Department Of Archaeology Museum And Heritage Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Department Of Archaeology Museum And Heritage Tender
Paints and Enamels
Opening Date24 Jun 2024
Closing Date24 Jul 2024
Tender Amount₹ 6,96,03,937.99
Costs
EMD
₹ 13,95,000Document Cost
Refer DocumentsTender Fee
₹ 5,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DAMH/2024-25/OW/WORK_INDENT71Tender No
DAMH/2024-25/OW/WORK_INDENT71Tender Authority
Department Of Archaeology Museum And Heritage ViewPurchaser Address
-Website
http://kppp.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
code04 - Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge. (I.NO-19.61,P.No-193 vol.2)
39.49
700
27645.7643
code05 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/ Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The water proofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the water proofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (I.NO-15.1,P.No-149 vol.2)
789.74
992
784196.0252
code06 - Removal of old broken glass panels ( any thickness of size, quality or description ) from metal frames, glazed with putty or fixed with beads including cost of labour, complete as per specifications. ( I.NO-20.77,P.No-205, vol.2)
50.88
306
15583.5264
code07 - Providing & fixing glass panels with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge (I.NO-11.30.1,P.No-85, vol.2)
50.88
1108
56397.4272
code08 - Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification. (I.NO 20.88, P.No-206 vol.2)
59.4
484
28805.436
code09 - Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage units, furnitures,electrical & electronic equipments, doors, windows, curtains, blinds etc., including cleaning of dust, etc., using suitable bombay broom stick, squezers (I.NO-20.96, P.No-207)
1646.77
3
6010.7105
code10 - Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture to give an even surface including preparing the surface after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (I.NO-8.48, P.No-49,vol.2)
1867.11
76
142964.6127
code11 - French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.. (I.NO-8.46, P.No-49)
184.46
358
66136.2884
code12 - Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge. (I.NO-20.40, P.No-201, VOL-2)
10
94
948
code13 - Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction m3 jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm. (I.NO-20.41, P.No-201.vol.2)
30
353
10610.4
code14 - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (I)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (II)Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water (III) Chlorination of RCC internal surface by liquid chlorine. (IV)The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (V)Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge
47.25
81
3847.5675
code15 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge. (I.NO-8.64, P.No-51,vol-2)
85.8
92
7925.346
code16 - Providing and fixing reeded glass 3mm thick with teakwood beading of 10mm thick. (I.NO-20.106, P.No-207,vol.2)
57.6
1315
75747.456
code17 - Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar (I.No-19.7.3,P.No-187 vol.2)
9
1250
11255.76
code18 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m. (I.No-1.14,P.No-5 vol.2)
41.91
123
5195.5827
code19 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates. (I.No-2.1.2,P.No-15 vol.1)
5.99
6884
41235.3397
code20 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (I.No-2.2.3,P.No-16 vol.1)
9.55
8316
79425.822
code21 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). (I.No-5.4,P.No-9,vol-2)
16.17
7765
125563.1223
code22 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (I.No-1.9,P.No-9,vol-1)
49.47
323
15993.1563
code23 - Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (I.No-2.2.1,P.No-15,vol-2)
4.47
7641
34156.2087
code24 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (I.No-6.8, P.No-14 vol.2)
15.73
9685
152353.2296
code25 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Plinth Beam) (I.No-2.5.2,P.No-16, vol.1)
2.01
12475
25075.6947
code26 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Beam) (I.No-2.5.2,P.No-16, vol.1)
2.8
13307
37260.048
code27 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. CHEJJA (The cost of Formwork is included)
0.32
11684
3738.96
code28 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Slab) (I.No-2.5.2,P.No-16, vol.1)
1.89
14138
26722.4454
code29 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Slab) (I.No-2.5.2,P.No-16, vol.1)
4.35
12475
54268.2945
code30 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates.
98.19
7556
741937.3866
code31 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (I.No-2.11a,P.No-18,vl-1)
1.787
108726
194293.43348
code32 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners whereverrequired smooth rendering, providing and removing scaffolding, includingcost of materials, labour, curing complete as per pecifications and as perdirections of Engineer-in-charge. (I.No-8.1.1, P.No-41, vol-2)
262.57
309
81378.3201
code33 - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (I.No-12.13.1,P.No-100 vol-2)
0.06
120099
7205.9856
code34 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick one side teak and one side commercial. (I.No-12.57.2,P.No-105 vol-2)
2.88
4245
12226.7232
code35 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (I.No12.51,P.No-104,vol-2)
1
1234
1234.84
code36 - Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size - 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (I.No12.86,P.No-109, vol-2)
8.1
6551
53063.181
code37 - Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (Vol.2 I.NO-8.54.2,1,P.No-50)
128.14
133
17131.0366
code38 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (I.NO-8.30,P.No-46 vol.2)
249.11
211
52681.7828
code39 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (I.No 9.24,P.No-63, vol-2)
31.18
3466
108079.8576
code40 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Handles 200mm
20
546
10938.6
code41 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 200mm
30
364
10938.6
code42 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Tower Bolts 150x10mm
15
145
2187.75
code43 - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 madeof Class B Type IV retro reflective sheeting fixed over 2 mmthick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. ( I.No.8.5,A, ix,page.64, vol-3 2023-24 SR)
8
7930
63443.84
code44 - clearing of land by cutting of thick and sparse growth plants(0.25 mt thickness plants and clearing of bushes along with roots( throwing away to 1.5mtr height and 50 mtr far)
1074.78
8
8813.196
code45 - Growing of Hedges: Digging trench of size 1mx0.30mx0.45m and filling 50% of the trench with top soil and remaining 50% trench with1:2:3 proportion of sand (0.0112), FYM 0.0224cum)red earth (0.0336cum) and planting of well grown plants (excluding cost of plants) (a) Normal soil
154
121
18717.16
code46 - SCRAPPING AND REMOVING TOP SOIL :-Scrapping the area by removing 0.15m soiland removing of unwanted plants,grass along with roots.25km initial transport,including lead, lift loading and unloading charges. (1x1x0.15mt)
161.22
51
8370.5424
code47 - Procurement of quality red earth/soil and heap around pit (1x1x0.15mt)
161.22
87
14184.1356
code48 - Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio.mixing and spreadingthe mixture to 7.50cm thickness wherever required Farm Yard manure
161.22
131
21179.4714
code49 - Procurement of quality lawn grass :(a) Bermuda Grass TURF
1074.78
121
130628.7612
code50 - Labour Charges : mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers,digging, levelling , and dibbling with lawn grass at a spacing of 5cm x5cm & as per the direction of the Officer in charge of the work.
