Department Of Archaeology Museum And Heritage Tender

code04 - Providing and constructing burnt brick masonry with approved quality of modular bricks of standard size of class designation 5.00 N/mm2 table moulded) with lime mortar for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specification - Do- in Lime mortar 1:3 Prop (Over roof)

code05 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)

code06 - Providing and erecting 4 legged jack steel pipe centering with necessary platform for working with suitable height the bracing are to be properly tie with saction of pipe both horizontally, langitudinally and diagonally with safety held for safety measures of the labours and for conveying and construction of materials,charge including transportation and cleaning the site after completion of work to the maximum heigh of 6mtr etc, complete as per the direction of the incharge of the work.

code07 - Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also leaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/ structure, all as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding).

code08 - Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing

code09 - Providing and furninshing of pollished stone bench in the premises of Kalamath of size 1.8 X 0.45 X 0.65 including prepaeration, fixing and transporting charges in the direction of engeneer incharge of the work

code10 - Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m (Note: Cost of De-watering upto 5 % may be added, where required assessment for dewatering shall be made as per site condition) (VOL-1-Pg- 5,item-1.4.1)

code11 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately ix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates

code12 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with

code13 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand

code14 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (VOL-1-Pg- 15,item-2.1.3)

code15 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregate

code16 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.

code17 - Supplying and fixing M.S. Rectangular poles made out of 2 equal angles of 65x65x6 mm welded together and fixed in CC (1:2:4) WITH 2 NOS 16mm dia M.S. hold fast rods each of length 25 cms. Including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead lifts and as per the directions of the Engineerin - charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting ( excluding cost of earthwork and concrete)

code18 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

code19 - providing and fixing M.S Block pipe of 38mm dia, of heavy guageof 14 including removing the bends, cutting the pipe,and fixing pipe in between the existing two verticle poles (MS rectangular poles) and spot welding the chain link with M.S.block pipe including cost of all materials wastage in cutting and scaffolding wherever necessary with all lead and lifts as directed by the engineers-in-charge of work etc, complete including two coats of approved quality paint over one coat of shop paint

code20 - Providing and fixing M.S Gate as per Chief Architect Drawing, using 50mmx50mm 14 gauge M.S. Hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mmx6mm and 16x16mm square rods for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm M.S. flats for horizontal member and at the top cast iron spikes are provided at alternate vertical members as shown in the drawing etc.,complete. All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint (shop paint) etc.,complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipments, and electricity charges, with lead and lift, loading and unloading charges,etc.,complete as per specification.

code21 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code22 - Providing and preparing VETREOUS ENAMEL (All wearhwe proof) porcelain base ceramic coated (baked under 800 to 850c temp) guage CRCA mild steel and enamalled in white background and RED BROWN letters or blue bakground and WHITE LETTERS with specified matter in KANNADA & English with LOG's as per your approved text, shown in the enclosed colour drawing. including fitted with anti corrosive STAINLESS STEEL screws with SUPPORTING STAND (PILLAR) OF STONE OF size 10" width x 8" thcik x 84" height of per board as shown in the enclosed Drawing. the stone frame and supporting stand fitted with stainless steel nuts, bolts & washers including fixing at VARIOUS SITES (Arround the 100km radius

code23 - Providing and furninshing of pollished stone bench in the premises of size 1.8 X 0.45 X 0.65 including prepaeration, fixing and transporting charges in the direction of engeneer incharge of the work