Department Of Archaeology Museum And Heritage Tender

code04 - Removing and fixing old Mangalore ridge tiles including pointing with C.M. 1:3.

code05 - Dismantling wood work : Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of sectional area 40 square centimeters and above

code06 - Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer in-charge. Of area beyond 3 m²

code07 - Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges ofmachinery, curing, and all the other appurtenances required to complete thework as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates

code08 - Providing and constructing laterite size stone masonry including costand conveyance of all materials curing etc complete as per specificationI.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM 1:6

code09 - Providing Mathi / Nandi wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications.

code10 - Preparing and fixing of wooden member including d=cost of labour, conveyance chargesetc., complete as per the direction of engineer incharge of work Corpentor class I

code11 - Corpentor class II

code12 - Providing Laterite stone work in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (Non SR rate)

code13 - plaster CM 1:4 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

code14 - Interior painting work :Finishing with Deluxe Multi surface paint system for interiors and exteriorsusing Primer as per manufacturers specifications: Two coats applied onwalls @ 1.25 L/10 m² over and including one coat of Special primer applied@ 0.75 L/10 m² with paint of approved quality to give an even shade, afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and as perdirections of Engineer-in-charge. (The gloss should be 50% @ 60 degreeangle with 10 years life)

code15 - flooring tandur blue stone :Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.

code16 - primer for wood work : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code17 - wood work enamel paint: Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge

code18 - Providing and fixing 0.08mm thick G.I coated sheet for sloped roof level to line and level over existing wooden truss and beams and planks with nails and screws nails as per the requirement to site condition including cost of labour for errection and fixing cost of materials etc complete. (data rate)

code19 - Supplying and fixing new Mangalore tiles on existing reepers.

code20 - Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge

code21 - Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing

code22 - Direction and Place Identification Signs with size more than 0.9 m2 size Board.: Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area exceeding 0.9 m2 fixed over back support frame of min 40 x 40 x 5mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing

code23 - Providing and fixing of vitreous Enamel boards: Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work- In all kinds of soils Depth upto 3 m

code24 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates

code25 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

code26 - Supplying of solid granite stone of all size from gulur, chikaballapur district quarry to work spot with all lead and lift and labour charges including hiring charges for chain and pully block transportation etc, complete as directed by Engineer incharge of work.

code27 - Providing Dressing to stone members four line dressing for face and two line dressing to have fine joints as per existing old styles and as per the direction by the Higher Authorities. (Quoatation rate)

code28 - Resetting of pillar stone members of all size including conveying from stacked position lifting by using chain and pully block and setting on its position correct line, plumb and level with all lead, lifts, labour charges including hire charges for chain pully block etc complete including hire charges of scaffolding materials and as directed by Engineer in charge of work.

code29 - Providing and preparing VETREOUS ENAMEL (All wearhwe proof) porcelain base ceramic coated (baked under 800 to 850c temp) guage CRCA mild steel and enamalled in white background and RED BROWN letters or blue bakground and WHITE LETTERS with specified matter in KANNADA & English with LOG's as per your approved text, shown in the enclosed colour drawing. including fitted with anti corrosive STAINLESS STEEL screws with SUPPORTING STAND (PILLAR) OF STONE OF size 10" width x 8" thcik x 84" height of per board as shown in the enclosed Drawing. the stone frame and supporting stand fitted with stainless steel nuts, bolts & washers including fixing at VARIOUS SITES (Arround the 100km radius (Approved Rate)