1074.78
68
73514.952
code51 - WORK TO BE UNDER TAKEN DURING MAINTENANCE:- Watering : The plants and lawns in the garden should be watered frequently as required looking to the climate, soil and plant conditions: If sprinklers are made available, it can be used other wise hose pipe can be used for watering, problems regarding pipe line damage during watering/maintenance should be repaired and taken care. Weeding : Weeding has to be done regularly in the entire garden area including extra weed growth in the pathways and other remaining areas in the park. Weeding should be done regularly once in a fortnight and the weeds collected should be used for preparing manure or it should be disposed from the garden appropriately. Sweeping : Sweeping of the garden area has to be done daily. The pathways, entire garden area should be swept and kept free of fallen leanves, branches, flowers, dust etc., and should be made use for the public. Dust bins in the garden area should be emptied and disposed properly and regularly. Any dead rodent, pets or animals are founds should be removed immediately and the garden spaces should be free from foul smell. Gazeboo, Chairs and Other Adomments should be cleaned daily. to maintain retention of water. This should be done before and after monsoon.
Pruning of plants in the garden, such as the Hedges, Trees, Shrubs, Ground cover plants, Topiary plants, Rose plants etc., should be carried out as and when required and as per the directions of officer in-charge of work.
Transportation of plastic and other materials should be removed from the garden, must be taken care. The swept leaf materials only should be used for preparation of compost manure in the garden itself and the compost manure should be used in the garden. All dead plants, branches and other waste matirials should be removed regularly and transported outside the garden. in the garden area dried leaves and other waste materials should be regularly removed from the garden at the risk of contractors.
1074.78
131
141075.6228
code52 - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20 mm dia 2 mm thick
40
80
3208.8
code53 - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 700mm using NF screws . 19/20 mm dia 2 mm thick
15
82
1239.75
code54 - Supplying and fixing of PVC casing and capping on the wall or ceiling
using necessary materials like bends, junction box, elbows, screws at
an interval of 300 mm as required. 20mm
20
34
680.6
code55 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010 . 2.5 mm2
50
51
2552
code56 - Supplying and drawing PVC insulated flexible copper wire of approved make as per IS: 694: 2010 23/0.0040"
50
26
1336.5
code57 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch 6A Two Way Switch
4
201
807.04
code58 - Stepped Fan Regulator Two Module
6
433
2603.34
code59 - 400W Dimmer
4
335
1341.8
code60 - 6/16A Universal Socket
6
286
1720.98
code61 - 32A DP Switch
6
396
2377.32
code62 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 6 Way SP & N
1
2176
2176.78
code63 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model
4
3626
14507
code64 - Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W
8
838
6709.04
code65 - Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified
2
2639
5279.7
code66 - GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip
6
99
597.96
code67 - Fabrication, Supplying, Erection, Testing and Commissioning of ...... Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO / ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/sec as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5sqmm EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/ power tool (Suitable reversible geared motor operating on 230/ 415V, 50Hz, shall be provide above 15 Mtrs mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin lamps fitting with wiring complete. (excluding foundation) as per technical data.
1
237003
237003
code68 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance ofcomplete luminaire greater than IK08. Power Factor greater than 0.9 with mains,Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiencygreater than1301m/w, nominal CRIgreater than75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/
8
18794
150359.6
code69 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.
60
386
23190
code70 - Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max)and resistivity as per IS-3975 25 Sqmm,3.5 Core (12 GI Strips - 4 x 0.8 mm)
(BESCOM Part III, Item code 32.07, Page No 9)
0.08
169607
13568.628
code71 - Fabricating supplying and mounting MS box made out....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.
40000
-
20800
code72 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.
4
487
1949.52
code73 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.
1
7396
7396.92
code74 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
1
3753
3753.16
code75 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
0.04
25384
1015.3936
code76 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
8
1462
11696.96
code77 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
1
5172
5172.74
code78 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. (Item code 5.48, Page No 21)
1
5886
5886.18
code79 - Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2.
1
15320
15320.12
code80 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.
2
10968
21937.96
code81 - Supply TR split Air conditions suitable for operation on A/C supply single phase 50 Hz 230 V with hermitically sealed compressor with air cooled condensor. Motor capacitor and start run capacitors relay and over loadprotector internal unit. Will be placed outside the room on the terrace to avoide noise including standered lenght of suitable size copper tubing convered with insulation tube ( High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit (2 ton capacity) (5 star) Door Shutter: 40mm thick flush door shutter with HOT PRESSED laminate on both sides with 300 x 600mm vision panel with 10mm th glass. Fixed with 4nos of hinges
34
65689
2233457.96
code81 - Orientation gallery SITC of single shutter wooden door with door closer
Construction of frame work: Frame work consists of wooden sections of size 100mm X 75mm Fixing arrangements shall be by means of 4 nos. of G.I. hold fast 225mmX20mmX4mm with split end on either side of the including hinges of SS 304 quality of size 102mmX102mmX3mm thick to capable of taking load up to 120 Kg of the shutter with SS pin, lockSteam Beech Wood Density : 600 - 800 Kg /m3 strike plate.
Thickness of laminate : 1mm thk
Core of the door will be blockboard / flush door.
Make : Century Door / Timex
Door Shutter: 40mm thick flush door shutter with HOT PRESSED laminate on both sides with 300 x 600mm vision panel with 10mm th glass. Fixed with 4nos of hinges
Cost to include demolition of existing wall and do provision of to install a new door with standard block work, plastering with paint finish as instructed by Enginer Incharge.
Cost to include all basic hardware such as handles, tower locks, cylinddrical locks etc,.
Door Sizes: Single leaf shutter door : 1000 x 2400 mm
Approved Brands: Century Doors or equivalent
1
61714
61714
code82 - Wall panelling for Graphics Construction of Frame work: Fabricating & fixing full height plywood panelling (overall thickness 62mm) consisting of 50mm x 50mm x 2mm Aluminum sections Jindal Make framework with all necessary reinforcements required of aluminum, at spacing not exceeding 600mm bothways ( horizontal & vertical ). Partition framework to be fixed to existing masonry walls. Rate to include providing and fixing of additional aluminium sections of approved size as per Architects drawings. Cost to include additional sections (horizontal & Vertical) as required for fixing of Digital Displays, Screens.,, Glass boards, and White boards as indicated by the Architect. Cost to also include the necessary provisions required to take Data & Electrical conduiting.
Boarding: Boarding with 18mm th Fire resistant plywood fixed to aluminum frame with self drilling metal fastners. Finishing: The plyboard to be finished with 1mm th laminate fixed using adhesives as recommended by the manufacturer.
Approved Brands - 1. Frame : Jindal aluminum sections or equivalent
2. Plywood - Green ply, Kitply, Merino, archidply or equivalent
3. Laminate- Merino, Greenlam or equivalent
51
11313
577005.84
code83 - Wall panelling for Projection
Construction of Frame work: Fabricating & fixing full height plywood panelling (overall thickness 62mm) consisting of 50mm x 50mm x 2mm Aluminum sections Jindal Make framework with all necessary reinforcements required of aluminum, at spacing not exceeding 600mm bothways ( horizontal & vertical ). Partition framework to be fixed to existing masonry walls. Rate to include providing and fixing of additional aluminium sections of approved size as per Architects drawings. Cost to include additional sections (horizontal & Vertical) as required for fixing of Digital Displays, Screens.,, Glass boards, and White boards as indicated by the Architect. Cost to also include the necessary provisions required to take Data & Electrical conduiting.
Boarding: Partition framework to be cladded with 2 Nos of 12.5mm Gypsum board with staggered joints upto false ceiling level in line & level screw fixed with 25mm drywall screws @ 300mm c/c with minimum staggered joints to avoid through joints & finished with proprietary supplied jointing tape & compound as per manufacturer's specification. Surface to be finished with top coat as per manufacturer's specification. Joints to be sand papered to achieve a smooth & seamless finish. Finishing: Dry wall partitions to be finished with 3 coats of acrylic emulsion paint of approved colour.
Cost to include SITC of projection area border profile with paint finish as per drawing.
Approved Brands - 1.Gypsum Plaster Board - Gyproc : Saint Gobain/ USG Boral/approved equivalent
2.Metal frame work - Gypsteel/Diamond /approved equivalent
3. Paint - Asian Paints, Nippon or equivalent
15
8547
128218.8
code84 - Wall panelling for inserted displays with wave pattern
Construction of Frame work: Fabricating & fixing full height plywood panelling (overall thickness 62mm) consisting of 50mm x 50mm x 2mm Aluminum sections Jindal Make framework with all necessary reinforcements required of aluminum, at spacing not exceeding 600mm bothways ( horizontal & vertical ). Partition framework to be fixed to existing masonry walls. Rate to include providing and fixing of additional aluminium sections of approved size as per Architects drawings. Cost to include additional sections (horizontal & Vertical) as required for fixing of Digital Displays, Screens.,, Glass boards, and White boards as indicated by the Architect. Cost to also include the necessary provisions required to take Data & Electrical conduiting.
Boarding: Boarding with 18mm th Fire resistant plywood fixed to aluminum frame with self drilling metal fastners. Finishing: The plyboard to be finished with 1mm th laminate fixed using adhesives as recommended by the manufacturer.
Cost to include an average projection of 600mm from true wall including creating slopes, curves in elevations as indicated in the drawings.
Cost to include providing of recess of upto 200 mm such as coves and niches, the shame shall be not measured seperately
Cost to include providing necessary BWP plywood backing up to 18mm for Digital displays as indicated in the drawing
Cost to include creating wave pattern as indicated in the concept views with approved shade of laminate by Architect.
Cost will be measured based on the board up area and not for frame works.
Approved Brands - 1. Frame : Jindal aluminum sections or equivalent
2. Plywood - Green ply, Kitply, Merino, archidply or equivalent
3. Laminate- Merino, Greenlam or equivalent
54
6838
369257.4
code85 - Wall panelling for curved projection
Construction of framework: Framework consists a sets of 72mm Floor/ Head galvanised channels gypsteel Ultra or equivalent (placed next to each other with gap off 30mm) Floor and stud channels used shall be 0.55mm thick having equal flange of 32mm fixed to floor and true ceiling with a backing of Acoustic tape with suitable fasteners (Hilti HLC 8/40) at 300mm centres staggered. Noise and fire rated caulking compound to be caulked along the perimeter of the partition frame . Then 70mm Stud channel (0.55 mm thick having one flange of 34mm and another flange of 36mm) should be placed into the floor/head channel positioned vertically at 610mm centres. A Noggin channel of 70 mm width (0.55 mm thk having two equal flanges of 40 mm each) has to be provided at the horizontal joints of the two boards screw fixed to the studs using metal to metal flat head screws. Extra reinforcement to be provided at openings (doors, windows, etc.,) all the steel studs used shall have high quality galvanising and must be fully knurled. Ensure studs are firmly fixed and no undulations before boarding.
Cavity filling: The stud is to be filled with fiberglass wool having density of 48kg/m3 and thickness of 50 mm. fiberglass wool is held in position by using holding clips or galvanised cross wire braces or by using adhesive tapes. fiberglass wool should be wrapped in Tissue
Boarding: A layer of fiber cement board and a layer of 12.5 mm thick flexible gypsum board is fixed on front side of stud partition system by using 3.5mm x 35/50mm Corrosion resistant self-tapping zinc plated steel screws with countersunk cross-head drywall screws. The fiber cement board and gypsum plaster boards joints to be staggered to each other. Joints are lined by using fiber tape and jointing compound recommended by manufacturer.
Finishing: Dry wall partitions to be finished with 3 coats of acrylic emulsion paint of approved colour.
Approved Brands - 1. Gypsum plaster board - Gyproc / USG Boral or approved equivalent 2. Fiber cement boards - Shera / Visaka or approved equivalent 3. Glass fiber wool - Prominent Insulations/ TWIGA/OWENS CORNING approved equivalent
4. Metal frame work -Gypsteel/Diamond/Anutone/approved equivalent
60
8783
527035.2
code86 - Mineral Fibre Modular Ceiling (0.5 NRC Microlook edge)
Providing & Fixing Fire retardant -2hr Mineral Fibre Acoustical Suspended Ceiling System with ANF (Bevelled Tegular) edge tiles with 24mm exposed grid. The tiles should have Humidity Resistance (RH) of 90%, NRC 0.5, Light Reflectance greater than equal to 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 34%.
The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm and a load carrying capacity of minimum 15.68 Kgs/M2 & pull out strength of 100Kgs. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system.
INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using suspension system (specifications below) at 1200mm maximum centre & not more than 150mm from spliced joints. The First/Last suspension system at the end of each main runner should not be greater than 600mm from the adjacent wall.
1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm modules to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees. The 1200mm cross tees to have central “birdsmouth” notches to facilitate fitting of 600mm cross tees. Perimeter trim to be wall angles, secured to walls at 450 mm maximum centres.
SUSPENSION SYSTEM accessories manufactured and supplied consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a Galvanised Thickness of 80grm/ sq.m, A pre Straightened Hanger wire of dia - 2.68 mm of 1.83 m length., thickness of 80 g/sq.m and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull strength of 110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner. 50-60 Microns Powder coating white color
Make: Gyproc / USG / Amstrong
52.5
3473
182380.8
code87 - Cyclorama Chairs
Cyclorama Theatre chairs as represented in the visualization
Model : Custom, featherlite, monarch Ergo, Ergo Designs
13
15257
198346.2
code88 - Display area sign boards with icons
Made of 10mm th MDF board with CNC cutting of individual letter and painted with Ducco, etch letter to be pasted on to the wall surface using glue with high adhesive strength with the help of a stencil
Size : 600 x 600 mm (Average)
14
14124
197744.4
code89 - Vinyl Print with installation
Providing & Fixing Printed Vinyl Graphics on Punned or Levelled Surface of (3M or Equivalent) , 3M Scotch print controltac & comply wall graphics IJ 180 C + 8520 overPlywood / MDF or Laminate. Cost to include cleaning for any stains, scffolding for height upto 8000mm from FFL
Make of vinyl: 3M, LG, Avery
105
5065
531902.7
code90 - HISTORY GALLERY
Wall panelling for 3D Relief Mural fixing
Construction of Frame work: Fabricating & fixing full height plywood panelling (overall thickness 62mm) consisting of 50mm x 50mm x 2mm Aluminum sections Jindal Make framework with all necessary reinforcements required of aluminum, at spacing not exceeding 600mm bothways ( horizontal & vertical ). Partition framework to be fixed to existing masonry walls. Rate to include providing and fixing of additional aluminium sections of approved size as per Architects drawings. Cost to include additional sections (horizontal & Vertical) as required for fixing of Digital Displays, Screens.,, Glass boards, and White boards as indicated by the Architect. Cost to also include the necessary provisions required to take Data & Electrical conduiting.
Boarding: Boarding with 18mm th Fire resistant plywood fixed to aluminum frame with self drilling metal fastners. Finishing: The plyboard to be finished with 2 coat of primer as recommended by the Architect.
Approved Brands - 1. Frame : Jindal aluminum sections or equivalent
2. Plywood - Green ply, Kitply, Merino, archidply or equivalent
3. Laminate-Merino, Greenlam or equivalent
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass
39
5752
224347.5
code91 - Display Island - A for Heritage,Printing,Temple & Nature
As per appoved concept.
