Department Of Archaeology Museum And Heritage Tender

code04 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

code05 - Providing Coursed Rubble masonry(first sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

code06 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

code07 - Supplying of solid granite stone of all sizes from Gulur,Chikaballapura Dist.quarry to main road with 10km lead and labour charges including hiring charges for chain and pully block trasportation etc.. Complete as directed by Engineer -in-charge of work.

code08 - Cost of Haulage excluding Loading & Unloading case surfaced Road

code09 - KSRB 5-8.3 : Providing three line dressing to granite stone slab Igranite stone masonry as per specifications. KBS 5.1.13

code10 - Resetting of Adisthana stone members of all sizes including conveying from stackedposition lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead, lifts and labour charges including hire charges for chian and pully block etc., complete including hire charges of scaffolding materials and including all lead & lifts complete as per the direction of engineer incharge of work.

code11 - Resetting of pillar base members of all sizes including conveying from stackedposition lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead, lifts and labour charges including hire charges for chian and pully block etc., complete including hire charges of scaffolding materials and including all lead & lifts complete as per the direction of engineer incharge of work.

code12 - Resetting of pillar members of all sizes including conveying from stackedposition lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead, lifts and labour charges including hire charges for chian and pully block etc., complete including hire charges of scaffolding materials and including all lead & lifts complete as per the direction of engineer incharge of work.

code13 - Resetting of capital stone members of all sizes including conveying from stackedposition lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead, lifts and labour charges including hire charges for chian and pully block etc., complete including hire charges of scaffolding materials and including all lead & lifts complete as per the direction of engineer incharge of work.

code14 - Resetting of Door base members of all sizes including conveying from stackedposition lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead, lifts and labour charges including hire charges for chian and pully block etc., complete including hire charges of scaffolding materials and as directed by the engineer in charge of work.

code15 - Resetting of Beams members of all sizes including conveying from stacked position lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead, lifts and labour charges including hire charges for chian and pully block etc., complete including hire charges of scaffolding materials andincluding all lead & lifts complete as per the direction of engineer incharge of work.

code16 - Resetting of ceiling slab members of all sizes including conveying from stackedposition lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead, lifts and labour charges including hire charges for chian and pully block etc., complete including hire charges of scaffolding materials and including all lead & lifts complete as per the direction of engineer incharge of work.

code17 - Resetting of Flooring stone members of all sizes including conveying from stackedposition lifting by chain and pully blocks and setting on its proper position to correct line and plumb and level with all lead, lifts and labour charges including hire charges for chian and pully block etc., complete including hire charges of scaffolding materials and as directed by the engineer in charge of work.

code18 - Providing approved M-Sand to site for laying of flooring slabs etc complete as per direction of Engineer in charge of work SR 18-19 SL No 49 code no 0334 page no 2

code19 - Providing Ruled Pointing to coursed stone masonry withlime mortar 1:3, 20mmdeep after raking joints to depth of 20mm nicely lining including cost of materials ,labour , curing, complete as per specification

code20 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregate

code21 - Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

code22 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

code23 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.

code24 - Maintenance of Monument for one year Unskilled (Light Work) pg-A-50 S.L No 1V

code25 - Providing and fixing of typical 'Citizen Information Board B" as per specifications and drawing. Two ACP Sheet of 4mm thick having minimum 0.25mm thick aluminum skinboth sides and fixed over a back support of Ms plate of 5mmthick. Supported on frame post of 2 no's of MS Suare hallowsection 75mmx75mmx6mm which is duly embedded incement concrete M20 Grade of 600x600x750mm,600mmbelow ground level.All MS will be stove enameled onboth the sides.All sections of framed posts,MS sheet andStell tubes will be painted with primer and two coats ofepoxy paint as per drawing etc..Retro-Reflective Sheet asper IRC 67 fixted over a two no's of Aluminum compositematerial(ACP) sheeting of size 900x750mm of 4mmthick duly bolted/reveted with MS plate of 5mm thick onbackside of ACPSheet.Including cost and conveyance of materials, equipment,machinery and labour with all leadsand lifts,loading charges charges necessary for satisfactorycompletion of work as per directed by engineer incharge. (i) For warranty and durability the clause 1701.5 and formaintenance the clause 1911 shall be applicable.(ii) A reference number along with the month and yearof installation should be placed on the back of a sign ina contrasting colour or by stamping in characters notexceeding 50 mm in height.485777/2019/Dir(Tech) 7 Retro Reflective Trafic Sign as per iRC 67 Clause 1701.3.8.1 Class A type-1

code26 - Providing and fixing board displaying information, suchas 'Name of work, Tender cost, Name of Contractor, Workcompletion and liability period etc', having rectangular shapeof 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stovingprimer and two coats of enamel paint on front side and greystove enamel on back side and border / messages / symbolsetc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S.angles of size 35mmx35mmx3mm duly painted including TwoM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 mlong painted with alternate black and white bands of 25 cm widthincluding all fixtures etc.and fixing the boards in 1:4:8 concreteblock of size 60 cm x 60 cm x 75 cm including, excavation,refilling, transportation, and labour etc complete. Spec. No. Asdirected by Engineer in Charge & MoRTH specification 804