Department Of Archaeology Museum And Heritage Tender

21.10 - Providing ruled pointing to coursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of machinery, curing complete as per specification.

code14 - KSRRB M1004.1 Cost of Haulage Excluding Loading and Unloading MORTH 100Chapter 1 CaseI Surface Road (PWD SR 2023-24/I NO.1.4(I)d page No.05)

code28 - Resetting of Flooring stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. Data Rate- Sl.NO.SE/PWD/MC/AE-01/data rate/2019-20/6615/68 dated 18.02.2020

code21 - Resetting of Door Base stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffolding materials and as directed by the engineer in charge of work. Data Rate- Sl.NO.SE/PWD/MC/AE-01/data rate/2019-20/6615/57 dated 18.02.2020

code02 - Numbering and removing Pillar Base Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/06 dated 18.02.2020

1.23 - Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications.

2.1.2 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates

code26 - Resetting of Chejja/Kapota stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. Data Rate- Sl.NO.SE/PWD/MC/AE-01/data rate/2019-20/6615/62 dated 18.02.2020

code18 - Resetting of Pillar stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. SE/PWD/MC/AE-01/data rate/2019-20/6615/54 dated 18.02.2020

code29 - Providing approved M sand to site for laying of flooring slabs etc. complete as per direction of engineer in charge of work (PWD SR 2018-19 SL.NO.49 PAGE NO.02)

code17 - Resetting of Pillar Base stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. SE/PWD/MC/AE-01/data rate/2019-20/6615/53 dated 18.02.2020

code31 - Providing lime concrete terracing on roofing for weather proof course average thickness 100mm laid to slope with 25mm nominal size brick jelly and 50 lime surkhi mortar 12 one lime putty two surkhi rammed and finished with gur and Belgiri treatment rounding off junctions with parapets including cost of materials labour complete as per specifications Data Rate- Sl.NO.SE/PWD/MC/AE-01/data rate/2019-20/6615/73 dated 18.02.2020

6.8 - Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.

code30 - Removing debris such as brick bats , concrete, earth wastage material etc behind 5km outside the monument through vehicle including hire charges of vehicle, crew charges ,labour charges for loading &unloading etc complete as directed by higher authorities Data Rate- Sl.NO.SE/PWD/MC/AE-01/data rate/2019-20/6615/75 dated 18.02.2020

code09 - Numbering and removing Veener Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/03 dated 18.02.2020

19.7.3 - Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. - In cement mortar

code10 - Numbering and removing Ceiling Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/14 dated 18.02.2020

code22 - Resetting of Door jams stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. Data Rate- Sl.NO.SE/PWD/MC/AE-01/data rate/2019-20/6615/58 dated 18.02.2020

code20 - Resetting of beams stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. SE/PWD/MC/AE-01/data rate/2019-20/6615/60 dated 18.02.2020

code25 - Resetting of Veener stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. Data Rate- Sl.NO.SE/PWD/MC/AE-01/data rate/2019-20/6615/50 dated 18.02.2020

code12 - Numbering and removing Teeerthnala Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/22 dated 18.02.2020

code07 - Numbering and removing Door Lintle Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/12 dated 18.02.2020

16.33.A - Providing and Fixing Citizen Information Board B - Providing and fixing of typical Citizen Information Board B as per specifications and drawing. Two ACP Sheet of 4mm thick having minimum 0.25mm thick aluminum skin both sides and fixed over a back support of Ms plate of 5mm thick. Supported on frame post of 2 nos of MS Suare hallow section 75mmx75mmx6mm which is duly embedded in cement concrete M20 Grade of 600x600x750mm,600mm below ground level.All MS will be stove enameled on both the sides.All sections of framed posts,MS sheet and Stell tubes will be painted with primer and two coats of epoxy paint as per drawing etc..Retro-Reflective Sheet as per IRC 67 fixted over a two nos of Aluminum composite material(ACP) sheeting of size 900x750mm of 4mm thick duly bolted/reveted with MS plate of 5mm thick on backside of ACP Sheet.Including cost and conveyance of all materials,equipment,machinery and labour with all leads and lifts,loading charges charges necessary for satisfactory completion of work as per directed by engineer incharge. (i) For warranty and durability the clause 1701.5 and for maintenance the clause 1911 shall be applicable. (ii) A reference number along with the month and year of installation should be placed on the back of a sign in a contrasting colour or by stamping in characters not exceeding 50 mm in height.485777/2019/Dir(Tech) 7 - Retro Reflective Trafic Sign As per IRC 67 Clause 1701.3.8.1 Class A Type-1. Ref to MoRT&H : IRC - 1701

code19 - Resetting of Pillar Capitals stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. SE/PWD/MC/AE-01/data rate/2019-20/6615/56 dated 18.02.2020

code11 - Numbering and removing Flooring Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/21 dated 18.02.2020

19.22.1 - Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25 mm

code01 - Numbering and removing Adhistana Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/01 dated 18.02.2020

code04 - Numbering and removing Pillar Capitals Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc. complete as per the directions of the Engineer in charge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/08 dated 18.02.2020

code06 - Numbering and removing Door Jams Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/11 dated 18.02.2020

5.1.1 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

code24 - Resetting of Ceiling stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. Data Rate- Sl.NO.SE/PWD/MC/AE-01/data rate/2019-20/6615/61 dated 18.02.2020

code03 - Numbering and removing Pillar Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/07 dated 18.02.2020

7.16 - Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

1.4.2 - Manual Means - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m

8.54 - Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804. Ref to MoRT&H : IRC - MoRTH 804

code15 - Providing three-line dressing to granite stone slab granite stone masonry as per specification (PWD SR 2018-19, I NO.5.19 PAGE-27)

code13 - Supplying of Solid granite stone all sizes of from Doddaballapura /Chikkaballapura quarry to work spot with all lead and lift and labour charges including hiring charges for chain and pulley block transportation etc. complete as directed by Engineerincharge of work Data rate SE/PWD/MC/AE-01/data rate/2019-20/6899-900/ dated 06.03.2020

code23 - Resetting of Door Lintels stone members including conveying from stocked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead lifts and labour charges including hire charges for chain and pully block etc Complete including hire charges of scaffiloding materials and as directed by the engineer in charge of work. Data Rate- Sl.NO.SE/PWD/MC/AE-01/data rate/2019-20/6615/59 dated 18.02.2020

code05 - Numbering and removing Door Base Stone the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials labour charges etc complete as per the directions of the Engineer incharge of the Work Only length of stone should be measured Data Rate SE/PWD/MC/AE-01/data rate/2019-20/6615/10 dated 18.02.2020

19.61 - Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge.