Department Of Archaeology Museum And Heritage Tender

code04 - Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio.mixing and spreadingthe mixture to 7.50cm thickness wherever requiredM Red soil 0.0075m3 Farm Yard manure 0.0225m3 Sand 0.045m3

code05 - procurement of quality red earth/soil and heap around pit (1x1x0.15mt)

code06 - mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers,digging,levelling , and dibbling with lawn grass a tas pacing of 5cmx5cm & as per the direction of the Officer in charge of the work. Bermuda Grass Dibbling

code07 - WORK TO BE UNDER TAKEN DURING MAINTENANCE:- Watering : The plants and lawns in the garden should be watered frequently as required looking to the climate, soil and plant conditions: If sprinklers are made available, it can be used other wise hose pipe can be used for watering, problems regarding pipe line damage during watering/maintenance should be repaired and taken care. Weeding : Weeding has to be done regularly in the entire garden area including extra weed growth in the pathways and other remaining areas in the park. Weeding should be done regularly once in a fortnight and the weeds collected should be used for preparing manure or it should be disposed from the garden appropriately. Sweeping : Sweeping of the garden area has to be done daily. The pathways, entire garden area should be swept and kept free of fallen leanves, branches, flowers, dust etc., and should be made use for the public. Dust bins in the garden area should be emptied and disposed properly and regularly. Any dead rodent, pets or animals are founds should be removed immediately and the garden spaces should be free from foul smell. Gazeboo, Chairs and Other Adomments should be cleaned daily.Maintenance of Shrubs, Edges, Ground cover and other area by regular pruning, digging so as to maintain the garden aesthetically.Lawn moving shloud be done regularly every fortnight. Digging of soil around plants in the garden, should be carried out. Soil basins should be prepared around the hedges/ edges/ trees/ shrubs/ ground covers by digging the soil so as to maintain retention of water. This should be done before and after monsoon. Pruning of plants in the garden, such as the Hedges, Trees, Shrubs, Ground cover plants, Topiary plants, Rose plants etc., should be carried out as and when required and as per the directions of officer in-charge of work.Transportation of plastic and other materials should be removed from the garden, must be taken care. The swept leaf materials only should be used for preparation of compost manure in the garden itself and the compost manure should be used in the garden. All dead plants, branches and other waste matirials should be removed regularly and transported outside the garden. in the garden area dried leaves and other waste materials should be regularly removed from the garden at the risk of contractors for 2years

code08 - Supplying of good quality horticulture manure and pesticides for maintenance of existing garden plots, flower pots and other plants and plant pots etc., complete as per the directions of higher authorities. urea

code09 - complex mannur

code10 - rose mix

code11 - neem cake

code12 - pesticide

code13 - Providing and fixing of typical Maintenance information board as per specifications and drawing. ACP Sheet of 3 mm thick having minimum 0.25mm thick aluminum skin both sides and fixed over a back support of Ms plate of 5mm thick. Supported on frame post of 2 no's of MS Square hallow section 5mmx75mmx6mm which is duly embedded in cement concrete M20 Grade of 600x600x750mm,600mm below ground level.All MS will be stove enameled on both the sides. All sections of framed posts, MS sheet and stell paint as per drawing etc..Retro-Reflective Sheet as per IRC 67 fixted over a Aluminum composite material(ACP) sheeting of size 900x1500mm of 3mm thick duly bolted/reveted with MS plate of 5mm thick on backside of ACP Sheet.Including cost and conveyance of all materials,equipment,machinery and labour with all leads and lifts,loading charges charges necessary for satisfactory completion of work as per directed by engineer incharge. (i) For warranty and durability the clause 1701.5 and for maintenance the clause 1911 shall be applicable. (ii) A reference number along with the month and year of installation should be placed on the back of a sign in a contrasting colour or by stamping in characters not exceeding 50 mm in height.485777/2019/Dir(Tech) 7 Retro Reflective Trafic Sign As per IRC 67 Clause 1701.3.8.1 Class A Type-1.

code14 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes.

code15 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes.

code16 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on 25 mm nominal dia Pipes.

code17 - Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

code18 - Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.20 mm nominal bore, weighing not less 40ng

code19 - Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g

code20 - Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 20 mm nominal bore, 120 mm long, weighing not less than 198 g

code21 - Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore

code22 - Providing and fixing of V Guard 1 HP Single Phase self Priming Centrifugal water pump V FILL SF 01, Electrical wiring, Motor fixing foot valve assembly transportation labour charges etc., complete

code23 - Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. ( 2/1.1)

code24 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, COPPER conductor flexible multicore FR PVC insulated, extruded FR PVC outer sheathed 2C X1.5Sq.mm Cable confirming to the GTP of page no.with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. ( 5/2.1) a) Short point up to 3Mtr from tapping point to out let via switch

code25 - b. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch

code26 - c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch

code27 - Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A. ( 6/2.5) 1 sqmm.

code28 - 2.5 sqmm

code29 - 4 sqmm

code30 - Supplying and surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates. The box should be firmly surface/flush mounted after due groove cutting in Brick/C.C wall, fixing including necessary rawl plugs, Machine/NF screws etc., complete.( 15 /3.4) 4-5Way

code31 - 6-8Way

code32 - 10-12Way

code33 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.( 16 /3.6) 4Moudule

code34 - 8Moudule

code35 - 12Moudule

code36 - Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 ( 16 /3.7) Using Group "A" materials 6Amps one way.

code37 - 6Amps 3way socket.

code38 - Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm

code39 - Providing and fixing reeded glass 3mm thick with teakwood beading of 10mm thick