Size: 3000 x 1500 x 900 (LXDXH)
4
130268
521073.84
code92 - Display Island - B for Art
As per appoved concept
Size: 3000 x 1500 x 900 (LXDXH)
1
271931
271931
code93 - Display area sign boards with icons
Made of 10mm th MDF board with CNC cutting of individual letter and painted with Ducco, etch letter to be pasted on to the wall surface using glue with high adhesive strength with the help of a stencil
Size : 600 x 600 mm (Average)
6
14124
84747.6
code94 - Infographics Stand
Content (relevant topics), Design development, Printing and installation of Braille sign systems for the visually impaired is to be designed to comply with the regulations set forth as per the visitors spec equivalent to American standards with disabilities (ADA) and as well disability discrimination Act (DDA). The standard sign types as per ADA are:
6’’ x 9’’ Restroom identification signs/ Facility room and number signs.
14’’ x 10’’ Lift safety signs with pictograms.
6’’ x 3’’ Meeting/Training room signs & other identification signs. should be incorporated in all as per design. Material - Metal / Matte finish Vinyl/ Canvas/ Fabric/ approved material with suitable frame and fixing hardware/ Equivalent (Approval should be taken from client)/ As per standard Braille sign guidelines.
Refer Dwg No :
Dimension: 450 x 370 x 1200 mm
5
13039
65195
code95 - SCULPTURE GALLERY
General Instructions
Supply, installation, testing and commissioning of Display cases for archifacts:
MS Powder coating CR sheet for cladding and MS tube frame work.
Glass Specifications: Single Glazed Units (SGU) in the vision area consisting of glass of 5 - 12 mm thick toughened clear glass. This glazing system will conform the following: Glass to have less than 120 PPM of iron content; Light transmission of min 91.2% to ensure purity and clarity and with thickness tolerances of +/- 0.15mm for upto 6mm and +/- 0.2mm for thicker glasses. Free from Antimony oxides. compressive strength (1000 MPa) & tensile strength (40 MPa). Glass Make - Saint Gobain / AIS
Hardware Make - Ozone, Godrej, Hettich (India) or equivalent
TYPE -1 DISPLAY UNITS
Floor Mounted Glass Display Boxes as per discription above. The quoted price shall cover all cost towards LED lights , Transformers , internal wiring, magnetic / mechanical locking arrangements etc. the units shall have heavy duty height adjusters etc. complete in all respect.
-Dimension 3' x 2' x 7'
30
233640
7009200
code96 - SCULPTURE GALLERY
General Instructions
Supply, installation, testing and commissioning of Display cases for archifacts:
MS Powder coating CR sheet for cladding and MS tube frame work.
Glass Specifications: Single Glazed Units (SGU) in the vision area consisting of glass of 5 - 12 mm thick toughened clear glass. This glazing system will conform the following: Glass to have less than 120 PPM of iron content; Light transmission of min 91.2% to ensure purity and clarity and with thickness tolerances of +/- 0.15mm for upto 6mm and +/- 0.2mm for thicker glasses. Free from Antimony oxides. compressive strength (1000 MPa) & tensile strength (40 MPa). Glass Make - Saint Gobain / AIS
Hardware Make - Ozone, Godrej, Hettich (India) or equivalent
TYPE -2 DISPLAY UNITS
Floor Mounted Glass Display Boxes as per discription above. The quoted price shall cover all cost towards LED lights , Transformers , internal wiring, magnetic / mechanical locking arrangements etc. the units shall have heavy duty height adjusters etc. complete in all respect.
-Dimension 4' x 2' x 7'
8
266680
2133440
code97 - SCULPTURE GALLERY
General Instructions
Supply, installation, testing and commissioning of Display cases for archifacts:
MS Powder coating CR sheet for cladding and MS tube frame work.
Glass Specifications: Single Glazed Units (SGU) in the vision area consisting of glass of 5 - 12 mm thick toughened clear glass. This glazing system will conform the following: Glass to have less than 120 PPM of iron content; Light transmission of min 91.2% to ensure purity and clarity and with thickness tolerances of +/- 0.15mm for upto 6mm and +/- 0.2mm for thicker glasses. Free from Antimony oxides. compressive strength (1000 MPa) & tensile strength (40 MPa). Glass Make - Saint Gobain / AIS
Hardware Make - Ozone, Godrej, Hettich (India) or equivalent TYPE -3 DISPLAY UNITS
Floor Mounted Glass Display Boxes as per discription above. The quoted price shall cover all cost towards LED lights , Transformers , internal wiring, magnetic / mechanical locking arrangements etc. the units shall have heavy duty height adjusters etc. complete in all respect.
-Dimension 2' x 2' x 7'
15
194700
2920500
code98 - Infographics Stand
Content (relevant topics), Design development, Printing and installation of Braille sign systems for the visually impaired is to be designed to comply with the regulations set forth as per the visitors spec equivalent to American standards with disabilities (ADA) and as well disability discrimination Act (DDA). The standard sign types as per ADA are:
6’’ x 9’’ Restroom identification signs/ Facility room and number signs.
14’’ x 10’’ Lift safety signs with pictograms.
6’’ x 3’’ Meeting/Training room signs & other identification signs. should be incorporated in all as per design. Material - Metal / Matte finish Vinyl/ Canvas/ Fabric/ approved material with suitable frame and fixing hardware/ Equivalent (Approval should be taken from client)/ As per standard Braille sign guidelines.
Dimension: 450 x 370 x 1200 mm
8
13039
104312
code99 - ARTIFACTS GALLERY
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass
Enclosure for 32"Kiosk
As per appoved concept.
Size: 600 x 450 x 900 (LXDXH)
5
65133
325668.2
code100 - ARTIFACTS GALLERY
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass Display case for Wood carvings
As per appoved concept.
Size: 10000 x 900 x 2100 (LXDXH)
1
564040
564040
code101 - ARTIFACTS GALLERY
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass Display case for Coins
As per appoved concept.
Size: 4000 x 300 x 2100 (LXDXH)
1
253700
253700
code102 - ARTIFACTS GALLERY
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass Display case for Metals/Idols
As per appoved concept.
Size: 4000 x 900 x 2100 (LXDXH)
1
383500
383500
code103 - ARTIFACTS GALLERY
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass Display case for Inscriptions
As per appoved concept.
Size: 3000 x 1200 x 2100 (LXDXH)
2
466100
932200
code104 - ARTIFACTS GALLERY
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass Enclosure for Miscellenious
As per appoved concept.
Size: 7500 x 600 x 2100 (LXDXH)
2
413590
827180
code105 - Display area sign boards with icons
Made of 10mm th MDF board with CNC cutting of individual letter and painted with Ducco, etch letter to be pasted on to the wall surface using glue with high adhesive strength with the help of a stencil
Size : 600 x 600 mm (Average)
9
14124
127121.4
code106 - Infographics Stand
Content (relevant topics), Design development, Printing and installation of Braille sign systems for the visually impaired is to be designed to comply with the regulations set forth as per the visitors spec equivalent to American standards with disabilities (ADA) and as well disability discrimination Act (DDA). The standard sign types as per ADA are:
6’’ x 9’’ Restroom identification signs/ Facility room and number signs.
14’’ x 10’’ Lift safety signs with pictograms.
6’’ x 3’’ Meeting/Training room signs & other identification signs. should be incorporated in all as per design. Material - Metal / Matte finish Vinyl/ Canvas/ Fabric/ approved material with suitable frame and fixing hardware/ Equivalent (Approval should be taken from client)/ As per standard Braille sign guidelines.
Dimension: 450 x 370 x 1200 mm
4
13039
52156
code107 - PAINTING GALLERY
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass
Display case for Painting - Type A
As per appoved concept.
Size: 12000 x 900 x 2100 (LXDXH)
2
775260
1550520
code108 - Display case for Painting - Type B
As per appoved concept.
Size: 3000 x 900 x 2100 (LXDXH)
2
264600
529200
code109 - Display case for Inscriptions
As per appoved concept.
Size: 8000 x 900 x 2100 (LXDXH)
2
621860
1243720
code110 - Zig Zag partition for Painting display
As per appoved concept.
Size: 9000 x 300 x 2100 (LXDXH)
2
761100
1522200
code111 - Enclosure for 32"Kiosk
As per appoved concept.
Size: 600 x 450 x 900 (LXDXH)
2
65133
130267.28
code112 - Display area sign boards with icons Made of 10mm th MDF board with CNC cutting of individual letter and painted with Ducco, etch letter to be pasted on to the wall surface using glue with high adhesive strength with the help of a stencil
Size : 600 x 600 mm (Average)
8
14124
112996.8
code113 - Infographics Stand
Content (relevant topics), Design development, Printing and installation of Braille sign systems for the visually impaired is to be designed to comply with the regulations set forth as per the visitors spec equivalent to American standards with disabilities (ADA) and as well disability discrimination Act (DDA). The standard sign types as per ADA are:
6’’ x 9’’ Restroom identification signs/ Facility room and number signs.
14’’ x 10’’ Lift safety signs with pictograms.
6’’ x 3’’ Meeting/Training room signs & other identification signs. should be incorporated in all as per design. Material - Metal / Matte finish Vinyl/ Canvas/ Fabric/ approved material with suitable frame and fixing hardware/ Equivalent (Approval should be taken from client)/ As per standard Braille sign guidelines.
Dimension: 450 x 370 x 1200 mm
4
13039
52156
code114 - AUDITORIUM Stage Podium stand
As per appoved concept.
Size: 900 x 450 x 900 (LXDXH)
1
30161
30161.06
code115 - Auditorium chairs
Seating portable plastic chairs
Approved make: Nilkamal/Equivalent
100
1416
141600
code116 - RESEARCH & LIBRARY
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass
Enclosure for Book shelf
As per appoved concept.
Size: 6500 x 600 x 2100 (LXDXH)
4
411820
1647280
code117 - Study Desk
As per appoved concept.
Size: 2750 x 450 x 2100 (LXDXH)
2
101480
202960
code118 - Enclosure for Audio pods
As per appoved concept.
Size: 1500 x 1500 x 2100 (LXDXH)
2
295000
590000
code119 - Library Chair
Library chairs as represented in the visualization - Type 1
Model : Custom, featherlite, monarch Ergo, Ergo Designs
16
11328
181248
code120 - Study desk chairs as represented in the visualization - Type 2
Model : Custom, featherlite, monarch Ergo, Ergo Designs
10
7670
76700
code121 - 4 seater Study table as represented in the visualization
Model : Custom, featherlite, monarch Ergo, Ergo Designs
4
55224
220896
code122 - Display area sign boards with icons
Made of 10mm th MDF board with CNC cutting of individual letter and painted with Ducco, etch letter to be pasted on to the wall surface using glue with high adhesive strength with the help of a stencil
Size : 600 x 600 mm (Average)
12
14124
169495.2
code123 - OTHER EXHIBITS
External pedestal for sculpture
Made of Natural stone fixed on the floor with encrptions plate on it. The cornor should be finished with nosing and polised. The top surface should be even and have provison to fix the sculpture as instructed by Architect.
Dimension: 3' x 2'x 4'
General Instructions for fixed furniture
Providing and supply of custom built fixture with Aluminum formwork made of 50 x 50mm section frame to base e. Frame spacing shall not exceed @ 600mm c/c one way and the framework cladded with first skin of 16mm thk ply. The top skin shall be finished with 6mm thk solid acrylic of approved shade and color, and/or matching lots, as per Architect's instructions,(if so required), on partitions, ceiling and paneling as per pattern and design as indicated on the drawings. Cost to be inclusive of All joint to be supported with frame or support members as specified by the Architect. Joints to be bonded with only "joint Adhesive provided by the approved dupont vendor"- as specified .Cost to be inclusive of any coving to be done for the panelling along the wall & ceiling and any stencil cutting as per architect's detail drawing.
Provision to be provided for lighting, electrical, data & AV wiring including conuting, equipment mounting etc., The contractor shall co-ordinate with other agencies to ensure seamless workflow including co-ordination with their services, finishes requrired etc., in correspondance with the project manager
Where ever applicable glass box will be constructed with 8mm th clear toughened glass fixed using UV glue / silicon carefully joined with in exemplinarry skill to perfect corners. The glass box will be placed on the podium with support from solid acrylic.
Plywood Make:Century, Greenply, Merino or other brand approved by the architect
Solid Acrylic : Make: Hanex, Samsung Staron Glass Make : Saint Gobain Clear Glass
52
59000
3068000
code124 - Souvenir Display
As per appoved concept.
Size:6000 x 900 x 2100 (LXDXH)
1
695020
695020
code125 - 3 seater sofa as represented in the visualization:
Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W)
X2.75(H) ft made of upholstery fabric with seats fitted with padding,
springs, webbing and as per direction of engineer in charge.
SR rference no: PWDSR-Vol-IIBuildings-GrandFinale-15-11-2023 -02, 22.16
Model : Custom
5
44250
221250
code126 - Artwork
Themed Sculpture at the Museum entrance.
Supply, Installation,Testing and Commsioning(SITC) of Themed Sculpture at the Museum entrance. Made of first quality FRP/MS sheet material with necessary framing Which should show a grand theme based welcome signage at the entrance of the Museum including Govt. of Karnataka emblam, Deartment logo, supporting icons etc., the cost should include necessary lighting.
Made in FRP / Wooden / GRC / Metal finish/ approved material in natural / realistic finish/ Equivalent (Approval should be taken from cleint)
Dimensions: L: 6.5m x W: 3.5m x H: 5m
1
2360000
2360000
code127 - External title board
Made of 16mm Prelaminated board/Plywood with laminate finsh. Laminate shade: Brushed Gold Edge with matching PVC edge band. Including necessary textual information like Museum name, department etc. in Kannada and English languages. All textual format and visuals references to be approved by the department. Fixed to wall/surface as decided on site. 10mm thk acrylic letter cut out and pasted on lamianted board
8
29156
233252.96
code128 - ELECTRICAL WIRING
-Point wiring for power outlets and light point including conduits
750
774
580560
code129 - POWER POINTS
Power points with 15/5 Amps combination receptacle with 15 amps switch in MS box. The box shall be flush mounted in brick/hollow block /Ply Wall Panelling etc.,
200
649
129800
code130 - LIGHT FIXTURES
-SITC of flexible 3x2W,6W, spike light for the illumination of models/statues. The luminaire shall have tiltable bracket to focus on the object. The luminaire shall have IP protection of 65 and IK of 08. The spike light shall be of 3000K CCT and CRI greater than 70, life of 50,000 burninghours. There shall be integral driver for the luminare should have operating voltage range of 80 to 400V. Drvier should have PFgreater than 90 and THD less than 20%.
Approved Make : Panasonic/ Philips/Havells/Equivalent
200
6844
1368800
code131 - AV & APPLCATIONS WORKS
PROJECTION SCREEN
One Chip DLP Projector with Laser Light Source , 20000 hours lamp, 8000 Lumens or more, 16:10 Aspect Ratio, WUXGA Resolution, 10000:1 Contrast Ratio, 100-350 inch Screen Size, Vertical : +-40 degree Horizontal +- 15 Degree Keystone Correction, 3xHDMI IN, Stereo Mini Jack 3.5mm, RS232 for Control.
Approved Makes: Barco/Digital Projection/Panasonic/Epson/Christie/Equivalent (Approval should be taken from client)
1
1286895
1286895
code132 - Short throw lens for above projector, Wuxga, 16:10.
Approved Makes: Barco/Digital Projection/Panasonic/Epson/Christie/Equivalent
1
354000
354000
code133 - Mounting kit for above projector.
Should be able to bear at least 5 times the weight of display considered
Approved Makes: Custom/OEM Specific
1
25738
25738.16
code134 - Intel I7 12th gen 12700/ 64GB Ram/ 1 TB SSD/ Win 11 Pro.
Approved Makes: Dell/HP/Lenovo/Equivalent
1
240222
240222.04
code135 - Screen Paint for 24 SQ mtr Area.
Approved Makes: Goo Paint/Equivalent
1
70800
70800
code136 - 20 Dual Parabolic Sound Dome Directional Speaker 8 Ohm, 15W , Max Power of 87 dB @ 1 M, 55 degree Coverage angle, 75or 350Hz switchable crossover frequency,Frequency Response 130Hz to 22KHz, Max Program Power 30W, Max Continuous Power - 15W.
Approved Makes: Sound Tube /Equivalent
1
153551
153551.04
code137 - INSERTED 32" DISPLAYS
32" Touch Display with Built in Windows PC, win 10 IOT Enterprise, 4 GB, 128 GB SSD
with speeker.
Approved Makes: ELO/Samsung/Panasonic/LG/Equivalent
8
323440
2587522.88
code138 - Mounting kit for above display.
Should be able to bear at least 5 times the weight of display considered
Approved Makes: Custom/OEM Specific
8
21240
169920
code139 - CURVED BACKDROP PROJECTION
One Chip DLP Projector with Laser Light Source , 20000 hours lamp, 7500 Lumens, 16:10 Aspect Ratio, WUXGA Resolution, 10000:1 Contrast Ratio, 100-350 inch Screen Size, Vertical : +-40 degree Horizontal +- 15 Degree Keystone Correction, 3xHDMI IN, Stereo Mini Jack 3.5mm, RS232 for Control.
Approved Makes: Barco/Digital Projection/Panasonic/Epson/Christie/Equivalent
1
820279
820279.4
code140 - Short throw lens for above projector, Wuxga, 16:10.
Approved Makes: Barco/Digital Projection/Panasonic/Epson/Christie/Equivalent
1
354000
354000
code141 - Mounting kit for above projector.
Should be able to bear at least 5 times the weight of display considered
Approved Makes: Custom/OEM Specific
1
25738
25738.16
code142 - Intel I7 12th gen 12700/ 64GB Ram/ 1 TB SSD/ Win 11 Pro.
Approved Makes: Dell/HP/Lenovo/Equivalent
1
240222
240222.04
code143 - Screen Paint for 24 SQ mtr Area.
Approved Makes: Goo Paint/Equivalent
1
70800
70800
code144 - 2-way design employing two 5 .25-inch (135mm) woofers with a 1-inch (25mm) titanium dome tweeter
2
34703
69407.6
code145 - Employs two 5 .25-inch (135mm) woofers and two 1-inch (25mm) tweeters in a 5.1/7.1 dual mode configuration
1
52053
52053.34
code146 - Subwoofer
2
26876
53753.72
code147 - 7.2-Channel Network A/V Receiver
1
113595
113595.06
code148 - 32 KIOSK
32" Touch Display with Built in Windows PC, win 10 IOT Enterprise, 4 GB, 128 GB SSD
with speeker.
Approved Makes: ELO/Samsung/Panasonic/LG/Equivalent
7
323440
2264082.52
code149 - Mounting kit with kiosk enclosure for above display.
Should be able to bear at least 5 times the weight of display considered
Approved Makes: Custom/OEM Specific/Equivalent
7
14160
99120
code150 - Audio/ Video Booth
24" Touch Display with Built in PC
Approved Makes: ELO/ViewSonic/Dell/Equivalent
2
67035
134071.6
code151 - Mounting kit for Above Display
Approved Makes: Custom/OEM Specific
2
5148
10296.68
code152 - CONTENT DEVELOPMENT WORKS
PROJECTION SCREEN
Technology: Projection
Content Development:- 2D/3D/Video/Audio/ Graphics design & development of relevant topics as per the approved concept in 3 languages (Kannada, Hindi & English). Should support the native resolution of the projector with 1:1 Pixel mode mapping for 4K video content. (12min x 100000 per min)
1
1416000
1416000
code153 - INSERTED 32" DISPLAYS
Technology: 32" Touch Screen
Content Development: -
2D/3D/Video/ Audio/ Interactive Content/ Graphics design & development of relevant topics in 3 languages (Kannada, Hindi & English). Should support the native resolution of the display, with 1920 x 1080 resolution.(14 min x 100000 per min)
1
1652000
1652000
code154 - CURVED BACKDROP PROJECTION
Technology: Projection
Content Development:- 2D/3D/Video/Audio/ Graphics design & development of relevant topics as per the approved concept in 3 languages (Kannada, Hindi & English). Should support the native resolution of the projector with 1:1 Pixel mode mapping for 4K video content. (12min x 100000 per min)
1
1416000
1416000
code155 - 32 KIOSK
Technology: 32 Touch KIOSK Content Development: -
2D/3D/Video/Audio/Interactive content/Graphics design & development of relevant topics in 3 languages (Kannada, Hindi & English) as per the approved concept, Interactive content multi hotspot UI. Should support the native resolution of the display with 1:1 Pixel mode mapping for 1920 x 1080 video content. (10min x 100000 per min)
1
1018000
1018000
code156 - Audio/ Video Booth
Technology: 15" Touch Display
Content Development: -
2D/3D/Video/ Audio/ Graphics design & development of relevant topics as per the approved concept with translation of the speeches in 3 languages (Kannada, Hindi & English). Should support the native resolution of the display with 1:1 Pixel mode mapping, 1920 x 1080 resolution video content.(30 min x 100000 per min)
1
3540000
3540000
code157 - Audio/ Video Booth
Technology: Technology: curved Projection
Content Development:- 360 degree Video with drone/ ground shoot/Audio/ editing/ post production/Graphics design & development of Lakkundi site / relevant topic as per the approved concept in 3 languages (Kannada, Hindi & English). Should support the native resolution of the projector with 1:1 Pixel mode mapping for 4K video content. (5 min x 322000 per min)
1
1899800
1899800
code158 - Audio/ Video Booth
Audio Guide Solution:
20 Audio Guide devices with Interpretation Application for minimum 100 artifacts, supporting with Kannada, Hindi & English Languages.
1
2950000
2950000
code159 - VR Technologies & Systems
VR Booth
VR Booth: Supply, installation, testing & commissioning of Virtual Reality technlogy, necessary seating arrangement, content and application including following equipments:
- 32" Touch Display with Built in Windows PC, win 10 IOT Enterprise, 4 GB, 128 GB SSD
with speeker. Approved Makes: ELO/Samsung/Panasonic/LG/Equivalent - Oculus Quest 2, Advanced All in One , VR Headset (128)GB, Motion Controller & extension cable.
- 2- Server - i7, 16 GB RAM, 1TB SSD, WIN 11 PRO with, Nvidia T1000-4 GB graphics - 6 mtr HDMI cable & connectors
- 10 Minutes or 4 historical monuments 360 degree content and interactive application including necessary voice over narration in Kannada and Hindi languages
1
2898647
2898647.6
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements