Command Area Development Authority Tender

1.15.2 Vol.1 - Earth work excavation In ordinary/soft rock without blasting for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and depth exceeding 1.5 m, but not exceeding 3 m including cost of labour, tools, usage of machinery & other appurtenaces required to Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

1.15.3 Vol.1 - Earth work excavation In ordinary/soft rock without blasting for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and Depth exceeding 3m, but not exceeding 4.5m including cost of labour, tools, usage of machinery & other appurtenaces required to Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

2.1.3 Vol.1 - Providing and laying in position cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

2.4.1 Vol.1 - Providing and laying in position cement concrete Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

2.11(h) Vol.1 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, Bonding,hooking,laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

2.3.2 Vol.1 - Providing and laying in Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

12.12 Vol.2 - Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

12.51 Vol.2 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

12.15 Vol.2 - Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

8.34.1 Vol.2 - Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

8.41 Vol.2 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

12.59 Vol.2 - Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

12.60 Vol.2 - Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc.Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

12.62 - Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

12.61 vol 2 - Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

11.36.2 Vol.2 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge: Prelaminated particle board with decorative lamination on one side and balancing lamination on other side including cost of materials, labour, usage charges of machinery Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

11.3.9 Vol.5 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI pipe of 100mm dia etc. Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

11.3.7 Vol.5 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI pipe of 65mm dia etc. Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

13.53 Vol.2 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

13.33.2 Vol.2 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal dia Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints External work Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

432 Vol.2 - Providing H.P. or L.P. ball valve with polythene floats: 25 mm dia Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

580 Vol.5 - Providing Multijet water meter 25 mm dia Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

15.23 Vol.2 - Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance properties, seals shrinkage cracks up to 0.4 mm width, capable of preventing water dampness & seepages, Water permeability is Nil confirms to BS EN 12390 Part 8: 2000. Powder to water mixed at a ratio (5:2) 5 parts powder and 2 parts water, applied @ 1.5kg/m2 in 2 coats to achieve 1.0mm DFT on a cleaned surface free from all loose materials etc., The finished cost to include surface preparation completely as per specification. Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

2.84.1 Vol.5 - Flow control Valve 5LPM/10LPM/15LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball /1/2" [15mm] including cost of all materials, labour charges, HOM and testing Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

7.17 Vol.2 - Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

14.18 Vol.2 - Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.(10 litre capacity - White) Complete as per specification with all lead and lift and as per directions of engineer in charge of the work.

18.3 Vol.3 PWD - Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement Complete as per specification with all lead & lift and as per direction of Engineer in charge of the work

18.4 vol.3 PWD - Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, Complete as per specification with all lead & lift and directed by the Engineer- in-Charge.