Defence Research And Development Organisation Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Defence Research And Development Organisation - DRDO Tender
Education And Training Services
Coronavirus COVID 19
Eprocure
Opening Date26 Dec 2018
Closing Date16 Jan 2019
Tender Amount₹ 4,12,02,000
Costs
EMD
₹ 8,24,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_DRDO_423184_1Bid Award Id
ViewTender No
83521/CIV/ATR/CONTender Authority
Defence Research And Development Organisation ViewPurchaser Address
-Website
http://https://www.drdo.gov.in/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
... More
Ordinary rock
69
-
1
... More
Hard rock (blasting prohibited)
139
-
1
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
316
-
1
... More
Supply of good earth i/c loading , unloading and stacking at site by mechanical transport from outside the MOD land .
-
-
-
... More
locally available earth
247
-
1
... More
Credit for hard rock from excavated rock
98
-
1
... More
SUBHEAD - II ANTITERMITE TREATMENT
-
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
... More
Chlorpyriphos/Lindane emulsifiable concentrate of 20%
161
-
1
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)
-
-
-
... More
Along external wall where the apron is not provided using
chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
136
-
1
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Manufacture coarse sand) to match the existing floor:
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
259
-
1
... More
SUBHEAD - III PLAIN AND REINFORCED CEMENT CONCRETE.
-
-
-
... More
Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level
-
-
-
... More
1:4:8 (1 Cement : 4 Manufacture coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
50
-
1
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
... More
1:2:4 (1 Cement : 2 Manufacture coarse sand : 4 graded stone aggregate 20 mm nominal size).
4
-
1
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 Manufacture coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
20
-
1
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
6
-
1
... More
Centering and shuttering including strutting, propping etc. and removalof form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
154
-
1
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
439
-
1
... More
Suspended floors, roofs, landings, balconies and access
platform
546
-
1
... More
Lintels, beams, plinth beams, girders, bressumers and
cantilevers
592
-
1
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
473
-
1
... More
Stairs, (excluding landings) except spiral-staircases
66
-
1
... More
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
53
-
1
... More
Edges of slabs and breaks in floors and walls
-
-
-
... More
Under 20 cm wide
179
-
1
... More
Weather shade, Chajjas, corbels etc., including edges
46
-
1
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
... More
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
525
-
1
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
30449
-
1
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
All works upto plinth level.
67
-
1
... More
All works above plinth level upto floor V level.
201
-
1
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
81
-
1
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 Manufacture coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
112
-
1
... More
SUBHEAD - IV STONE & BRICK MASONRY
-
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Manufacture coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 Manufacture coarse sand)
39
-
1
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 Manufacture coarse sand)
225
-
1
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
... More
Cement mortar 1:4 (1 cement :4 Manufacture coarse sand)
103
-
1
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
103
-
1
... More
SUBHEAD -V: PLASTERING AND SURFACE TREATMENT
-
-
-
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement : 6 fine sand)
895
-
1
... More
15 mm cement plaster on the rough side of single or half brick wall of mix
-
-
-
... More
1:6 (1 cement : 6 fine sand)
670
-
1
... More
6mm cement plaster of mix:
-
-
-
... More
1:3 (1 cement : 3 fine sand)
990
-
1
... More
Neat cement punning
82
-
1
... More
Cement plaster 1:3 (1 cement: 3 Manufacture coarse sand) finished with a floating coat of neat cement.
-
-
-
... More
20mm cement plaster
46
-
1
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
14
-
1
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 Manufacture coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 Manufacture coarse sand) finished rough with sponge.
1355
-
1
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1739
-
1
... More
White washing with lime to give an even shade :
-
-
-
... More
New work.(three or more coats )
546
-
1
... More
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
-
-
-
... More
Two or more coats on new work
1739
-
1
... More
Finishing walls with Premium Acrylic Smooth exterior paint of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.67 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
1630
-
1
... More
Applying priming coat :
-
-
-
... More
With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
65
-
1
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
155
-
1
... More
Providing & fixing chicken wire mesh at the junctions of RCC and brick work, 100mm overlapping on both sides with all necessary hardware etc., complete.
375
-
1
... More
SUBHEAD -VI FLOORING
-
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 Manufacture coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
144
-
1
... More
Providing and laying Ceramic glazed floor tiles (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as white, Ivory, Grey, Fume, Red Brown, laid on 20mm thick cement mortar 1:4 ( 1cement : 4 Manufacture coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
-
-
-
... More
Size300x300mm
26
-
1
... More
Size 395 x395mm
140
-
1
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse
sand), including grouting the joints with white cement and matching pigments etc., complete.
Make
-
-
-
... More
Size of Tile 600x600 mm
130
-
1
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 Manufacture coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Size of Tile 600x600 mm
15
-
1
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 Manufacture coarse sand (Manufactured)) :
-
-
-
... More
25 mm thick
199
-
1
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 Manufacture coarse sand (Manufactured)) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
90
-
1
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
215
-
1
... More
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.5 metre.
208
-
1
... More
SUBHEAD -VII ROOFING
-
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
-
-
-
... More
Applying a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
... More
Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 Manufacture coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 Manufacture coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge.
-
-
-
... More
Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 Manufacture coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
-
-
-
... More
The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 120mm and minimum thickness at khurra as 65 mm.
290
-
1
... More
Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371
respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturer's
specifications and as approved by Engineer-In-Charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., washing with water all complete. The contractor shall give guarantee for the perfomance of SRI and also the durabitity of coating, all complete as per direction of Engineer-in-Charge.
165
-
1
... More
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including unplasticised - PVC moulded fittings/accessoriesto IS : 13592 Type jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. Inclusive of all fittings.
-
-
-
... More
110 mm diameter
69
-
1
... More
Providing 50 mm dia G.I. Spout set in cement mortar 1 : 3 (1 cement : 3 Manufacture coarse sand) complete.
2
-
1
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,
-
-
-
... More
the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
145
-
1
... More
SUBHEAD -VIII STEEL,ALUMINIUM & WOOD WORK
-
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
-
-
-
... More
Profile C
-
-
-
... More
Fixing with adjustable lugs with split end tail to each jamb.
43
-
1
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
25
-
1
... More
Providing and fixing to existing door frames.
-
-
-
... More
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
9
-
1
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
16
-
1
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
16
-
1
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
145
-
1
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
745
-
1
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of
Engineer-in-charge.
-
-
-
... More
Prelaminated particle board with decorative lamination on both sides.
15
-
1
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 4.0 mm thickness
59
-
1
... More
With float glass panes of 5.0 mm thickness
15
-
1
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
-
-
-
... More
Powder coated minimum thickness 50 micron aluminium.
72
-
1
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
... More
With Stainless Steel cover plate minimum 1.25 thickness
2
-
1
... More
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
4
-
1
... More
Providing and fixing 12mm thick frameless toughened glass door shutter / Partition of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittingsall complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
40
-
1
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
16
-
1
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
1
-
1
... More
250x16 mm
26
-
1
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
200x10 mm
28
-
1
... More
150x10 mm
60
-
1
... More
100x10 mm
110
-
1
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
54
-
1
... More
100 mm
72
-
1
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Twin rubber stopper
28
-
1
... More
Providing and fixing of rubber nylon door buffer (dia of 40mm and 50mm long) on wall with rawl plug and screws etc; complete.
28
-
1
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
Fixed to openings / wooden frames with rawl plugs (designation 10 No.) etc., all complete
870
-
1
... More
SUBHEAD - IX STRUCTURAL STEEL WORK
-
-
-
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
448
-
1
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1005
-
1
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
-
-
-
... More
M.S. tube
300
-
1
... More
SUBHEAD -X : SANITARY SERVICES
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
5
-
1
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Flat back wash basin size 550x
400 mm with single 15 mm C.P. brass pillar tap
5
-
1
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
5
-
1
... More
Providing & fixing in position C.P. brass twin coat hook including cutting necessary C.P. brass screws complete.(Jaquar model no. 1191N/approved equivalent).
5
-
1
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
... More
15 mm nominal bore
5
-
1
... More
Providing and fixing white vitreous china urinal of appx. size 610x410x380mm Hindware Model no 60002 /approved equivalent) with push type urinal flushing arrangement(Jaquar model no. 077 /approved equivalent)including fixing to wall with suitable brackets all as per manufacturers specification & direction of Engineer-in charge with standard size C.P.brass flush pipe,spreader with unions & clamps(all in CP brass)including painting of fittings, cutting and making good the walls and floors where required.
4
-
1
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
5
-
1
... More
Providing and fixing 100mm C P brass grating for gully trap.
