Central Food Technological Research Institute Tender

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge including SS 300mm long door handle, lock and stopper etc..

Providing and fixing at all heights, levels & locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 confirming to IS 737 and dimension as per IS 2676 with charecteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with HEx cap headed self drilling / tapping stainless steel screws M6, 60mm long with 3mm EPDM seal wsher etc., all inclussive of labour, scaffolding, T&P and sundries etc complete as per direction of the Engineer-in-charge. 0.56mm, Aluminium troughed profile with center to center pitch of 200mm, depth of 32mm, overall profile width 1092mm, cover width 1000mm. Make: Namco / tata / cril

Providing and fixing of Pre-coated colour or mill finish Aluminium roofing Accessories 0.71mm thickness, alloy 31500 (IS designation) [(Aluminium Alloy (AA) 3004 (ISO designation)]. For Colour, coating coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6X60mm with 3mm thick EPDM seal and SS plan washer complete: Precoated / mill finish aluminium ridges plain (500 - 600mm) Make: Namco / tata / cril

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing in position Turbo ventilators of approved design including cutting the roof sheet to the requird size, sealing the gap with appropriate sealant, etc complete. Make: Namco

20 mm cement plaster of mix : 1:6 (1 cement: 6 M sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer Make: asian / Dulux / Berger

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats Make: asian / Dulux / Berger

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Make: asian / Dulux / Berger

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)

Dismantling of old wiring with switch board, LT Panel, Light Fitting etc. and depositing at action yard for 3 Numbers of building.

Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories & providing masonry enclosure with cover plate having locking arrangement & watering pipe of 2.1 metre long etc. with charcoal / coke and salt as required.(SS Bolt Nuts & Washers should be used).

Supplying and fixing of 25mm dia medium class PVC conduit along with accessories in surface/recess including cutting the wall & making good the same in case of recessed conduit as required.

Supplying and fixing of 32mm dia medium class PVC conduit along with accessories in surface/recess including cutting the wall & making good the same in case of recessed conduit as required.

Supplying and drawing 5 Runs x 10.0 Sq.mm. FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing 5 Runs x 6.0 Sq.mm. FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing 5 Runs x 4.0 Sq.mm. FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing 3 Runs x 6.0 Sq.mm. FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing 3 Runs x 4.0 Sq.mm. FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and fixing 63 A rating, 240/415 V, "C" curve, miniature circuit breaker suitable for inductive load of Four Pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Double Pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Four Pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing (4way) 4 + 12, Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supply, fixing of PVC / Metal Heavy duty wall mounting fan with remote on existig wall by using suitable hardwares with wiring connections etc. ready to use. MAKE : CROMPTON-HIGH FLO / BAJAJ / ALMONARD.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPNMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 415 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply, Installation, testing and commissioning of 4ft, 20/25W, LED tube light fitting with LED tube on wall with wiring connections etc. ready to use. Make : CROMPTON / PHILIPS / HAVELLS / BAJAJ.

Supply, Installation, testing and commissioning of 52" ceiling fan, (3Blades, 5 Star) including wiring the down rods of standard length (upto 30 cm) with 1.5 / 2.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Ceiling Fan Make : CROMPTON / USHA / HAVELLS / BAJAJ.

Supply, Installation, testing and commissioning of 300 mm sweep, industrial type, Exhaust fan with with 1.5 / 2.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.ready to use. Make : USHA / CROMPTON / ALMONARD / HAVELLS / BAJAJ / KHAITHAN.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings in the existing trench ( 75 cm deep) and re-filling etc. as required Make: APOLLO / JINDAL. 100mm dia.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings in the existing trench ( 75 cm deep) and re-filling etc. as required Make: APOLLO / JINDAL. 80mm dia.

Supply and fixing of 10” x 12” Teakwood Switch Board covered with 3 mm thick white hylem sheet and consisting of the following pre-wired, wiring with 4.0 / 2.5 sq. mm. copper wire, connectiing with existing wiring etc. for ready to use. a) 5/6A, Flush type, white colour One way Switch. Make : LISHA. - 2 Nos. b) 5/6A, Flush type, white colour, 3/5pin socket. Make : LISHA. - 2 Nos. c) 15/16A, Flush type, white colour, one way Switch. Make : LISHA. - 2 Nos. d) 15/16A, Flush type, white colour, 3/5pin socket. Make : LISHA. - 2 Nos. e) Flush type, white & Red colour indicator. Make : LISHA. - 1 No. f) 2 Pole, 16A, MCB. Make : ABB / HAVELLS. - 1 No.

Supply and fixing of busbar boxes of screwed flat cover of size 30"x25"x10" with copper bus-bars of 4Nos. of size 25mmx3mm with 10cm long using 8Nos. of busbar insulators at Pole & painting by 2 coats redoxide & two coats of enamel paint.

Supplying and fixing 40 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 40 A "C" curve, TPNMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply, installation, testing and commissioning LT distribution pannel board made out of 1.6 mm thick sheet steel, angle iron, base frame suitable for fixing pannel to wall with 50 mm x 50 mm x 4 mm size angle iron duly painted with two coats of powder coated pant (gray colour) over a coat of red oxide primer, pannel shall be fixed to wall / Floor with suitabe anchor bolts and nuts. The pannel shall be suitable for 2 Nos. separate compartment for their indipended out goings and the incoming & out goings for each supply shall be arranged in separate compartment of the pannel with indudual hinged with locking arrangement doors for each MCCB,s /MCB distribution chamber with in the compartment. The pannel shall be fitted with following fittings and acessories Note :- All incoming / outgoing armoured cables /submains shall be terminated with suitable size copper/aluminium lugs (for copper cables coppler lugs and for aluminium cables aluminium lugs) and armoured cable shall be provided with suitable size double compression glands (A) Campartment No. 1:- (a) copper bus bar with 40mm x 4 mm of 0.6 Mtrs. long with fire proof tape, mounted on bus bar insulators. - 4 Nos. (b) MCCB 4 pole, 200 amps, 35/36 KA, for incoming - 1 No. (c) MCCB 4 pole, 125 amps for out going - 1 No. (d) MCB, 4Pole, 63A for out going - 2 Nos. (e) MCB, 2Pole, 32A for out going - 2 Nos. (f) Panel mounted type Change over Switch of capacity 200A, 4Pole. - 1 No. (g) Wirng from bus bar to MCB with suitanle size copper conductor cable. (h) LED Phase indication lamps (RYB) - 6 Nos. (B) Campartment No. 2:- (a) copper bus bar with 50mm x 5 mm of 1Mtr. long with fire proof tape, mounted on bus bar insulators. - 4 Nos. (b) MCCB 4 pole, 400 amps, 35/36 KA, for incoming - 1 No. (c) MCCB 4 pole, 200 amps for out going - 1 No. (d) MCCB 4 pole, 100 amps for out going - 1 No. (e) MCB, 4Pole, 63A for out going - 2 Nos. (f) Wirng from bus bar to MCB with suitanle size copper conductor cable. (g) LED Phase indication lamps (RYB) - 3 Nos.

Supply, install, test and commissioning LT distribution pannel board made out of 1.6 mm thick sheet steel, angle iron, base frame suitable for fixing pannel to wall with 40 mm x 40 mm x 5 mm size angle iron duly painted with two coats of powder coated pant (gray colour) over a coat of red oxide primer, pannel shall be fixed to wall / floor with suitabe anchor bolts and nuts. The pannel shall be with indudual hinged with locking arrangement doors for each MCCB,s / MCB distribution chamber with in the compartment including connecting all incoming & out going cables, during connecing if any incoming / out going cables is need to be extended also included in the scope of work (cable for extension of connection will be provided by CFTRI) The pannel shall be fitted with following fittings and acessories Note :- All incoming / outgoing armoured cables /submains shall be terminated with suitable size copper/aluminium lugs (for copper cables coppler lugs and for aluminium cables aluminium lugs) and armoured cable shall be provided with suitable size double compression glands. Compartment: (a) copper bus bar with 40mm x 5 mm of 1Mtr. long with fire proof tape, mounted on bus bar insulators. - 4 Nos. (b) 200A, 36KA, 4Pole MCCB for incoming supply - 1 No. (c) 63 A,4P MCB for Outgoing - 2 Nos. (d) 32 A,2P MCB for Outgoing - 4 Nos. (e) Wirng from bus bar to MCB / MCCB with suitable size copper conductor cable (f) LED Phase indication lamps (RYB) - 3 Nos.

Supply of 3.5 Core x 95.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Supply of 3.5 Core x 400.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Supply of 3.5 Core x 35.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 95 sq. mm and upto 185 sq. mm.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 95 sq. mm and upto 185 sq. mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 185 sq. mm and upto 400 sq. mm.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply, installation, testing and commissioning of LT Air Circuit Breaker of 440V, AC, 50Hz, 800A, 4Pole, ICU 50KA fixed on suitable size LT Panel floor mounting type made out of 1.6mm sheet metal and angel iron base frame and stand minimum 1Mtr. above the ground level, duly painted with two coats of powder coated paint including provision of 100 x 10 mm size alluminium bus-bar - 8 Nos. (4+4) for connecting incoming and out going cables duly connected to ACB with suitable size alluminium bus-bar connectors complete including the following. Make : SCHNEIDER / L&T / SIEMENS. a) Voltmeter with selector switch - 1 No. b) Ameter with 5 CT's - 1 Set. c) Indicator lamps RYB - 1 Set.

Opening cable box of existing transformer, making provision for incerting new 3.5 core x 400 sq.mm. XLPE aluminium 1100V grade UG cable including connecting to existing terminal busbar with suitable size double compression gland and cable lugs, SS bolts, Nuts with double washers with complete all as specified and directed by Engineer in-charge.

Supplying and making end termination with brass Compression gland (Double compression glands) and Aluminium lugs for following 3.5C size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make of Alluminium Lugs and Brass Double compression gland. Glands : Dowells/Johnson. a) 3½ X 400 sq. mm (82mm)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm