Defence Research And Development Organisation Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Defence Research And Development Organisation - DRDO Tender
Civil And Construction
Building Construction
Eprocure
Opening Date23 Dec 2024
Closing Date13 Jan 2025
Tender Amount₹ 1,23,00,000
Costs
EMD
₹ 2,46,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_DRDO_841087_1Tender No
CCEESTS/ENQ/CON/MQ TF-3/BLR/311/2024-25Tender Authority
Defence Research And Development Organisation ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 SQM on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All Kinds of soil
3
262
786
... More
Ordinary rock
3
705
2115
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm in depth, consolidating EACH deposited layer by ramming & watering, lead up to 50m & lift upto 1.5m.
22
209
4598
... More
SUBHEAD-II ANTI TERMITE TREATMENT
-
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20%
25
235
5875
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL
anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
50
38
1900
... More
SUBHEAD- III : PLAIN & REINFORCED CONCRETE
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level :
-
-
-
... More
1:4:8 (1 Cement : 4 Coarse sand (Zone III) derived from natural sources) : 8 Graded stone aggregate 40 mm nominal size derived from natural sources)
2
6987
13974
... More
1:3:6 (1 Cement : 3 Coarse sand (Zone III) derived from natural sources) : 6 Graded stone aggregate 20 mm nominal size derived from natural sources)
5
7470
37350
... More
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., upto floor five level, excluding the cost of centering, shuttering and finishing
3
10593
31779
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarses and (zoneIII) derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
108
788
85104
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
2
22
44
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
4
143
572
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/ Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 KG /CUM
All works upto plinth level.
5
9729
48645
... More
Concrete of M25 grade with minimum cement content of 330 KG /CUM.
All works above plinth level upto floor V level.
3
10084
30252
... More
Centering and shuttering including strutting, proppingetc. and removal of form for
-
-
-
... More
Foundations, footings, bases of columns, etc. for massconcrete
10
336
3360
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
31
784
24304
... More
Suspended floors, roofs, landings, balconies and access platform
59
996
58764
... More
Edges of slabs and breaks in floors and walls under 20 cm wide
5
225
1125
... More
Walls (anythickness) including attached pilasters, butteresses, plinth and string courses etc.
2
755
1510
... More
Columns, Pillars, Piers, Abutments, Postsand Struts
15
1027
15405
... More
SUBHEAD- IV: STRUCTURAL AND STAINLESS STEEL WORK
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1875
105
196875
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
4886
110
537460
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or Lhooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275 gm/m².
32
1048
33536
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
675
646
436050
... More
SUBHEAD- V: MASONRY WORK
-
-
-
... More
Providing brick masonry with bricks of class designation 7.5 in cement mortar 1:6(1 cement: 6 coarse sand) in superstructure at all levels and locations etc., complete all as per drawing and specifications.
8
9318
74544
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand.
53
1093
57929
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
Cement mortor 1:6 (1 cement : 6 coarse sand)
4
9616
38464
... More
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)
5
7517
37585
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
54
946
51084
... More
SUBHEAD- VI: FINISHING
-
-
-
... More
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
33.6
444
14918.4
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 13.5.11:4 (1 cement: 4 coarse sand)
196.8
408
80294.4
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge
120
571
68520
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1cement: 4 coarse sand)
100
598
59800
... More
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
140
77
10780
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
140
170
23800
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
1950
275
536250
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 SQM over and including priming coat of exterior primer applied @ 2.20 KG/ 10 SQM) Apex Ultimar of Asain/Berger or Equivalent.
280
188
52640
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
552
167
92184
... More
15mm thick plastering in cement mortar 1:6(1 cement: 6 fine sand) on internal surfaces of walls finished smooth and even etc., complete at all levels and locations.
50
433
21650
... More
SUBHEAD -VII : FLOORING WORK
-
-
-
... More
Providing and laying anti skid Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
60.42
1067
64468.14
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
161
1305
210105
... More
Providing and laying Vitrified tiles in floor in different Size of Tile 1000 x 1000 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
363.08
1832
665162.56
... More
Providing and laying Anti Skid Vitrified tiles finish of size 600mm x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
74
1495
110630
... More
Providing and fixing 18 mm thick granite of any colour and shade with area of slab upto 0.50 sqm.gang saw cut, mirror polished granite area of slab over 0.50 Sqm, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
140
5545
776300
... More
Providing edge moulding to 18mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer- in-Charge.Granite work
38
497
18886
... More
25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
10
1896
18960
... More
SUBHEAD -VIII :DOORS & WINDOWS WOOD & PVC WORK
-
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : including ISI marked Stainless Steel butt hinges with necessary screws
58.32
2324
135535.68
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
5.03
5182
26065.46
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:(SINGLE REBATE door frame) Profile C 10.14.2.1Fixing with adjustable lugs with split end tail to each jamb
14.1
642
9052.2
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness.The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
56.55
556
31441.8
... More
Providing and fixing 30 mm thick Fiber glass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
17.55
4368
76658.4
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125mm
35
68
2380
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to Brick wall/column by dash fasteners
160
247
39520
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
200x10 mm
80
96
7680
... More
150X10mm
30
80
2400
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 KG to 80 KG and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
22
957
21054
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etc. Complete.
-
-
-
... More
Twin Rubber stopper
14
70
980
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete (ALDROP)
-
-
-
... More
300x16 mm
14
295
4130
... More
A Providing and fixing factory made uPVC glazed/wiremesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced withgalvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inlines as hadaptor(where ever required) of appropriate dimension, EPDM gasket, hardware,SS304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleevefor fixing frame to finished wall as perIS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners,including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent...
-
-
-
... More
... finished wall shall be filled with weatherproof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements shall be paid seperately.
-
-
-
... More
Three track three panel sliding window with two glazed and one wire mesh panels using R3 series with frame and glazed and fly proof sash with zinc alloy powder coated handle on every glazed panel along with multi point locking system
35
10875
380625
... More
Providing and fixing factory made uPVC white colour fixed glazed ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads ofappropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Using R1 series with frame ( Height upto 0.9m)
5
8248
41240
... More
Providing and fixing 5.0mm thick glass panes (weight not less than 12.50 kg/sqm).
35
2660
93100
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length
-
-
-
... More
15 mm nominal bore
4
95
380
... More
Providing and fixing the following hardware fittings of approved make. a) ISI marked oxidised MS pressed butt hinges with necessary screws etc., complete.
-
-
-
... More
100x58x1.9 mm
28
44
1232
... More
125x65x2.12mm
84
52
4368
... More
Brass CP mortice lock six levers handles of Godrej/ Dorset or equivalent make with necessary screws etc., complete for single door.
10
971
9710
... More
Providing and fixing wire gauge shutters using Galvanised M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws:
-
-
-
... More
35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size using Second class teak wood
26
4714
122564
... More
Deduct for against Item No. 65.01. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.
26
818
-21268
... More
Add for Item No. 59 & Item No. 65.01. Fly proof stainless steel grade 304 wire gauge with 0.5mm dia. Wire and 1.4 mm wide aperture with matching wood beading.
61
1103
67283
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Second class teak wood for hand rail
0.25
139090
34772.5
... More
SUBHEAD -IX : MISCELLEANOUS WORKS
-
-
-
... More
Providing and fixing at all height 12.5mm thick Gypsum board false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 40 mm long with 6 mm dia bolts to the angle hangers of 25 x 25 x0.55 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45 mm x 15 mm x 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick botton wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including...
380
1244
472720
... More
...fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @ 230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting.
-
-
-
... More
Providing and fixing decorative wall paper of approved make, shade and design on wall (plain/ wood grain/ in glossy/ matt / suede finishing) with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S including cost of adhesives, labour and transportation charges.
145
1774
257230
... More
Providing & fixing cast iron baluster for railing inculding shuttering work complete as per direction of Engineer-in-charge.
100
2304
230400
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
60
1529
91740
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
... More
SUBHEAD -X:INTERNAL SANITARY, WATER SUPPLY AND DRAINAGE
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid pastic seat and lid
14
7790
109060
... More
Supplying and fixing wash hand basin suit comprising of : (a) Best quality of vitrious china countertop wash basin of approved make or equivalent including 15mm piller cock,stop cock, waste coupling , bottle trap etc of approved make.
11
15835
174185
... More
Providing and fixing wash basin with C.I. brackets, 15mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and bravkets, cutting and making good the walls wherever required: (a) White Vitreus China Wash basin size 550 x 400 mm with a 15 mm CP Brass stop cock, Pillar cock
3
3854
11562
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
12
952
11424
... More
Supplying and fixing in position best quality CP JAYNAM Brass Towel rack with
lower rail/bar and hooks of length 600mm long with a pair of brackets flanges fixed to wall with necessary plugs screws , washers etc., complete of approved make.
8
2600
20800
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore
3
493
1479
... More
Providing and fixing C.P. brass long Nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore
3
799
2397
... More
providing and fixing Jaquar make long Nose bib cock with wall flange of approved quality code: ALI-CHR-85037
11
3161
34771
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required
-
-
-
... More
Kitchen sink with drain board of 510x1040 mm bowl depth 250 mm
2
6758
13516
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
1565
12520
... More
Providing and fixing UPVC Soil and Waste pipes confirming to IS 4985 (4 KG/SQM) of SWR type jointed with solvent cement/ rubber ring joints and further protected with fiberglass paste. Including all specials such as bends, tees, reducers etc., with or without door as required including any cutting & making good of floors/ walls that may be necessary, clamps and stays as per requirements Make: Supreme, Prince, Sudhakar,Ashirvad, Astral and Finolex.
-
-
-
... More
110 mm dia
20
880
17600
... More
75 mm dia
25
587
14675
... More
Supplying and fixing of the following dia UPVC Vent pipe of approved brand and quality etc., complete. Make: Supreme, Prince, Sudhakar,Ashirvad, Astral and Finolex.
-
-
-
... More
110 mm dia
15
491
7365
... More
75 mm dia
15
718
10770
... More
Supplying and fixing of UPVC cowl for the following dia of approved brand, quality etc., all complete. Make: Supreme, Prince, Sudhakar,Ashirvad, Astral and Finolex
-
-
-
... More
110 mm dia
15
553
8295
... More
75 mm dia
15
524
7860
... More
100 mm inlet x 75 mm outlet.
11
1966
21626
... More
Providing and fixing toilet paper holder: C.P. brass.
14
782
10948
... More
Providing and fixing robe hook of Jaguar make cat no. F5003108 C.P. brass double coat hook
8
668
5344
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15mm nominal bore
8
559
4472
... More
Supply, installation , testing and commissioning of shower unit with Wall Mixer 3-in-1 System with Provisionfor both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall
Flange including over head shower and hand shower.
7
21404
149828
... More
Supplying and fixing of CP Health faucet of Jaquar make CAT NO.573 or equivalent make with 8mm dia and flexible tube wall hook, and angular stop cock etc., complete.
10
1077
10770
... More
Supply and fixing of Best quality Towel Ring Square of Jaguar CAN-CHR 1121N 215 mm long, 200 mm wide with minimum distances of 3 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms
10
2428
24280
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931. 15 mm nominal bore
15
652
9780
... More
Supplying and fixing in position cast iron Nahani traps with CP grating including connection with CI waste pipe including 150mm dia thick CC 1:2:4, for embedding the trap, plastering curing etc.,complete all as specified and directed.
17
1939
32963
... More
SUBHEAD -XI : EXTERNAL WATER SUPPLY AND DRAINAGE
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia Pipes
45
484
21780
... More
25 mm nominal outer dia Pipes
45
610
27450
... More
20 mm nominal dia Pipes
100
523
52300
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
20mm
20
267
5340
... More
25mm
30
346
10380
... More
Supplying, laying, jointing, testing and commissioning; uPVC(SWR) pipe (Type-B) as per IS : 13592/1992 including specials of best quality and approved make fixed to wall/floor including chasing, cutting, making the hole in walls/floors, cutting the pipes to the required size of length jointing the pipes and specials with suitable resin and testing etc.,complete all as specified and directed. (Specials at junctions must have access doors wherever required.)
-
-
-
... More
110 mm dia
85
367
31195
... More
Supplying laying jointing testing and commisioning best quality and approved make glazed stone ware pipesof Grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1cement : 1 fine sand ) including necesary joints if any etc,complete all as specified and directed.
-
-
-
... More
100 mm dia.
30
432
12960
... More
150mm dia
110
677
74470
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 Coarse aggregate: 10 graded stone aggregate 40mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
-
-
-
... More
100 mm diameter S.W. Pipe
35
939
32865
... More
150 mm diameter S.W. Pipe
100
1148
114800
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
10
10075
100750
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : Make: Zoloto,Leaderand Audco India.
-
-
-
... More
25 mm nominal bore
8
606
4848
... More
32 mm nominal bore.
4
671
2684
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
11
33000
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm dia RMT.
13
944
12272
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
7
2635
18445
... More
SUBHEAD -XII : DEMOLISTION/DISMANTLNG
-
-
-
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
12.96
55
712.8
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below
30
357
10710
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area beyond 3 sq. metres
14
489
6846
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
8
109
872
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
50
53
2650
... More
Dismantling tile works in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10mm to 25mm
546.04
71
38768.84
... More
Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead 120 x 120 cm (outside to outside) :
1
1074
1074
... More
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond ministry of defence for all leads including all lifts involved
20
257
5140
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
5.33
1316
7014.28
... More
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar
11.4
2393
27280.2
... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
50
146
7300
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
3.08
2369
7296.52
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
3
2005
6015
... More
Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from the terrace including shilfting at ground level as per direction of Engineer-In-Charge.
3
434
1302
... More
Dismantling of Bib taps, stop cocks, Angle cocks, wall mixers, basin mixers, brass stop cock (Concealed).
47
110
5170
... More
Dismantaling of CI pipes 75mm & 100mm
20
100
2000
... More
Dismantling of cupboards, shutters, shelves etc.
5
50
250
... More
SCHEDULE OF CREDIT ITEMS
-
-
-
... More
Doors, Windows etc including chowkats against item No 109
30
500
-15000
... More
Doors, Windows etc including chowkats against item No 110
14
500
-7000
... More
Stone obtained from Item No. 117
3
75
-225
... More
Aluminium items like windows, Doors, Aluminium partitions , Fixed glazing etc against item No.107
100
15
-1500
... More
GI Pipe of following dia against item No…
-
-
-
... More
15mm obtained from Item No. 118
30
7
-210
... More
20mm obtained from Item No. 118
30
10
-300
... More
25mm obtained from Item No. 118
20
15
-300
... More
Soil CI pipes
-
-
-
... More
75mm obtained from Item No. 123.00
10
150
-1500
... More
100mm obtained from Item No. 123.00
10
200
-2000
... More
Sanitary CP fittings such as Taps, Bib cocks, Pillar cocks, stop cocks, Angle cocks and brass stop cocks (concealled) etc., obtained from Item No. 122
47
100
-4700
... More
Sanitary CP fittings such as Basin mixers, Wall Mixers etc., obtained from Item No. 122
22
180
-3960
... More
PVC Storage Water Tanks
-
-
-
... More
500 Liters obtained from Item No. 121
2
100
-200
... More
1000 Liters obtained from Item No. 121
2
200
-400
... More
Wood items like cubboards, shelf shutters shelves etc., obtained from Item No. 124
5
50
-250
... More
Flushing cisten obtained from Item No. 111
8
50
-400
... More
SUBHEAD-XIII- INTERNAL ELECTRIFICATION
-
-
-
... More
Point Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed heavy class PVC conduit, with modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required including connections to earth terminal removing of the existing point wiring.
-
-
-
... More
(a) One Light point controlled by one 6A Switch
128
1902
243456
... More
(b) Two Light point controlled by one 6A Switch
51
2519
128469
... More
(c) One ceiling fan point controlled by one 6 A Switch and electronic fan regulator of 100W step type with concealed MS Fan hook box.
22
2804
61688
... More
(d) One Exhaust fan point controlled by one 6A Switch
12
1940
23280
... More
(e) One bell point controlled by one bell push
7
2854
19978
... More
Supply and fixing of 6A, 3Pin Socket outlet with 6A switch in Lighting switch boards. (Dependant).
