm Aluminium Strips( Sl No.5.40.2,page 20, SR 2023-24)
19
3778
71791.5
... More
ITEM0085 - Supplying ......... amps rated 3 phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete. 400 A 4 x 50 x 10 mm Aluminium Strips( Sl No.5.40.3,page 20, SR 2023-24)
15
4889
73342.5
... More
ITEM0086 - Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (Sl No.5.27,page 19, SR 2023-24)
1
220
220
... More
ITEM0087 - Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. (Sl No.5.28,page 19, SR 2023-24)
1
176
176
... More
ITEM0088 - Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. (Sl No.5.29 ,page 19,SR 2023-24)
1
1567
1567.5
... More
ITEM0089 - upplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.(Sl No.5.33 ,page 19, SR 2023-24)
1
10246
10246.5
... More
ITEM0090 - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.16SWG ( Sl No.5.42.2,page 20, SR 2023-24)
161840
-
76064.8
... More
ITEM0091 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm ( Sl No.5.41.2,page 20, SR 2023-24)
9.6
434
4171.2
... More
ITEM0092 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.185 Sqmm, 3.5 Core, (28 GI Strips - 4 x 0.8 mm) ( Sl No.32.17,page 13, SR 2023-24)
0.02
760339
15206.796
... More
ITEM0093 - Wiring for lighting/power circuit using one of FRLSPV Cinsulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010.1.5 sqmm ( Sl No.2.3.2,page 5, SR 2023-24)
185
28
5291
... More
ITEM0094 - Wiring for lighting/power circuit using one of FRLSPV Cinsulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010.2.5 sqmm ( Sl No.2.3.3,page 5, SR 2023-24)
180
46
8316
... More
ITEM0095 - Wiring for lighting/power circuit using one of FRLSPV Cinsulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010. 4.0 sqmm ( Sl No.2.3.4,page 5, SR 2023-24)
250
69
17325
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%