Department Of Archaeology Museum And Heritage Tender

code04 - d) 6 Way

code05 - e) 8 Way

code06 - f) 10-12 Way

code07 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.

code08 - d) 6 Module

code09 - e) 8 Module

code10 - f) 10-12 Module

code11 - Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore 5.40mm thick@ 14.40 Kg/m,150mm Nominal bore, 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41- Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, usage charges of machinery complete as per specifications. Galvanized Iron Pipes 50 mm dia.

code12 - Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.

code13 - b) LED modular down light 2'x2' 36 W

code14 - Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition

code15 - b) LED square or round down light 15-18W

code16 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency 1301m/w, nominal CRI75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree / Nichia / Lumileds/ Osrammake LED Source. LED Floodlight 100W

code17 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree / Nichia / Lumileds/ Osrammake LED Source. LED Floodlight 50W

code18 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

code19 - Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.

code20 - Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube. Split

code21 - Refilling of existing Fire Extinguisher for ABC Powder based MAP 90,9Kg.The refilling rate shall include cost of all lead and lifts,transportation, loading, unloading, fixing and all other incidental charges etc.complete as per specification and directions of the engineer in charge of the work.

code22 - Supplying & fixing relay for over load protection for window and split air conditioners.

code23 - Supplying & filling refrigerant (F-22/F/12) for air conditioning equipment's. Which includes the labour & Nitrogen gas for pressure and leak testing.

code24 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front coveropen). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. THREE Pole 250 A 36 kA

code25 - Supplying and fixing capacitor's (of approved make) for window /split air conditioners. 25 to 45mfd running capacitor.

code26 - Supplying and fixing of fan blade

code27 - Auditorium Interior Electrical works are Amplfier, Overhead Projector, Screen & Other Audio Eqipments- Supplying and Fixing of POWERamp AHUJA 1.5 K ,including cost of Materilas, Labours etc.complete.( Market Rate)

code28 - Supplying and Fixing of Ahuja sub woofer PMP Act x1 ,including cost of Materilas, Labours etc.complete.( Market Rate)

code29 - Supplying and Fixing ofCollar MIC Man XR 2PP Wireless ,including cost of Materilas, Labours etc.complete.( Market Rate)

code30 - Supplying and Fixing of Podiym XR 2PP Wireless ,including cost of Materilas, Labours etc.complete.( Market Rate)

code31 - Supplying and Fixing ofChordless MI"C pair Double Antenna ,including cost of Materilas, Labours etc.complete.( Market Rate)

code32 - Supplying and Fixing of 4-U Rack for Amplifer with Lock ,including cost of Materilas, Labours etc.complete.( Market Rate)

code33 - Supplying and Fixing of Epson projector lumens ,including cost of Materilas, Labours etc.complete.( Market Rate)

code34 - Supplying and Fixing of Target 8/10 Motorised Screen 06 Nonthly warranty ,including cost of Materilas, Labours etc.complete.( Market Rate)

code35 - Supplying and Fixing of 2 Pair cable (90 mtrs coil) ,including cost of Materilas, Labours etc.complete.( Market Rate)

code36 - Supplying and Fixing of Control panel unit set Mix ,including cost of Materilas, Labours etc.complete.( Market Rate)

code37 - Supplying and Fixing of AHUJA/Studio Master Mixer ,including cost of Materilas, Labours etc.complete.( Market Rate)

code38 - Supplying and Fixing of Supplying and Fixing of Corner Speakers VX High Bos AHUJJA 300 Watts ,including cost of Materilas, Labours etc.complete.( Market Rate)

code39 - Supplying and Fixing of STA Speakers Box Stand HQ ,including cost of Materilas, Labours etc.complete.( Market Rate)

code40 - Supplying and Fixing of Collar mic sensor Transformer and receiver ,including cost of Materilas, Labours etc.complete.( Market Rate)

code41 - Supplying and Fixing of AUDIO 3ACK PLUG N Play Audio ,including cost of Materilas, Labours etc.complete.( Market Rate)

code42 - Supplying and Fixing of Power AMP 7000Watts AHUJJA ,including cost of Materilas, Labours etc.complete.( Market Rate)