Department Of Archaeology Museum And Heritage Tender

code04 - KSRRB-M100-4.1- Cost of Haulage Excluding Loading and Unloading MORTH-100/Chapter 1 Case 1Surface road

code05 - KSRB5-8.3 Providing Two line dressing to granite stone slabs/granite stone masonry as per specification KBS 5.1.13

code06 - Resetting of the Basement stone members including conveying from stacked position lifting by using chain and pully block and setting on its position correct line, plumb and level with all lead and lifts, labour charges and hire charges for chaing pully block, steel rope, etc., as per the direction of engineer incharge of work . SL No 50

code07 - Cleaning the sand stone surface and removing dirt, dust, bird dropping,grease, oil, algae, fungus, monkey beats, vegetable growth etc.,including providing, applying and washing the surface with liquidAmmonia Chemical of 5% solution and other chemical cleaning agentas approved by Archaeological Survey of India/ Engineer-in-charge,of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixedwith desired quantity of fine silica where ever required, without causingany scratching/ damage to the stone surface and finally washing thesurface with clean water with the help of pressure jet machine, completein all respect, including taking all precautions to safeguard ventilators,windows, doors etc. by suitable covering so as to avoid any damage tothe building/ structure, all as per direction of Engineer-in-charge.The rate is inclusive of all materials & labours involved except scaffolding.

code08 - Providing and erecting 4 legged jack steel pipecentering ith necessary platform for working with suitable height the bracing are to be properly tied with same section of pipe both horizontally,longitudinal and diagonaly with safety belt for safety measures of the labours and for conveying and construction of material charges including transportation and cleaning the site after completion of work to the maximum ht of 6mtr etc., complete as per the direction of the icharge of work . SL No 82

code09 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m

code10 - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications.

code11 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 1 cement : 6 coarse sand.

code12 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregate

code13 - Treatment of soil with Chloropyriphos/Lindane E.C. 20% with 1% concentration under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 1 cement : 2 Coarse sand to match the existing floors.

code14 - Providing flush/ruled pointing to square rubble, course oruncoursed stone masonry with cement mortar1:3, 20mm deep, afterraking joints to depth of 20mm nicely lining, including cost of materials,labour, curing complete as per specifications. . SL No 74

code15 - Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge 1.25mm thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 80

code16 - Providing and fixing of typical Citizen Information Board B as per specifications and drawing. Two ACP Sheet of 4mm thick having minimum 0.25mm thick aluminum skin both sides and fixed over a back support of Ms plate of 5mm thick. Supported on frame post of 2 nos of MS Suare hallow section 75mmx75mmx6mm which is duly embedded in cement concrete M20 Grade of 600x600x750mm,600mm below ground level.All MS will be stove enameled on both the sides.All sections of framed posts,MS sheet and Stell tubes will be painted with primer and two coats of epoxy paint as per drawing etc..Retro-Reflective Sheet as per IRC 67 fixted over a two nos of Aluminum composite materialACP sheeting of size 900x750mm of 4mm thick duly bolted/reveted with MS plate of 5mm thick on backside of ACP heet.Including cost and conveyance of all aterials,equipment,machinery and labour with all leads and lifts,loading charges charges necessary for satisfactory completion of work as per directed by engineer incharge. i For warranty and durability the clause 1701.5 and for maintenance the clause 1911 shall be applicable. ii A reference number along with the month and year of installation should be placed on the back of a sign in a contrasting colour or by stamping in characters not exceeding 50 mm in height.485777/2019/DirTech 7 Retro Reflective Trafic Sign As per IRC 67 Clause 1701.3.8.1 Class A Type-1

code17 - Maintainance of Monument including cost of labour etc., complete as per the direction of higher authority.