Archaeology And Museums Department Tender

Carefull and Scientific dismanting plastering and removing the debries with a lead up to 200m as per direction of higher Authorities(Non Schedule Item)

KSRB 24-10 : Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per specifications. Specification No.KBS.

Providing a fresh lime mortar plaster in 1:2 propon. As a base coat to a thickness of 20-25mm and with lime mortar 1:1 propn 10mm thick as afine coat including preparation of moulding as per original design including using fibre material such as black jaggary, jute, balefruit and egg etc., including lead charges for lime and sand, lift charges above 3mt height including higher charges for materials, grinding machine etc., complete as per the direction of higher authorities.(Non Schedule items)

KSRB 15-17.1 : Applying priming coat over new wood surface and / or wood based surface with white lead paint priming including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications

KSRB 15-17.6 : Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning surface of all dirt, dust, and foreign matter, sand papering including cost of materials, labour, complete as per specifications.

KSRB 9.5-1 : Providing and fixing in position fully panelled Teak wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications. ( excluding cost of fixtures) Specification No. KBS 9.34.

Providing melamine polishing of approved shade including removing and refixing of doors shutters, glass, beading and existing polishing, scraping with blade and rubbing with zero size sand paper and applying sealer coat by way of spraying with necessary compressor and applying patty after rubbing with steel wool including two coats of approved shade of melamine polish etc., complete.

Providing and finishing external walls in two coats over one coat of primer with antifungal paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. (P.No. 124, I.No. 15.104 of CSR 2015-16).

KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons for heights more than 3.50m from ground level. - 0 to 5 mtrs.

Hire Charges for Providing and erecting 4 legged Jack steel pipe centering with necessary platform for working with suitable height the bracing are are to be properly tied with same section of pipe both horizantally, langitudinal and diagonaly with safety belt for safety measures of the labours and for conveying and consruction of materials including cost of all materials, labour, lifts and all insidental charges, including transportaion and cleaning the site. after completion of work to the maxium ht of 60mt etc., complete as per the direction of the incharge of work. Until Complition of Work (Quation Rate)

KSRB-6.2.3: Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 5.0 Newton per sqmm (table moulded) with cement mortar 1:3 for basement and superstructure including cost of materials, labour charges, scafflolding, curing complete as per specifications.

Providing and laying Madras terrace as per design and direction with one course of special made (7"x 2.5"x 1.5") Bricks wire Cut quality plan sized brick on edge set in 1:3 lime M ortar one course of flat Brick in same size (Header) and allowed to set for 15 days in getal curing to providing and apply 1:3 lime bat cobba of avarage 6" thick with suitable slope to drain mouth etc., rammed as per instruction at the rate of 2 working shits per sqm of one helper cured jently and clay/suitable flooring tiles laid over the surface set in 03:1:3 lime mortar etc., complete with all lead and lift and asper the direction of incharge Engineer in the work. (Excluding Wooden Materials)

Providing lime concrete terracing on roofing, for weather proof course, average thickness 100mm, laid to slope with 25mm nominal size brick jelly and 50% lime surkhi mortar 1:2 (one lime putty two surkhi ) rammed and finished with gur and Belgiri treatment rounding off junctions with parapets including cost of materials, labour complete as per specifications.

KSRB-10.2: Providing and laying in position Yelahanka tiles of size 250 x 250 mm of approved quality and make, over a bed of cement mortar 1:3 an average thickness 25mm over weather proof course and pointed with cement mortar 1:3 mix with red oxide including curing cost of materials, labour complete as per specifications.

KSRB 9.4-1 : Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications.

KSRB 8.6-8 : Providing and fixing on wall surface. 40 kg / sq.cm H.D.P.E. rain down water pipes 110mm outer dia. approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, complete as per specifications. dia 110mm

Stone cleaning specification :Cleaning unpolished granite surface by application of Proven, Readily Biodegradable, VOC free, stabilised, Non-Dilutable, Water Base & Ready to use (RTU) liquid chemical formulation with no contact time restriction over the heavily soiled unpolished granite stone surface using a 30 psi spraying equipment / Roller / Brush spreading & thoroughly wetting the chemical @ minimum 0.25 ltr to cover 1sq.mtr on the surface to be treated. Allow the penetration & chemical reaction time for a minimum of 24 hrs time. The surface is then low pressure water rinsed with rotary nozzle @ 700 psi after scrubbing the surface till the organic & inorganic contamination, dirt, hydro-carbon soils, algae & rust stains from both the surface & pore of the substrate is completely removed, the stone is returned to its natural colour & permeability restored. The formulation being used should be free from corrosive acids such as Hydrochloric or Muriatic acid, Hydrochloric acid, caustics or Sodium Hydroxide, bleach or sodium Hypochlorite, abrasives and petroleum distillates. No free Acids or Alkalis to be used. The process should include all chemical materials, labour, application tools, spraying equipment, Low pressure washer, safety procedures, hand gloves, face shields, goggles, protective wear clothing, scaffolding & working platform, lead & lift, transportation, all incidental charges etc., complete as per the directions of the Engineer-in-charge of the work.

Removing the stone members all sizes of the existing structure the stones should be removed carefully in such a manner that no damages should be made to the existing sculptures and stacking the stones with in the monument premises including cost and conveyance of all materials, labour charges etc; complete as per the directions of the higher authorities. (Data Rate)

Supplying of Granite stones including convening the stones from quarry to work spot, hire charges of machinery loading and unloading charges etc., complete as directed by higher authoritie.

KSRRB M100-4.1 Cost of Haulage Excluding Loading and Unloading MORTH - 100 / Chapter 1 Case-I : Surface Road

KSRB-5-8.2: Providing two line dressing to granite stone slab as per specifications.

Providing approved M-sand to site for laying of flooring slabs etc., complete as per direction of engineer incharge of work

Resetting stone members including conveying from stocked position setting on its proper position to correct line and plumb and level including spreading of sand/M-sand with all lead, lifts and labour charges as directed by the engineer in charge of work.

Providing ruled pointing to coursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing complete as per specifications.

Removing debris such as brick bats,concrete,earth wastage materials etc., beyond 5km outside the monument through vehicle including hire cherges of vehicle, crew charges, labour charges for loading & unloading etc., complete as dircted by the higher authorities. (Data Rate).