28
821
22988
... More
Supply and fixing of 6A, 3Pin Socket outlet with switch of 6A rating with wiring of 2 Runs of 2.5 Sqmm and 1 Run of 2.5 Sqmm FRLS, PVC insulated multistranded Copper conductor wires run in and including 25 mm Dia, 2 mm thick PVC conduit. (Independant).
53
1953
103509
... More
Supply and Wiring with the following size 1100V grade PVC insulated multistrand FRLS Copper conductor wires in and including suitable size medium gauge PVC conduit concealed in wall / Ceiling including all accessories such as junction boxes, bends, elbows including end terminated with suitable lugs and removing of the unservicebale cables.
-
-
-
... More
(a) 2 runs of 2.5 Sq.mm wires with 1run of 2.5 Sq.mm wire in and including 25 mm Dia PVC Conduit (For Lighting Circuit)
320
298
95360
... More
(b) 4 runs of 6 Sq.mm wires with 2 runs of 6 Sq.mm wires in and including 32 mm Dia PVC Conduit (For Lighting Sub Mains)
220
750
165000
... More
(c) 4 runs of 6 Sq.mm wires with 2run of 6 Sq.mm wire in existing MS/PVC Conduit (For Lighting Circuit)
180
555
99900
... More
Supplying and fixing non rigid metallic PVC conduit 25 mm dia medium grade along with accessories in surface/recess including cutting chases, pinning in, making good to facings where ever required and pointing in cement mortar 1:3 ration to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc; and cutting chases for concealed conduit wiring, making good and painting as required etc, cutting not exceeding 10cm girth. Complete all as specified and directed.
400
153
61200
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the exising surface/recessed steel/PVC conduit as required.
-
-
-
... More
(a) 2 runs x 2.5 Sqmm and 1R x 2.5 Sqmm
620
132
81840
... More
(b) 4 runs x 2.5 Sqmm and 2R x 2.5 Sqmm
580
253
146740
... More
(c) 2 runs x 1.5 Sqmm and 1R x 1.5 Sqmm
320
86
27520
... More
Supplying and fixing suitable size G.I box with modular plate and cover in front or surface or in recess, including providing and fixing 6 pin 15/16A modular socket outlet and 15/16A modular switch, connection etc complete
30
873
26190
... More
Supplying and fixing following size / module G.I box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
(a) 8 Module (125 MM x 125MM)
25
864
21600
... More
(b) 6 Module (100 MM x 75MM)
60
776
46560
... More
(c) 3 Module (75 MM x 75MM)
21
522
10962
... More
Supply, Installation,Testing & Commissioning of the following type LED light fixtures on wall/ Ceiling including all fixing accesssories such as leads, etc complete as required. The fixtures shall be complete with all prewired upto the terminal block. All fixtures shall be supplied with lamps. The Catalogue Numbers refers to Philips Make and taking down of the unservicebale fittings.
-
-
-
... More
(a) 20 W Surface mounted LED 4 Feet Length Luminaire (Philips : BN308C LED40S-6500 L120 PSU WH)
40
1664
66560
... More
(b) 1 x 12 W Surface Mounted LED Luminaire (Philips Cat No : SM250C LED 12S-6500PSU WH)
21
1024
21504
... More
(c) 12 W Recess mounted Down Light Fixture (Philips Cat No DN195B LED20S-6500 PSU WH S2)
21
1366
28686
... More
(d) 33 W EvenGlow 120 LEDs/metre strip light (Each No 5 mtr Length)(Philips model No.582241)
21
1366
28686
... More
(e) 36 W LED Outdoor type light fitting with bracket and accessories (Philips Cat No :BRP046 LED 36 CW MR S1 PSU GR)
15
982
14730
... More
(e) 36 W LED Outdoor type light fitting with bracket and accessories (Philips Cat No :BRP046 LED 36 CW MR S1 PSU GR)
2
3756
7512
... More
5W Foot lamp with modular box and lamp holder (MK Cat no : W26530)
7
1878
13146
... More
(a) 10 W Surface mounted LED 1 Feet Length Luminaire (Mirror lamp)
8
341
2728
... More
Supply, Installation,Testing and commissioning of 1200 mm sweep white colour Ceiling fan with standard down rod (600mm length down rod in false ceiling areas) and all accessories Electrical connections but excluding supply of Fan regulator as required etc. ( BEE Labelled 5 Star Energy Saving Fan ).Taking down of the unservicebale fan.
12
3542
42504
... More
Supply, Installation, Testing and commissioning of 305 mm sweep Exhaust fans with Metallic blades and MS gravity louvers including all accessories / Installation materials required and taking down of the unserviceble exhaust fan.
12
2632
31584
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) including taking down of the unserviceble distribution board. (a) 6 way (8 + 18), Double door
2
4967
9934
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 40A
2
5309
10618
... More
Supplying and fixing of 6A to 32A rating 240/415V,10kA , C Curve miniature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections ,testing and commissioning etc complete. (a) Single Pole
36
352
12672
... More
SUBHEAD-XVII- POWER WIRING
-
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) including taking down of the unserviceble distribution board. (a) 6 way (8 + 18), Double door
2
4967
9934
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
(a) 63A
2
5826
11652
... More
Supplying and fixing of 6A to 32A rating 240/415V,10kA, C Curve miniature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections, testing and commissioning etc complete. (a) Single Pole
36
352
12672
... More
MODULAR POWER SOCKETS Supply,erection,testing and commissioning of the following switch sockets with anodised G.I. Box, front plate and fixing screws etc .
-
-
-
... More
6/16 Amps, 5-pin (250 Volts) single phase modular type socket controlled by 16 Amps SP Switch.
8
1224
9792
... More
Supply and fixing of factory made 25A, 1Ph Metalclad socket with plug top & 25A SPMCB in MS box including all fixing accessories
16
3469
55504
... More
Supply and installations of 25 Liters capacity storage type geysers operating on single phase, 220V, 50 Hz power supply including pipe connections for inlet and outlet etc., complete all as specified.
8
13424
107392
... More
Wiring Supply and Wiring with the following size 1100V grade PVC insulated multistrand, FRLS Copper conductor wires in and including suitable size heavy gauge PVC conduit concealed in wall / Ceiling including all accessories such as junction boxes, bends, elbows including end terminated with suitable lugs.
8
13424
107392
... More
2runs of 4Sq.mm wires with 1run of 4 Sq.mm wire in and including 25mm dia PVC Conduit(For 16A Sockets).
300
356
106800
... More
2runs of 6Sq.mm wires with 1run of 6 Sq.mm wire in and including 25mm dia PVC Conduit(For AC Sockets).
260
497
129220
... More
4 runs of 10 Sq.mm wires with 2 runs of 6 Sq.mm wire in and including 25mm dia PVC Conduit
60
1014
60840
... More
Providing and fixing of maintenance free earthing which consists of 40mm Dia, standrad length (as per Equipment Supplier) electrode capsule, filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Earth enhancing compound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete including excavation in all types of soil.
2
15283
30566
... More
Supply and laying of following size strips including all necessary inter connections with earth station and equipments.
-
-
-
... More
50 X 5 mm Hot dip GI strip
20
316
6320
... More
25 X 5 mm Hot dip GI strip
50
209
10450
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
100
56
5600
... More
Cable Trays Supply and fixing of following size GI Perforated type cable tray made out of 2mm thick G.I sheet including MS supports for fixing the tray, anchor fasteners etc., laid including 2runs of 25x5 GI strip etc including with 2 mm thick GI covers.
-
-
-
... More
100 mm wide x 50 mm Height
24
669
16056
... More
Supply, laying, jointing GI pipes of medium quality including specials of approved make fixed to wall/to the required lengths, threading jointing chasing the walls and floor, making holes, clamping of clamps and making good the same, necessary excavation, etc., complete as specifed and directed. (a) 50mm Dia
10
679
6790
... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V, 4 wire, Free Standing Floor mounted MVpanel made out of 14 SWG MS sheet after seven tankprocess and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves.The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50 KA and consist of the switchgear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same including dismantling and removing of the old unserviceble panel all as directed.
-
-
-
... More
MAIN LT PANEL - 1 - Outdoor Incomer 1 : 1 No of 400 A, 4P. MCCB, 50KA, shall be supplied with S/C,E/F,O/C AND INSTANTANEOUS TRIP RELAY UNIS WITH TIME DELAY SETTINGS. 2A, control fuse - 3 Nos.
RYB indicating lamps - 1 set
Voltmeter (0-500V) with selector switch - 2 set
Ammeter (0-400A) with selector switch - 2 set
400/5A, CL-1, 15VA CT's with resin cast- 3 nos. Outgoing
200A, 4P, 35KA, MCCB, - = 2No
100A, 4P, 35KA, MCCB, - = 2No
63A, 4P, 16KA, MCCB, - = 2No 63 A, 3P, 16KA, MCCB, - = 1 No and also with 20 A SPMCB as outgoings 3 Nos with timer circuit for controlling of street lights and the timer should be with required 24 hors clock settings.
1
258895
258895
... More
Bus Bars : 400A, 3Ph, 4 wire TPN, 50Hz, aluminium bus bars
Metering Instruments; Load Manager in the Incomer and ACB/ MCCB on, off, Trip Indication Lamps and with Breaker Status indication Lamps and also with Phase indication Lamps. Earth Bus; To be provided at the bottom of the Panel of copper.
-
-
-
... More
CREDIT FOR THE FOLLOWING UNSERVICEABLE ITEMS:-
-
-
-
... More
Point Wiring of any description including Switches, sockets, MS Boxes etc obtained against Item No. 138 to 140 & 194 to 195.
375
20
-7500
... More
Sub Main Wiring of any description obtained against Item No. 141 & 143.
2240
5
-11200
... More
Light Fitting of any Model obtained against Item No. 146 to 147 & 196.
230
20
-4600
... More
M.V.Panel obtained against Item No. 170.
1
5000
-5000
... More
Distribution boards of any size obtained against Item No. 150 & 154.
4
200
-800
... More
Supply and laying of 25mm dia, heavy gauge PVC. conduit concealed in wall/ ceiling/ floor including all accessories such as junction boxes, conduit bends, etc., complete as required for Telephone etc.,
150
200
30000
... More
Supply and fixing of Telephone outlet (RJ11) with anodised GI box with front plate and fixing screws.
11
673
7403
... More
Supply and fixing of TV outlet with anodised GI box with front plate and fixing screws.
9
598
5382
... More
Supply and laying of 2pair 0.5mm dia PVC insulated Copper conductor Telephone wire conforming to DOT Specifications in already laid PVC Conduit including necessary interconnections.
400
30
12000
... More
Supplying and drawing co-axial TV Cable RG-6 grade, 0.7mm soild copper conductor PE insulated, shielded with fine tinned copper-braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
200
21
4200
... More
Supply and installation of 10 pair Krone connectors in MS junction box complete as required.
2
872
1744
... More
Supply, laying, jointing GI pipes of medium quality including specials of approved make fixed to wall/to the required lengths, threading jointing chasing the walls and floor, making holes, clamping of clamps and making good the same, necessary excavation, etc., complete as specifed and directed. (a) 50mm Dia
10
679
6790
... More
DIRECT EXPANSION SYSTEM
Supply, Transportation, Installation, Testing and Commissioning of the following Inverter model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor including suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cool, dehumidifying, air circulating and filtering with cooling and condensing units with refrigent gas and 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation and with copper condenser only.
-
-
-
... More
1.5 TR capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5 Makes: Mitsubishi MSGN18VF /OGeneralASGA18JCC/ ToshibaRAS18N3KCV/Blue Star PAFU-DAFU series /Daikin FTKC50NVM / Hitachi / Carrier or their prevailing models with above specifictions.
3
38656
115968
... More
2.0 TR capable of delivering 24000 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5 Makes: Mitsubishi MSGN18VF /OGeneralASGA18JCC/ ToshibaRAS18N3KCV/Blue Star PAFU-DAFU series /Daikin FTKC50NVM / Hitachi / Carrier or their prevailing models with above specifictions.
2
64011
128022
... More
Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of split AC unit.
5
687
3435
... More
Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200V to 250V rated for the following KVA maximum load and time delay model with 16A, 3-way connector/ socket for output and with 3 core flexible chord and 3 pin 6/16A plug top for input suitable for Air-conditioner for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete. Makes : V-Guard/Real Guard/Uni Stab/ITL (a) 4 KVA
5
2060
10300
... More
HVAC [LOW SIDE ITEMS] Supply, installation and testing of the following sizes of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, between indoor and outdoor unit with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp, M.S.hanger, tray etc., as required at site. Makes:Totaline/ Mandav/MexicoThe insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations.
-
-
-
... More
Ǿ6.4 mm
36
919
33084
... More
Ǿ9.5 mm
36
1049
37764
... More
Ǿ12.7 mm
12
1181
14172
... More
Ǿ15.9 mm
12
1439
17268
... More
Supply, installation and testing of UPVC Drain Piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection. Necessary pipe fittings (Including enlarger, bends, T Joints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap. Makes: Ashirvad / Finolex / Waterflo /Sudhakar (a) 25 mm
30
255
7650
... More
Supply, installation,testing and commissioning of pvc insulated armoured copper cable between inddor unit and outdoor unit with supports ,clamping,end terminations,etc.of the following sizes, complete. Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel/RPG / Finolex / V-Guard (a) 4cx2.5sq.mm copper pvc insulated cable
60
187
11220
... More
WATER COOLERS
-
-
-
... More
Supply installation of 40/80 lTRS Capacity Water Coolers with RO water Purifier ,including necessary fittings all as per manufacturers specifications etc., complete
1
44369
44369
... More
Point Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit, with modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required including connections to earth terminal removing of the existing point wiring.
-
-
-
... More
Two Light point controlled by two Way 6A Switch
21
2742
57582
... More
Supply and fixing of 2nos 6A, 3Pin Socket outlet with switch of 2nos 6A rating with wiring of 2 Runs of 2.5 Sqmm and 1 Run of 2.5 Sqmm FRLS, PVC insulated multistranded Copper conductor wires run in and including 25 mm Dia, 2 mm thick PVC conduit. (Independant).
53
2468
130804
... More
Supply, Installation,Testing & Commissioning of the following type LED light fixtures on wall/ Ceiling including all fixing accesssories such as leads, etc complete as required. The fixtures shall be complete with all prewired upto the terminal block. All fixtures shall be supplied with lamps. The Catalogue Numbers refers to Philips Make and taking down of the unservicebale fittings.
-
-
-
... More
(f 1 x 6 W Ultra sleek recessed downlight for low height false ceiling Luminaire (Philips Cat No : DN091B LED6S-6500 PSU WH)
95
939
89205
... More
BUILT-IN-FURNITURE
-
-
-
... More
Providing and fixing of cupboard cum dressing unit of 600mm deep with 4 Nos. openable shutters, two vertical dividers and two shelves made out of 18mm ply wood with 3.5mm thick teak veneer, all exposed edges to have teak wood lipping with melamine polish and limination to internal surfaces etc; all complete as per directions of engineer-in-charge.(Openable shutters and Hardware shall include brass tower bots, 100mm long 'C' type brass/powder coated handles, Magnetic catchers and locks will be paid separately).
7
23054
161378
... More
Providing and fixing Window / Door 'L' Jam made out of 11 mm MDF with 3.5 mm thick teak venear and finish with melamine polish with all neccesary hardware etc all complete.
50
4696
234800
... More
Providing and fixing 75 x 50mm wooden rafter made out of 11mm thick MDF board with 4mm thick teak venear & finish with melamine polish etc.all complete.
25
4645
116125
... More
Providing and fixing Kitchen frame work made out of 70 x 20 mm thick teak wood and shutters to have 18 mm thick plywood and covered with 1mm thick Decorative laminate of approved shade, edges to have teak wood beading and finished with melamine polish etc all complete with all necssary Hardware and fittings etc all complete.
5
9810
49050
... More
Providing and fixing 300mm deep, 600mm high overhead storage units in kitchen with openable shutters and one shelf inside all made with 18mm thick commercial plywood with approved laminate for top, sides,bottom and for shutters and providing 12mm tick commercial plywood for back, 20x4mm teakwood beading for exposed edges with Melamine polish, handles, etc all complete as directed by engineer-in-charge.
15
12984
194760
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%