15
-
1
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
... More
Granite Stone of approved shade
2
-
1
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
5
-
1
... More
Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineerin- charge.
5
-
1
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
5
-
1
... More
Providing & fixing uPVC floor traps with extention piece of required lenth with solvent cement joint with CP heavy duty grating. Making proper connection,cutting chase / hole in floors /slabs and bringing the same in proper condition and shape after placing the trap in right position complete as required
-
-
-
... More
110 mm inlet and 110 mm outlet.
5
-
1
... More
Providing and fixing uPVC pipes 6Kg/cm2 (IS: 4985) including all fittings (plain or door) e.g. bends on any angle, sockets, junction, cowls, offsets, access pieces, jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors where required and making good the same. (for Soil, Waste pipe)
-
-
-
... More
110 mm diameter
50
-
1
... More
Providing and laying 75mm thick (Average) cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) alround uPVC soil and waste pipe under floor.
11
-
1
... More
Providing and fixing uPVC pipes confirming to IS 4984-1995 including all fittings, cutting and making good the walls etc. (for waste connection).
-
-
-
... More
40 mm outer dia
5
-
1
... More
50 mm outer dia
4
-
1
... More
Providing and fixing G.I. Inlet fitting of suitable size with 2 & 3 Nos. G.I. Socket 32 & 40 welded G.I. pipe and dipped in hot bitumen complete in all respect.
-
-
-
... More
100 mm diameter pipe (Hopper )
5
-
1
... More
Providing and fixing square mouth SW gully trap class SP-1 complete with CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg. as per standard design.
-
-
-
... More
180x150mm size P type
-
-
-
... More
with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
5
-
1
... More
Providing and fixing M.S. stays and clamps for uPVC /sand cast iron/centrifugally cast (spun) iron pipes of diameter:
40
-
1
... More
110 mm diameter
-
-
-
... More
SUBHEAD -XI : WATER SUPPLY
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..
-
-
-
... More
Internal work - Exposed on wall
-
-
-
... More
20 mm nominal outer dia Pipes
8
-
1
... More
25 mm nominal outer dia Pipes
30
-
1
... More
32 mm nominal outer dia Pipes
30
-
1
... More
40 mm nominal outer dia Pipes
50
-
1
... More
50 mm nominal outer dia Pipes
8
-
1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia Pipes
10
-
1
... More
20 mm nominal outer dia Pipes
25
-
1
... More
25 mm nominal outer dia Pipes
50
-
1
... More
Providing and fixing brass stop cock of approved quality complete.
-
-
-
... More
15 mm nominal bore
4
-
1
... More
20 mm nominal bore
4
-
1
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
... More
25 mm dia nominal bore
5
-
1
... More
32 mm dia nominal bore
4
-
1
... More
40 mm dia nominal bore
1
-
1
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
-
-
-
... More
20mm nominal bore
4
-
1
... More
25mm nominal bore
4
-
1
... More
32mm nominal bore
4
-
1
... More
40mm nominal bore
4
-
1
... More
Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931 a) 15 mm nominal bore. (Jaquar model no. FLR-5053 N /approved equivalent).
-
-
-
... More
15 mm nominal bore
19
-
1
... More
Providing and fixing uplasticised PVC connection pipe with brass unions:
-
-
-
... More
15mm nominal bore with 45cm length
19
-
1
... More
Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement amd making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2000
-
1
... More
SUBHEAD -XII : AREA DRAINAGE
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and\ disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil
50
-
1
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
... More
Ordinary rock
17
-
1
... More
Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level
-
-
-
... More
"1:2:4 (1 cement : 2 Manufacture coarse sand (zone-III) : 4 graded stone
aggregate 20 mm nominal size).
8
-
1
... More
1:3:6 (1 Cement : 3 Manufacture coarse sand (zone-III): 6 graded stone
aggregate 40 mm nominal size).
18
-
1
... More
Centering and shuttering including strutting, propping etc. and removalof form for all heights :
-
-
-
... More
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
18
-
1
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Manufacture coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 Manufacture coarse sand)
45
-
1
... More
15 mm cement plaster 1:3 (1 cement: 3 Manufacture coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
160
-
1
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
40
-
1
... More
Providing and placing in position 100mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes,of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick ,100mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage ,all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
75
-
1
... More
SUBHEAD -XIII INTERNAL ELECTRIFICATION.
-
-
-
... More
Primary Light points
28
-
1
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required
-
-
-
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
30
-
1
... More
Two way switch point:
5
-
1
... More
Wiring for twin control light point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Supplying, fixing, testing & commissioning suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
37
-
1
... More
Supply, fixing, testing & commissioning suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2Nos X 5 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
8
-
1
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
16
-
1
... More
Supplying, fixing, testing & commissioning of following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required.
7
-
1
... More
1 or 2 Module (75mmX75mm)
-
-
-
... More
(Exhaust fan Wiring) - Supply and Wiring with 2 runs of 1100 V grade 1.5sq.mm ISI Marked FRLS insulated multi strand copper conductor wires conforming to IS : 694 (with latest amendments) in 25 mm dia, heavy gauge FRLS PVC conduits concealed in wall /column/ ceiling/ floor including supply and fixing of 1No 6Amp single pole modular type switch in anodized box, FRont plate and earthing with 1.5sq.mm multi strand FRLS insulated wire run continuously along the conduit including supply of all fixing materials accessories and inter- connections complete as required i.e. starting from Switch Board till Exhaust Fan terminal.
9
-
1
... More
Supply of Light Fixtures
-
-
-
... More
Supply testing & commissioning of following type LED light fixtures light with all required fixing accessories & wiring from Ceiling rose to Fixture.
-
-
-
... More
10W MIRROR LIGHT MAKE-PHILLIPS CAT NO. BN021 LED 10S- 6500 PSU GR S1
5
-
1
... More
6.5W BULKHEAD LIGHT MAKE-PHILLIPS CAT NO. WT140 LED 7S CW PSU PC
11
-
1
... More
19W LED Batten Light MAKE-PHILLIPS CAT NO. BN108C LED 20S PSU CDL WH
7
-
1
... More
15W LED SURFACE MOUNTED MAKE-PHILLIPS CAT NO. SM251C LED 16S- 6500 PSU WH
19
-
1
... More
31W LED RECESSED MOUNTED LUMINAIRES MAKE-PHILLIPS CAT NO. RC380B LED36S-6500 G4 L60 W60
16
-
1
... More
15W LED Downlighter MAKE-PHILLIPS CAT NO. DN194B LED15S-6500 PSU WH S1
15
-
1
... More
Installation of light fixtures
73
-
1
... More
Fans
-
-
-
... More
Supply of 1200 mm sweep Ceiling fan with standard down rod, all accessories Electrical connections. Including fixing materials required.
16
-
1
... More
Assembling,Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 em) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
16
-
1
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
25
-
1
... More
Supply of 305 mm sweep heavy duty exhaust fan with louvers, all accessories Electrical connections. Including all required material etc., complete with all required accessories etc.,complete.
9
-
1
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm sweep
9
-
1
... More
Supply & fixing of Cable Management system of size 105mm x 50mm including all jointing laying accessories suitable for fixing of Power sockets Outlets etc.(LEGRAND MAKE)
5
-
1
... More
Distribution Boards
-
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way (2 + 4), Double door
4
-
1
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
SINGLE POLE
32
-
1
... More
Triple pole
2
-
1
... More
Supplying and fixing following rating,double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40A
4
-
1
... More
Run of Mains
-
-
-
... More
Supply and wiring for with the following size1100 V grade FRLS insulated multi strand copper conductor wires/cables conforming to IS 694 (with latest amendments) in suitable size heavy gauge PVC conduit concealed in wall/ Ceiling and Insulated multi strand copper earth wires as specified run continuously along the conduit including supply of all fixing materials and accessories interconnections complete as required.
-
-
-
... More
3- runs of 1.5 Sq mm Copper flexible multi strand wires in heavy gauge FRLS PVC conduit ( Lighting ckt) with all required accessories etc complete
1100
-
1
... More
3- runs of 2.5 Sq mm Copper flexible multi strand wires in heavy gauge FRLS PVC conduit (6A Raw power sockets & Lighting circuits from DB to Switch Board) with all required accessories etc complete
555
-
1
... More
SUBHEAD -XIV AIR CONDITIONER
-
-
-
... More
Supply installation testing and commissioning of split system air conditioners inverter type rating having one indoor and one outdoor unit each electric driven, operated at 220 volt, 50 Hz, single phase AC power supply with remote control etc. including copper tubing of size of 3/8" with 5/8" nitrile rubber insulation over the copper tubing tied with taping of suitable materials and PVC drain pipe , copper cale etc as per standard norm with all complete as approved by Engineer-in-Charge.
-
-
-
... More
2.0TR Capacity
12
-
1
... More
Supply and Providing and fixing of pre fabricated MS stand of outdoor condensing unit.
12
-
1
... More
Supply installation testing and commissioning of following copper tubing of size of with nitrile rubber insulation over the copper tubing tied with taping of suitable materials etc with all required accessories etc complete as per direction of Engineer-in-Charge.
-
-
-
... More
5/8"
25
-
1
... More
3/8"
25
-
1
... More
Supply, Installation, Testing and Commissioning of CPVC (Chlorinated Poly Vinyl Chloride) pipes condensate drain piping insulated using 9 mm thick nitrile rubber tubes including fitting and supports as per the specifications and approved drawings.
-
-
-
... More
Ø 25 mm
25
-
1
... More
Supply and fixing of following size PVC insulated unsheathed bright annealed bare copper conductor multicore industrial cable of voltage up to 1100V.
-
-
-
... More
3C x 2.5 Sqmm
50
-
1
... More
SUBHEAD -XV POWER WIRING
-
-
-
... More
Supply and fixing of modular type 16A 6pin shuttered type Socket with 16A switch of modular type with front plate and anodised GI box including all fixing accessories.
30
-
1
... More
Supply and fixing of modular type single phase 25A 3 Pin socket with 25A switch with front plate and anodized GI box including all fixing accessories complete as required
12
-
1
... More
INDUSTRIAL SOCKETS
-
-
-
... More
Supply and fixing of factory made 20A Metalclad socket with Plug top and 20A SPMCB in MS box including all fixing accessories.
1
-
1
... More
Supplying, instalation,testing , commissioning of 32 amps, 415 volts, TPN metal clad socket with 3 pole and earth, metal enclosed plug top alongwith 32 amps "C" curve, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
1
-
1
... More
Supplying, instalation,testing , commissioning of 63 amps, 415 volts, TPN metal clad socket with 3 pole and earth, metal enclosed plug top alongwith 63 amps "C" curve, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
1
-
1
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way (4 + 18), Double door
5
-
1
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
SINGLE POLE
78
-
1
... More
Triple pole
4
-
1
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 n1A in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
63A 30 kA 4Pole
2
-
1
... More
40 A, 30 kA 4Pole
2
-
1
... More
Run of Mains
-
-
-
... More
Supply and wiring for with the following size1100 V grade FRLS insulated multi strand copper conductor wires/cables conforming to IS 694 (with latest amendments) in suitable size heavy gauge PVC conduit concealed in wall/ Ceiling and Insulated multi strand copper earth wires as specified run continuously along the conduit including supply of all fixing materials and accessories interconnections complete as required.
-
-
-
... More
3- runs of 2.5 Sq mm Copper flexible multi strand wires in heavy gauge FRLS PVC conduit ( Lighting circuits from DB to Switch Board) with all required accessories etc complete
350
-
1
... More
3- runs of 4 Sq mm Copper flexible multi strand wires in heavy gauge FRLS PVC conduit (General Raw Power 16A/25A Sockets) with all required accessories etc complete
630
-
1
... More
3- runs of 6 Sq mm Copper flexible multi strand wires in heavy gauge FRLS PVC conduit (32A Sockets) with all required accessories etc complete
50
-
1
... More
6runs of 6sq.mm wires in suitable size PVC Conduits (for pDBs) with all required accessories etc complete
75
-
1
... More
6runs of 10sq.mm wires in suitable size PVC Conduits (for PDBs) with all required accessories etc complete.
50
-
1
... More
SUBHEAD -XVI SHOP ELECTRICALS
-
-
-
... More
MV Panels
-
-
-
... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted MV panel made out of 14SWG(2mm) thick CRCA sheet for main frame and 2mm thick partitions and Gland Plate of 3mm thick after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only and shall be as per detailed specifications.
-
-
-
... More
The PCC shall have at least two spare cubicles. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely. All ACBs shall be provided with Digital type Ammeter of suitable range along with CTs. All ACBs shall be provided with ON/ OFF Push Buttons, ON/ OFF/ TRIP LED Type indication lamps and shunt trip coils. All MCCB/ACBs of rating 160A and above shall be with Micro processor releases and All MCCBs below 160A shall be with adjustable thermal and magnetic based releases(Up to 25KA, Magnetic releases shall be fixed type). All MCCBs shall be with spreader links and rotary handle. All breakers shall be over load & short circuit releases with Icu=100% Ics. All CTs/CBCT shall be resin cast type. All Controlling wiring shall be with FRLS cables, all bus bar sleeves shall be with Heat shrinkable kits.
-
-
-
... More
Main Building panel (SOURCE END BUILDING PANEL) OUTDOOR TYPE
1
-
1
... More
Incoming : 1000A, 50KA 4Pole Electrically operated drawout type ACB with Micro Processor releases for O/L,S/C ,U/V and earth fault - 1 set from transformer
-
-
-
... More
Incoming : 100A, 35KA 4Pole Motorized MCCB with Micro Processor releases for O/L,S/C ,U/V and earth fault - 1 set from DG set
-
-
-
... More
Interlocking system with Bus coupler 100 amp Motorized MCCB based on Micro Processor
-
-
-
... More
Busbars : 1000A TPN Aluminium Busbars - 1 set
-
-
-
... More
Outgoings :
-
-
-
... More
400A 35KA 4P MCCBs – 1no
-
-
-
... More
320A 35KA 4P MCCBs – 2no
-
-
-
... More
250A 35KA 4P MCCBs – 2no
-
-
-
... More
63A 25KA 4P MCCBs – 4no
-
-
-
... More
40 A 16KA 4P MCCBs – 4no
-
-
-
... More
320A 35KA 4P MCCBs – 1no Spare only
-
-
-
... More
250A 35KA 4P MCCBs – 1no Spare only
-
-
-
... More
63A 25KA 4P MCCBs – 1no Spare only
-
-
-
... More
40 A 16KA 4P MCCBs – 1no Spare only
-
-
-
... More
Metering For Incomer :
-
-
-
... More
Metering:
-
-
-
... More
0-500V Digital Voltmeter with selector switch and MCB Control with Digital KWH meter- 2 sets.
-
-
-
... More
0-1000A Digital Ammeter with resin cast CTs of ratio 1000-500/5A Class 1Accuracy and 15VA burden and selector switch -2 sets.
-
-
-
... More
0-1000A resin cast CTs of ratio 1000-500/5A Class 1 Accuracy and 15VA burden and selector switch - 2 no. For APFCR
-
-
-
... More
Digital Power Factor Meter-2 sets
-
-
-
... More
LED Phase indication lamps with individuals MCBs and control with toggle switches- 2 sets
-
-
-
... More
Main Building panel (TARGET END PANEL) OUTDOOR TYPE
1
-
1
... More
Incoming : 160A, 35KA 4Pole Motorized MCCB with Micro Processor releases for O/L,S/C ,U/V and earth fault - 1 set from transformer
-
-
-
... More
Incoming : 160A, 35KA 4Pole Motorized MCCB with Micro Processor releases for O/L,S/C ,U/V and earth fault - 1 set from DG set
-
-
-
... More
Interlocking system with Bus coupler 160 Amp Motorized MCCB
-
-
-
... More
Busbars : 160A TPN Aluminium Busbars - 1 set
-
-
-
... More
Outgoings :
-
-
-
... More
100A 25KA 4P MCCBs – 1no
-
-
-
... More
63A 25KA 4P MCCBs – 4no
-
-
-
... More
40 A 16KA 4P MCCBs – 4no
-
-
-
... More
63A 25KA 4P MCCBs – 1no Spare only
-
-
-
... More
40 A 16KA 4P MCCBs – 1no Spare only
-
-
-
... More
Metering For Incomer :
-
-
-
... More
Metering:
-
-
-
... More
0-500V Digital Voltmeter with selector switch and MCB Control with Digital KWH meter- 2 sets.
-
-
-
... More
0-160A Digital Ammeter with resin cast CTs of ratio 160/5A Class 1Accuracy and 15VA burden and selector switch -2 sets.
-
-
-
... More
0-160A resin cast CTs of ratio 160/5A Class 1 Accuracy and 15VA burden and selector switch - 2 no. For APFCR
-
-
-
... More
Digital Power Factor Meter-2 sets
-
-
-
... More
LED Phase indication lamps with individuals MCBs and control with toggle switches- 2 sets
-
-
-
... More
APFCR Panel (25 KVAR)
1
-
1
... More
Incomer
-
-
-
... More
1 No. 100 Amp 35 kA 415 volt grade TP with neutral link complete with Thermal Magnetic release having overload protection, short circuit protection with
-
-
-
... More
Square flush mounting 0-100 Amp ammeter with 3 way and OFF selector switch.
-
-
-
... More
Square flush mounting voltmeter 0-500 volt with 3 way and OFF selector switch.
-
-
-
... More
1 Set of phase indication lights
-
-
-
... More
Set of TP&N Aluminium Conductor Bus-bars 400A. (35 KA)
-
-
-
... More
Outgoings :
-
-
-
... More
5 sets of 16 A TP MCCB 25KA with 5 Nos 25 A TP capacitor duty - contactor with 230 V A.C. supply & 5 No. 5 KVAR TP shunt capacitor with D-tunned reactor complete.
-
-
-
... More
1 No. 5 step APFCR Intelligent Digital Relay with binary operation without time delay.
-
-
-
... More
5 Sets self illuminated Red-Green (ON-OFF) push buttons.
-
-
-
... More
1 No. Selector switch for auto-off-manual.
-
-
-
... More
On/Off Ind.Light
-
-
-
... More
Timer
-
-
-
... More
Aux. Contactor
-
-
-
... More
5 nos.Square flush mounting 0-16 Amp Ammeter with 3 way and OFF selector switch. For each capacitor unit.
-
-
-
... More
Note: Each Capacitor Bank shall have the following : ON/OFF Indication lamps, Ammeter with CTs and selector switch Auto/ Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation. All contactors & Capacitors shall be heavy duty type. The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
APFCR Panel (215 KVAR)
1
-
1
... More
Incomer
-
-
-
... More
1 No. 400 Amp 35 kA 415 volt grade TP with neutral link complete with Thermal Magnetic release having overload protection, short circuit protection with
-
-
-
... More
Square flush mounting 0-400 Amp ammeter with 3 way and OFF selector switch.
-
-
-
... More
Square flush mounting voltmeter 0-500 volt with 3 way and OFF selector switch.
-
-
-
... More
1 Set of phase indication lights
-
-
-
... More
Set of TP&N Aluminium Conductor Bus-bars 400A. (35 KA)
-
-
-
... More
Outgoings :
-
-
-
... More
4 sets of 100A TP MCCB 25KA with 8 Nos 70A TP capacitor duty - contactor with 230 V A.C. supply & 8 No. 25 KVAR TP shunt capacitor with D-tunned reactor complete.
-
-
-
... More
2sets of 63A TP MCCB 25KA with 8 Nos 70A TP capacitor duty - contactor with 230 V A.C. supply & 8 No. 20KVAR TP shunt capacitor with D-tunned reactor complete.
-
-
-
... More
4sets of 63A TP MCCB 25KA with 8 Nos 70A TP capacitor duty - contactor with 230 V A.C. supply & 8 No. 15 KVAR TP shunt capacitor with D-tunned reactor complete.
-
-
-
... More
1sets of 40A TP MCCB 25KA with 1 Nos 32 A TP capacitor duty - contactor with 230 V A.C. supply & 1 No. 10 KVAR TP shunt capacitor with D-tunned reactor.
-
-
-
... More
1sets of 40A TP MCCB 25KA with 1 Nos 32 A TP capacitor duty - contactor with 230 V A.C. supply & 1 No. 5 KVAR TP shunt capacitor with D-tunned reactor.
-
-
-
... More
1 No. 12 step APFCR Intelligent Digital Relay with binary operation without time delay.
-
-
-
... More
12 Sets self illuminated Red-Green (ON-OFF) push buttons.
-
-
-
... More
1 No. Selector switch for auto-off-manual.
-
-
-
... More
On/Off Ind.Light
-
-
-
... More
Timer
-
-
-
... More
Aux. Contactor
-
-
-
... More
4 nos.Square flush mounting 0-100 Amp Ammeter with 3 way and OFF selector switch. For each capacitor unit.
-
-
-
... More
6nos.Square flush mounting 1-63 Amp Ammeter with 3 way and OFF selector switch. For each capacitor unit.
-
-
-
... More
2nos.Square flush mounting 1-40 Amp Ammeter with 3 way and OFF selector switch. For each capacitor unit.
-
-
-
... More
MV Cables
-
-
-
... More
Supply, laying and commissioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor under ground cable, on cable tray/ through GI Pipe with all installation materials. The cable shall conform to IS 7098/ Part I.
-
-
-
... More
3.5C X 300 sq.mm Aluminium Armoured cable
-
-
-
... More
Supply
40
-
1
... More
Laying in Trench/tray
40
-
1
... More
3.5C X 240 sq.mm Aluminium Armoured cable
-
-
-
... More
Supply
150
-
1
... More
Laying in Trench/tray
150
-
1
... More
3.5C X 185 sq.mm Aluminium Armoured cable
-
-
-
... More
Supply
40
-
1
... More
Laying in Trench/tray
40
-
1
... More
3.5C X 120 sq.mm Aluminium Armoured cable
-
-
-
... More
Supply
30
-
1
... More
Laying in Trench/tray
30
-
1
... More
3.5C X 95 sq.mm Aluminium Armoured cable
-
-
-
... More
Supply
30
-
1
... More
Laying in Trench/tray
30
-
1
... More
3.5C X 50 sq.mm Aluminium Armoured cable
-
-
-
... More
Supply
190
-
1
... More
Laying in Trench/tray
190
-
1
... More
3.5C X 25 sq.mm Aluminium Armoured cable
-
-
-
... More
Supply
130
-
1
... More
Laying in Trench/tray
130
-
1
... More
4c x16sqmm Al Armoured cable
-
-
-
... More
Supply
100
-
1
... More
Laying in Trench/tray
100
-
1
... More
Providing indoor ordinary end terminations for the cable specified above with compression type steel gland, Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc., including end termination.
-
-
-
... More
3.5C X 300 sq.mm Aluminium Armoured cable
4
-
1
... More
3.5C X 240 sq.mm Aluminium Armoured cable
4
-
1
... More
3.5C X 185 sq.mm Aluminium Armoured cable
2
-
1
... More
3.5C X 120 sq.mm Aluminium Armoured cable
2
-
1
... More
3.5C X 95 sq.mm Aluminium Armoured cable
2
-
1
... More
3.5C X 50 sq.mm Aluminium Armoured cable
6
-
1
... More
3.5C X 25 sq.mm Aluminium Armoured cable
4
-
1
... More
4c x16sqmm Aluminium Armoured cable
4
-
1
... More
Earthing
-
-
-
... More
Providing maintenance free Earth station with consisting of 40mm dia pipe standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs. Bentonite compound (as per equipment supplier) upto a depth of 2.0meters around the electrode capsule. Brick chamber & CI Cover complete.
8
-
1
... More
Supplying and laying of bare GI/ CU tape off the following earthing clamped to wall with suitable clamps saddles and fixing bolts/soldering /riveting in ground including the cost of digging and back filling as required and complete as required to comply with IS 3043:1987. All joints shall be tined.
-
-
-
... More
25 X 6mm GI strip
40
-
1
... More
50 X 6mm GI strip
50
-
1
... More
8 SWG GI Wire
300
-
1
... More
Supply and installation of following sizes 2 mm thick, 50 mm depth GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall/ceiling etc. complete.
-
-
-
... More
150mm W x 50mm H
15
-
1
... More
100mm W x 50mm H
30
-
1
... More
SUBHEAD -XVII TELEPHONE/LAN Conduiting
-
-
-
... More
Supplying and fixing of following modular type sockets housed in GI boxes recessed in walls/ partition / paneling for telephone/ computer/ TV cable socket outlets with all required accessories etc complete.
-
-
-
... More
Telephone sockets
9
-
1
... More
Modular GI box and cover plate
9
-
1
... More
Supplying and fixing of telephone CRONE CONNECTOR in wall with adequate knockouts including chase cutting and making the surface good with all required accessories etc complete.
-
-
-
... More
iv) 10 Pair
4
-
1
... More
Supply and laying of following pair 0.5mm dia Jelly filled armoured copper conductor Telephone cable in shaft existing cable tray with all fixing accessories. The cable shall be as per the DOT specifications.
-
-
-
... More
10pair
300
-
1
... More
Supplying and drawing following 2 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required with all required accessories etc complete.
150
-
1
... More
FRLS PVC conduits
-
-
-
... More
Supply and laying of following size FRLS PVC conduits heavy guage concealed in wall/ ceiling/ floor/ column including supply and drawing of 12SWG GI wire as fish wire for laying of Telephone at a later stage and supply of all fixing materials like junction boxes, bends, elbows, Ceiling rose, batten holders, solvent complete as required with all required accessories etc complete.
-
-
-
... More
32mm Dia
20
-
1
... More
25mm Dia
70
-
1
... More
Supply, fixing, testing and commissioning of LAN outlet (RJ45) with anodised GI box with front plate and plug in type socket with all required accessories etc complete.
9
-
1
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required with all required accessories etc complete.
150
-
1
... More
Supply and laying of mm dia. Class "B" GI pipes laid 600mm below ground level including excavation, back filling etc. complete as required.
10
-
1
... More
SUBHEAD XVIII: SPECIAL EARTHING
-
-
-
... More
Providing maintenance free Earth station with consisting of 65mm dia pipe standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs. Bentonite compound (as per equipment supplier) upto a depth of 2.0meters around the electrode capsule. Brick chamber & CI Cover complete.
8
-
1
... More
ii) Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
50
-
1
... More
Surge Protection Device:
-
-
-
... More
Supply of Class B/Type I Single Phase Surge Protection Devices as per IEC 62305-4 and tested according to IEC 61643 – 11, DIN Rail mountable with Maximum Continuous Operating Voltage of 320 V and Voltage Protection Level of 1.3 kV (L-N). Response Time should be less than 100 ns (L-N & N-PE). The maximum impulse test current should be 65 kA (10/350 µs) per pole and 100 kA (10/350 µs) neutral to protective earth. The surge protection devices shall be enclosed in polycarbonate enclosure of IP 65 rating. Make: JMV
1
-
1
... More
Supply of Class C/Type II Single Phase Surge Protection Devices as per IEC 62305-4 and tested according to IEC 61643 – 11, DIN Rail mountable with Maximum Continuous Operating Voltage of 320 V and Voltage Protection Level of 1.3 kV (L-N). Response Time should be less than 25 ns per pole and less than 100 ns between neutral to protective earth. The maximum impulse discharge surge current should be 40 kA (8/20 µs) per pole and 60 kA (8/20 µs) neutral to protective earth. The surge protection devices shall be enclosed in polycarbonate enclosure of IP 65 rating. Make: JMV
3
-
1
... More
SUBHEAD XIX LIGHTNING PROTECTION
-
-
-
... More
Providing maintenance free Earth station with consisting of 40mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs. Bentonite compound upto a depth of 2.0meters as per IS around the electrode capsule. Brick chamber & CI Cover complete as per IS .(Dismantling of Existing Al Strips,Vertical Air terminals and handover to department) with all required accessories etc complete.
16
-
1
... More
Supply and laying of following size strips including all necessary inter connections between earth station and equipment supports for strips as applicable ie PCC Cubes/Pedastals placed below strips as applicable with all required accessories etc complete.
-
-
-
... More
a) 32X 5mm Aluminium strip with DMC Insulated Supports
100
-
1
... More
b) 25 X5mm GI strip laid with DMC insulator
200
-
1
... More
c)50X6mm GI strip
200
-
1
... More
Providing and fixing of lightning conductor finial, made of 40 mm dia 300 mm long, G.l. tube, having single prong at top, with 85 mm dia 6 mm thick G.l. base plate including holes,with copper sphere on top of the pipe with all required accessories etc. complete as required with all required accessories etc complete.
18
-
1
... More
SUBHEAD XX WATER COOLERS
-
-
-
... More
Supply,installation,testing and commissioning of storage water cooler with storage capacity of 16 liters and cooling capacity of 16 liters with hot/ cool water outlet suitablle for operation on 230 v + 10% 50HZ, etc, complete. Make : Water cooler : Voltas/Blue Star/Usha Water Purifier : Eureka Forbes/Kent/ION exchage Stabilizer : Keeline/V-guard
2
-
1
... More
Supply,installation,testing and commissioning of 3-Stage Water Purification. Ultra based on a 3-stage advanced filtration process combination of Sediment Filter, Activated Carbon Filter for additional protection from bacteria and UV Disinfection to provide drinking water free from all micro-organisms, thus making it 100% safe. Make - euraka forbes / Aqua guard or Equavalent
2
-
1
... More
SUBHEAD XXI ROAD & HARDSTANDING
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10
sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
... More
All kinds of soil
445
-
1
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
... More
Ordinary rock
1780
-
1
... More
Hard rock (blasting prohibited)
2225
-
1
... More
Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling.
-
-
-
... More
With road roller/ hand roller
6405
-
1
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
965
-
1
... More
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :
-
-
-
... More
On W.B.M. @ 0.75 Kg / sqm.
2880
-
1
... More
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.
-
-
-
... More
40/50 mm compacted thickness with bitumen of grade VG-30 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
145
-
1
... More
Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level
-
-
-
... More
1:4:8 (1 Cement : 4 Manufacture coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
355
-
1
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using Manufacture coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting, mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately)Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
-
-
-
... More
Cement concrete prepared with batch mixing machine.
530
-
1
... More
Providing and laying Polythene sheet (400 micron thick) confirming to IS :2508 antifriction layer on the sub base course complete as per specifications.(Overlaps at joints of pvc sheet should be 100 mm wide )
3525
-
1
... More
Providing 5mm wide and 15mm deep joints in rigid pavements, first 5mm portion filled with polysulphide sealent and remaining portion with foam and tape etc. all complete.
705
-
1
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
-
-
-
... More
450 mm dia RCC pipes.
70
-
1
... More
600 mm dia RCC pipes..
30
-
1
... More
Credit of Hard Rock
1558
-
1
... More
SUBHEAD XXII EXTERNAL WATER SUPPLY
-
-
-
... More
Geological Survey by specialist Agencies and submitting the report for number of poit surved and yield available
5
-
1
... More
Drilling and developing of 61/2 inch dia Bore Wells by DTH method in any type of soil, Conducting yield test as per V Notch method and submission of yield report, including filling of filter media clamps, MS Cover etc., complete.
-
-
-
... More
0-60 mtrs
120
-
1
... More
61-100 mtrs
80
-
1
... More
101-200 mtrs
200
-
1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
100
-
1
... More
Providing HDPE pipe PE-80 grade (12.5 kg/ sq.cm) of 63 mm OD for bore wells.
400
-
1
... More
Supply, erection, testing and commissioning of 3 Cu.m/hr at 70 m head submersible pump set 3Phase-415V, 50 Hz, 2 HP/ 12 stages, 2900 rpm as approved by Engineer in charge at site.
2
-
1
... More
Supply, erection, testing and commissioning of Gun metal Check valve (Non return valve PN-10) conforming to IS 778 with screwed ends type with bolts, nuts and rubber insertions etc., complete and of following sizes:
-
-
-
... More
50 NB
4
-
1
... More
Supply, erection, testing and commissioning of Brass / GM / Bronze Air Release valves with threaded ends of following sizes:
-
-
-
... More
25 NB
5
-
1
... More
Supply, erection, testing and commissioning of pressure gauges with range of 0-10 bar along with isolation cock and pipe for bore wells.
2
-
1
... More
Supply, Installation, testing & commissioning of weather proof type box (IP-65) made out of 2 mm thick CRCA sheet including painting with epoxy powder coating outdoor panel consisting of 1nos- 125 Amps TPN MCCB as incomer with spread links & 3 no's (2 W+1 Spare) of 32 Amps TPN MCCB as outgoing with spread links along with following metering (Voltmeter, Ammeter, CTs) complete. The box shall be mounted on suitable angle frame work on PCC pedestal.
0-500V Digital Voltmeter with selector switch.
0-125A Digital Ammeter with resin cast CTs of ratio 125/5A Class 1Accuracy and 5VA burden and selector switch.
LED Phase indication lamps with individuals MCBs and control with toggle switches.
1
-
1
... More
Supply, installation, testing and commissioning of weather proof type box (IP-55) made out of 2 mm thick CRCA sheet including painting with epoxy powder coating. The box shall be consisting of star-delta starter suitable for 3 Cu.m/hr and 200 meters head pump motor with MPCB, contactor, overload relay, ON/ OFF push button. ON/ OFF/ TRIP indications. Ammeter with resin cost Cts and selector switch, Voltmeter with selector switch. The box shall be suitable for terminating suitable cable. The box shall be mounted on suitable angle frame work of 450 mm height on a PCC pedestal including all materials, complete.
2
-
1
... More
Providing maintenance free Earth station with consisting of 40 mm dia pipe standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5 mtrs. Bentonite compound (as per equipment supplier) upto a depth of 2.0 meters around the electrode capsule. Brick chamber & CI Cover complete.
4
-
1
... More
Supply and laying of following size strips including excavation and refilling of each when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and equipments.
-
-
-
... More
25 x 5 mm hot dip galvanized iron strip
20
-
1
... More
8 SWG GI Wire
20
-
1
... More
Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m in All kinds of soils
-
-
-
... More
Pipes, cables etc. not exceeding 80 mm dia.
150
-
1
... More
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m:
-
-
-
... More
Pipes, cables etc. not exceeding 80 mm dia. in Ordinary Rock
30
-
1
... More
Pipes, cables etc. not exceeding 80 mm dia. in Hard Rock (Blasting Prohibited)
20
-
1
... More
Supply, Laying, testing and commissioning of Medium grade G.I. Pipes conforming to IS 1239 Part - I including all necessary fittings etc., complete for sizes
-
-
-
... More
65 NB (Borewell to sump)
100
-
1
... More
50NB (Borewell)
100
-
1
... More
40NB (Borewell to sump)
50
-
1
... More
32NB
100
-
1
... More
25NB
50
-
1
... More
Supply, Erection, testing and commissioning of Cast Iron Butterfly valves (Wafer type) (PN-10) above nd upto 50mm dia with necessary flanges, bolts, nuts etc., and gun metal gate valves from 40mm dia and below
-
-
-
... More
65NB (GM Gate Valve)
4
-
1
... More
50NB (GM Gate Valve)
4
-
1
... More
40NB (GM Gate Valve)
2
-
1
... More
32NB (GM Gate Valve)
2
-
1
... More
25NB (GM Gate Valve)
1
-
1
... More
Constructing of Valve Chamber of size 750 x 750 x 1000mm deep comprising of 230mm thick brick walls in cement mortar 1:5 over a bed of 150mm thick PCC 1:4:8 alround beyond the masonry faces plastered with CM 1:3 mixed with approved water proofing compound as per manufacturer's specifications, 13mm thick on internal, external, top surfaces, finished smooth with a floating coat of neat cement, providing and fixing painted light duty double seal CI frame and cover of size 600 x 450mm weighting not less than 52 kgs conforming to IS 1726 with locking arrangements, fixing the frame in RCC 1:2:4 including fabrication, form work, curing etc., complete all as specified and directed.
2
-
1
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
1
-
1
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) :Vertical
2
-
1
... More
Supply, laying and commissioning of following size 1.1KV grade PVC insulated flexible Copper conductor in the bore with all installation materials. The cable shall conform to IS 694
-
-
-
... More
3C x4sqmm (copper ), pvc Flat Water proof cable.
420
-
1
... More
SUBHEAD XXIII EXTERNAL ELECTRIC SUPPLY
-
-
-
... More
11KV 3-Breaker panel
-
-
-
... More
Supply, installation, Testing and commissioning of 11KV 350MVA OUTDOOR Type HT Vacuum Circuit Breaker(VCB) Three Panels board consisting of number of Breakers as given below. The VCBs shall be with Motorised Spring Charging (110V DC) mechanism and shall be as per detailed specifications. All VCBs shall have auxilary Relays and Annunciation as specified in Technical specifications. The Closing & Tripping Coils shall be suitable for 110V DC Supply operation, Over current & earth Fault relays as specified in Drawing. All VCBs shall have provision for Remote On/Off and for Remote On/Off Indications wired upto a terminal block. Surge arrestors of 9KV, 5KA shall be provided as part of HT VCBs. Bus PTs shall be provided for each bus Sections. The panel shall consist of suitable rating TP Copper busbar (at the rating of 1.2A/Sq.mm). The VCB Panel shall be suitable for expansion on both sides. Dimensions of Existing VCB Panel with respect to the proposed VCBs to be Checked..
-
-
-
... More
800A VCBs (Three panel board) with Ammeter with CTs, Load Manager with RS 485 with Modubus connectivity, Numerical type Overload & Earth Fault relay, Auxilary Relays for Bucholtz's Alarm & Trip and Oil/ Winding temperature alarm & Trip, Phase Indication Lamps, Breaker On/ Off/ Trip and Spring Charge, trip circuit healthy Indications-2nos (As Transformer Controlling Breakers).
2
-
1
... More
Supply & Installation, testing and commissioning of 630 KVA,3 phase, 50 Hz Outdoor type copper wound, delta/star connected (vector group-DYN 11), oil immersed, naturally oil cooled (ONAN), core type Distribution transformer with no load voltage ratio of 11000/433 Volts and with on Load Tap Changer in step of 2.5% from (+5%) to (-15%) on HV side eight Nos. tape and nine position complete with RTCC panel & locking device. The transformer shall be suitable for operation at a temperature of 50 /55deg C and shall be supplied with suitable neutral ternimal on LT side and all accessories such as lifting lugs,breather, Buchholz's relay with alarm and trip contacts, magnetic oil guage, air release valve, oil conservator, dial type temperature indicator, H.T cable box on HT and earthing terminals, explosion vent, drain valve with plug inclusive of first filling of oil as per IS 335 ( with latest amendents), diagram and rating plate & marshalling box. The transformer shall conform to IS 1180 (LEVEL II) in all respects like insulation levels, temperature rise, impendence voltage and losses. (SOURCE END BUILDING).
1
-
1
... More
Supply & Installation, testing and commissioning of 75 KVA, 3 phase, 50 Hz Outdoor type copper wound, delta/star connected (vector group-DYN 11), oil immersed, naturally oil cooled (ONAN), core type Distribution transformer with no load voltage ratio of 11000/433 Volts and with on Load Tap Changer in step of 2.5% from (+5%) to (-15%) on HV side eight Nos. tape and nine position complete with RTCC panel & locking device. The transformer shall be suitable for operation at a temperature of 50 /55deg C and shall be supplied with suitable neutral ternimal on LT side and all accessories such as lifting lugs,breather, Buchholz's relay with alarm and trip contacts, magnetic oil guage, air release valve, oil conservator, dial type temperature indicator, H.T cable box on HT and, earthing terminals, explosion vent, drain valve with plug inclusive of first filling of oil as per IS 335 ( with latest amendents), diagram and rating plate & marshalling box. The transformer shall conform to IS 1180 (LEVEL II) in all respects like insulation levels, temperature rise, impendence voltage and losses.
(TARGET END).
1
-
1
... More
CONTROL CABLE
-
-
-
... More
Supply and laying of XLPE insulated and PVC sheathed 1100V armoured copper conductor control cable in existing duct/pipes/tray etc. as required as per technical specifications.
-
-
-
... More
4C x 1.5 Sqmm
20
-
1
... More
10C x 1.5 Sqmm
20
-
1
... More
14C x 1.5 Sqmm
30
-
1
... More
19C x 1.5 Sqmm
30
-
1
... More
Provding end terminations for the cable specified below with Double compression type gland, Copper lugs using crimping tool, Insulation tape, Identification tags etc. including end termination.
-
-
-
... More
4C x 1.5 Sqmm
4
-
1
... More
10C x 1.5 Sqmm
4
-
1
... More
14C x 1.5 Sqmm
4
-
1
... More
19C x 1.5 Sqmm
4
-
1
... More
Supply, laying, testing and commissioning of under mentioned size aluminium conductor XLPE 11 KV (E) cable in ground including excavation, sand cushioning, PCC Block protection covering and refilling the trench, removal of surplus earth etc. as per specifications as required.
-
-
-
... More
3C x 95 Sqmm
-
-
-
... More
Supply & Laying in ground.
700
-
1
... More
Supply & Laying in trench.
30
-
1
... More
Supply and making End termination, connection and commissioning for indoor / outdoor type under noted size Aluminium conductor XLPE 11 KV (E) cable on H.T. switchgear / transformer cable box including supply and installation of heat shrinkable type jointing kit, cable lugs etc. as required.
-
-
-
... More
3C x 95 Sqmm (Indoor).
6
-
1
... More
3C x 95 Sqmm (Outdoor).
2
-
1
... More
Supply and making straight through joint with heat shrinkable jointing kit complete with all accessories including Al. lugs and other jointing materials for 3C x 95 sqmm size of pvc insulated & XLPE sheathed/ aluminium conductor cable of 11KV grade, etc. as reqd.
2
-
1
... More
Supply, installation, testing and commissioning of 30KVA SILENT Outdoor Diesel Generator set radiator cooled type suitable for of 415V, 3 phase 4 wire, 0.8 pf. (lagging) 50c/s A.C supply complete with engine (1500 RPM) and alternator DG Set controller with accessories including residential type silencer, DG Set shall have Acoustic enclousere and SS bellow for DG set and fuel service tank (internal) as per standard capacity, battery and battery charger with all associated accessories, including AMF PANEL standard set of tools and anti-vibration mounting pads, MCCB. Regulator through inbuilt AVR, digital governing + protective function. DG Must have these Equipment & Function .
All AVR must have DROOP CT. All AVR must have voltage regulation from remote(through Digital Input / Analoge input/J1939).
All Governor must have speed -PCC-3 regulation from remote (through Digital Input / Analoge input/J1939).
Or in brief All genset must have Synchronization Facility.
(SOURCE END BUILDING).
1
-
1
... More
Supply, installation, testing and commissioning of 62.5KVA SILENT Diesel Outdoor Generator set radiator cooled type suitable for of 415V, 3 phase 4 wire, 0.8 pf. (lagging) 50c/s A.C supply complete with engine (1500 RPM) and alternator DG Set controller with accessories including residential type silencer,DG Set shall have Acoustic enclousere and SS bellow for DG set and fuel service tank (internal) as per standard capacity, battery and battery charger with all associated accessories, including AMF PANEL standard set of tools and anti-vibration mounting pads, MCCB. Regulator through inbuilt AVR, digital governing + protective function. DG Must have these Equipment & Function .
All AVR must have DROOP CT. All AVR must have voltage regulation from remote(through Digital Input / Analoge input/J1939).
All Governor must have speed -PCC-3 regulation from remote(through Digital Input / Analoge input/J1939).
Or in brief All genset must have Synchronization Facility.
(TARGET END).
1
-
1
... More
Supply and Fixing of MS Exhaust Pipe of suitable size for 30KVA DG sets cladded with 50mm thick Glass wool insulation covered with 24SWG Aluminium sheet and provided with rain cap.
15
-
1
... More
Supply and Fixing of MS Exhaust Pipe of suitable size for 62.5KVA DG sets cladded with 50mm thick Glass wool insulation covered with 24SWG Aluminium sheet and provided with rain cap.
15
-
1
... More
Supply, fabrication and installation of M.S. Structural Steel supports for exhaust pipe, fuel pipe etc. including supply and applying of enamel paint of approved shade after one coat of steel primer of reputed company.
200
-
1
... More
Earthing For DG Body
-
-
-
... More
Providing maintenance free Earth station with consisting of 40mm dia pipe standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs. Bentonite compound (as per equipment supplier) upto a depth of 2.0meters around the electrode capsule. Brick chamber & CI Cover complete.(for HT panel , Transformer & DG SET body earth)
12
-
1
... More
Earthing for DG Neutral
-
-
-
... More
Providing maintenance free Earth station with consisting of 65mm dia pipe standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs. Bentonite compound (as per equipment supplier) upto a depth of 2.0meters around the electrode capsule. Brick chamber & CI Cover complete.(Transformer & DG SET neutral earth)
8
-
1
... More
Supply Installation of of GI Strip of Size 50x6 to connect earth pit with DG sets & transformer . All Accessory should be supply along with Strip. Supply of SS nut, bolt and washer should supply with strip as per drawing & required .
30
-
1
... More
Supply Installation of of copper Strip of Size 25x6 to connect earth pit with DG sets . All Accessory should be supply along with Strip. Supply of SS nut, bolt and washer should supply with strip as per drawing & as required.
30
-
1
... More
Supply Installation of of copper Strip of Size 50x6 to connect earth pit with Transformer . All Accessory should be supply along with Strip. Supply of SS nut, bolt and washer should supply with strip as per drawing & as required.
30
-
1
... More
SUBHEAD XXIV : SEWAGE DISPOSAL
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidated each deposited layer by ramming, watering, etc. and disposing of surplus excavated soils directed, within a lead of 50m.
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc. exceeding 80mm dia. but not exceeding 300 mm dia.
80
-
1
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidated each deposited layer by ramming, watering, etc.stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m.
-
-
-
... More
Ordinary rock :
-
-
-
... More
Pipes, cables etc. exceeding 80mm dia. but not exceeding 300 mm dia.
40
-
1
... More
Hard rock (blasting prohibited)
-
-
-
... More
Pipes, cables etc. exceeding 80mm dia. but not exceeding 300 mm dia.
40
-
1
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete:
-
-
-
... More
150 mm dia. R.C.C. pipe
160
-
1
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 Manufacture coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
-
-
-
... More
150 mm diameter S.W. pipes
80
-
1
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 Manufacture coarse sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design:
-
-
-
... More
150 mm diameter S.W. pipe
80
-
1
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 coarse sand(Zone-III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
-
-
-
... More
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets:
-
-
-
... More
With common burnt clay FPS (non moduler) bricks of class designation 7.5
5
-
1
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 Manufacture coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 Manufacture coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 Manufacture coarse sand : 8 graded stone aggregrate 40mm nominal size ) inside palstering 12 mm thick with cement mortar 1:3 (1 Cement : 3 Manufacture coarse sand) finished with floating coat of neat cement & making channels in cement concrete 1:2:4(1 Cement : 2 Manufacture coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:
-
-
-
... More
Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg)
-
-
-
... More
With common burnt clay FPS (non moduler) bricks of class designation 7.5
8
-
1
... More
Inside size 120x90cm and 90cm deep including C.I. cover with frame (medium duty) 500mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)
-
-
-
... More
With common burnt clay F.P.S(non moduler) bricks of class designation 7.5
4
-
1
... More
Extra for depth for manholes
-
-
-
... More
Size 90x80 cm
-
-
-
... More
With common burnt clay FPS (non moduler) bricks of class designation 7.5
1
-
1
... More
Size 120x90cm
-
-
-
... More
With common burnt clay FPS (non moduler) bricks of class designation 7.5
1
-
1
... More
Supply, lowering & installation of RCC readymade hume pipe septic tank of approved make at suitable location as directed including excavation, back filling, sewer line connections at inlet & outlet, inspection chambers, etc. complete as standard design and as directed.
.
-
-
-
... More
25 users
4
-
1
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
4
-
1
... More
SUBHEAD XXV External Lighting
-
-
-
... More
Supplying and erection in position GI pipe 3.5M long fabricated with 65mm Indian class B-GI pipe with with base plate of size 300mm x 300mm x 6mm as per drawing and specific icfication including supply and erection of cement concrete foundation of size (450x450x800mm ) 1:2:4 with coller & excavation & refilling of earth and pole to be painted with one coat of redoxide and two coat of enamel paint of approved shade etc. as required.
18
-
1
... More
Supplying and fixing of 36 Watt LED - lamp with holder complete post top with driver with pot optic reflector including connection with 3x1.5 Sqmm single core PVC insulated copper conductor cable form junction box to fixture as requiredwith all reqiured accessories etc. complete.
18
-
1
... More
Supply and fixing of 5W LED Single Aviation Light including all fixing accessories.
2
-
1
... More
Providing of Spiral coil earthing with 8 SWG GI wire including spreading of salt and charcoal as per IS 3043/87 with latest amendments complete as required.
18
-
1
... More
Supplying and fixing 40mm dia 500 mm long Gi pipe on the pole for cable entry to junction box as required.
18
-
1
... More
Supplying and fixing of 146x238x111( KVPC -) polycarbonate thermoplastics enclosure-junction Box -with I.P. - 65- protection - with Cable hinged cover of approved design complete having gasket of internally embedded- & made of polyeutherene & should be weather proof, rust proof, dust proof, water proof- box, shall be tested as per -IEC-60670-2/60670-22 . The box shall have self threaded holes & provision for mounting din rail. with 2 nos. cable gland Including supplying & fixing crimping 2 Nos. lugs, & 1 nos. 32A connector 6 way for looping the incoming and outgoing cables and also connection of the street light one 6A SP MCB including connection of 2x6/ sq.mm cable etc. as required.( Make- Hensel)
18
-
1
... More
MV Cables
-
-
-
... More
Supply, laying and commissioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor under ground cable, in built up cable trench/ already laid RCC hume pipe or on cable tray/ through GI Pipe/Pole/wall with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 25mtr.interval and also at the turnings. The cable shall conform to IS 7098/ Part I.
-
-
-
... More
4C X 6 Sq.mm armoured aluminium conductor
-
-
-
... More
Supply & Laying in ground
150
-
1
... More
Supply & Laying in RCC Hume pipe
30
-
1
... More
2C X 6 Sq.mm armoured aluminium conductor
-
-
-
... More
Supply & Laying in ground
350
-
1
... More
Supply & Laying in RCC Hume pipe
30
-
1
... More
Providing Indoor ordinary end terminations for the cable specified above with compression type steel gland, Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc.,
-
-
-
... More
4C X 6 Sq.mm
22
-
1
... More
2C X 6 Sq.mm
24
-
1
... More
Supply, Installation, testing and commissioning of following outdoor type Feeder Pillar with relevant IP 54 and suitable for 415 volts, 3 phase, 4 wire and 50HZ AC power supply totally enclosed compartmentalized, fabricated with 2 mm thick sheet, complete with aluminium bus bars (both for main and neutral), incoming/outgoings, cable terminations, inter-connections, indication lamps, pedestal frame on RCC foundation/platform of 300 mm height above GL, necessary earth connections conforming to relevant IS codes, specification and drawings. - FP-SL-1
-
-
-
... More
Incoming
-
-
-
... More
32 4P MCB - 25KA-1no
-
-
-
... More
Bus bar
-
-
-
... More
63A, 415V, 3ph, 4wire AL Bus bar
-
-
-
... More
Outgoing
-
-
-
... More
20A-DP MCB - 10 KA - 2 nos
-
-
-
... More
1 No-25 Amps TPN MCB - 10KA- with & Time switch with contactor& controlling of 6no 10 amps TP MCB of 10KA
4
-
1
... More
SUBHEAD XXVI CHAIN LINK FENCING
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and\ disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil
335
-
1
... More
Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level
-
-
-
... More
1:4:8 (1 Cement : 4 Manufacture coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
60
-
1
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
... More
1:2:4 (1 Cement : 2 Manufacture coarse sand : 4 graded stone aggregate 20 mm nominal size).
50
-
1
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Manufacture coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 Manufacture coarse sand)
285
-
1
... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
4685
-
1
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of
Engineer-in-charge.
-
-
-
... More
Made of G.I. wire of dia 4 mm
1260
-
1
... More
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
-
-
-
... More
Flush/ Ruled pointing
630
-
1
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
150
-
1
... More
SUBHEAD XXVII ARBORICULTURE
-
-
-
... More
TREE PLANTATION
-
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavatedearth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts ofstacked volume of earth after reduction by 20% : 1 part of stacked volumeof manure after reduction by 8%) flooding with water, dressing includingremoval of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
-
-
-
... More
Holes 1.2 m dia and 1.2 m deep
850
-
1
... More
Holes 0.90 m dia and 0.90m deep
150
-
1
... More
Supply and stacking of the following well developed,healthy,true to variety/type plants/Trees having minimum height as below mentioned at site work.
-
-
-
... More
Supply and stacking of Bauhinia blakeana (Kachnar) plant of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
300
-
1
... More
Supply and stacking of Cassia siamea plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
250
-
1
... More
Supply and stacking of Peltophorum species plant of height 150-165 cm.in big poly bags of size 25 cm as per direction of the officer-in-charge.
300
-
1
... More
Supply and stacking of Ficus benjamina (green) plant of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
100
-
1
... More
Providing and displaying of Areca Palm plant , having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
50
-
1
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water).
-
-
-
... More
Trees Plant
1000
-
1
... More
e) Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.
1000
-
1
... More
Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
-
-
-
... More
Trees for 250 no/(up to 4 & up to 3 year Slow & Fast growing Per tree group)
1000
-
1
... More
SHRUB PLANTATION (SOLO)
-
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts ofstacked volume of earth after reduction by 20% : 1 part of stacked volumeof manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost ofmanure, sludge or extra good earth if needed to be paid for separately) :
-
-
-
... More
Holes 60cm dia and 60cm deep
150
-
1
... More
Supply and stacking of the following well developed,healthy,true to variety/type plants having minimum height as below mentioned at site work.
-
-
-
... More
Supply and stacking of plant Hibiscus rosasinensis of height 60-75 cm.with 5-6 branches in p.bag of size 25 cm as per direction of the officer-in-charge.
50
-
1
... More
Supply and stacking of plant Mussaenda rythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge.
50
-
1
... More
Supply and stacking of plant Tabernaemontana coronaria (Chandni single) variegated of height 60-75 cm, 5-6 branches in p.bags of size 25 cm as per direction of the officer-in-charge.
50
-
1
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water).
-
-
-
... More
Shrubs Plant
150
-
1
... More
Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.
150
-
1
... More
Complete maintenance of shrub(out side of lawn area), jobs like making of basin at regular interval i/c watering,weeding,prunning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
150
-
1
... More
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
90
-
1
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
181
-
1
... More
SUBHEAD XXVIII FURNITURE
-
-
-
... More
HIGH BACK CHAIR
-
-
-
... More
Supplying and placing in position, High back chair (Model -Kareena High Back of 'GODREJ' or approved equivalent) of seat size 510mm (W) x480mm (H) and back size 480mm(W) x760mm(H). The seat and back made of 12mm thick hot pressed plywood, the seat and back upholstered with fabric and moulded polyurethane foam of density not less than 45 kg/cum & hardness load 16 kgf. The ply and foam provided in back should designed with contoured lumber support for comfortable seating posture.
1
-
1
... More
The armrest top made of injection moulded from polyurethane (PU) and mounted on drop lift adjustable MS tubular armrest support with five step mechanism of height adjustable 65mm in 5 steps and swivel adjustment of 22 degree on both sides. The backrest should consist up down sliding mechanism, which should adjust within the range of 75mm and locked in 4 positions for correct position of lumber support. The chair should have pneumatic height adjustment feature with adjustment stroke 90mm.
-
-
-
... More
The Chair should have 360 degree revolving and single point control mechanism, the seat should tilt upto 12 degree, seat-back tilt ratio should be 1:2, the front pivot for tilt with feet resting on ground ensuring more comfort. The tilting tension adjustment should be 4-position locking with anti-shock mechanism. Seat depth adjustment of 60 mm and can be locked in 6 position. The pedestal made of chromium plated CR steel, and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal should have 660mm pitch center dia (760 mm with castors) etc.
-
-
-
... More
MIDIUM BACK CHAIR
-
-
-
... More
Providing and placing in position, Mid back chair of Make: Godrej or equivalent model of Steel Case , Vitra, Herman Miller . The seat & back are made up of 12mm thick hot pressed plywood, upholstered with fabric & moulded with Polyurethane foam together with moulded ABS seat and back covers. The back foam should designed with contoured lumbar support for extra comfort. Mid back size 475 mm Width x580 mm height and seat size 470 mm Width x480 mm. The polyurethane foam should be moulded with density 45 kg/m3 and hardness 16 +/2 kg on hampdem machine at 25% compression. Armrest are injection moulded from black copolymer polypropylene. The mechanism should be fixed 360 degree revolving type, Upright position locking, tilt tension adjustment, seat back tilting ratio 1:3. The pneumatic height adjustment has an adjustment stroke of 12 cm. The pedestal should be injection moulded in black 33% glass filled in nylon 66 with 5 nos twin wheel castors. The pedestal should be 66.3 cm pitch-center dia.
48
-
1
... More
Superior Sofa made out of 50 X 30 mm thick hard wood internal frame for seat and back and 100 X 30 mm for arm rest, flat nylon mixed rubbrised newar strips on seat & back, cladded with high density rubber foam and 100 mm thick loose cushion on seat, 75 mm thick cushion on back duly upholstered with approved quality of fabric/leathrite
-
-
-
... More
Single Seater ( Size 700 x 700 x740 )
4
-
1
... More
Centre Table of following sizes made out of teak wood frame, side with 70 X 25 mm teak wood and 45 X 45 mm teak wood decorative legs, including 20 X 20 mm teak wood moulding all exposed surfaces with two or more coat spirit polish including wood filler
4
-
1
... More
Table office clerk
20
-
1
... More
Laminated Working Table - Supplying and placing in position, Working table (Model -Enterprise of 'GODREJ' or approved equivalent) of size 1350W x 680 D x 735H, whose work surface is made of 18mm thick. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edge banding. The modesty panel is made of 18mm thick. Pre Laminated Particle Board (PLB) All work surface edges are duly
-
-
-
... More
sealed with 2mm thick PVC Edge banding. The rectangular frame is fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coated (Epoxy polyester). The leg is Fabricated component in 38mm x25mm x1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester).The leveler glide for leg is Nylon 6 & MS Bolt. The shell and drawer tray are made of 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).The drawer front is 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester) and frame assembly is 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). KBPT and CPU trolley is also included with table.
-
-
-
... More
Total in Figures
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements