Central Food Technological Research Institute Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 1,84,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CSIR_206855_2Bid Award Id
ViewTender No
E/CW/008/1066/2024-2025Tender Authority
Central Food Technological Research Institute ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
75
-
-
Providing and laying vitrified tiles in different sizes (minimum 10mm thick), with water absorption less than 0.08% and confirming to IS 15622, of approved brand and manufacture, in all colours and shade, laid with cement based high polymer modified quick set tile adhessive (water based) confirming to IS:15477, in average 6mm thickness, including grouting of joints (Payment for grouting of joints to be made seperately). Size of tile 600X600mm
360
-
-
Providing and laying vitrified tiles in different sizes (minimum 10mm thick), with water absorption less than 0.08% and confirming to IS 15622, of approverd make, in all colours and shade, in skirting, riser of steps, over 12mm thick bed of cment mortar 1:3 (1 cement : 3 M sand) jointing with grey cement slurry @ 3.3kg/Sqm including grouting the joints with white cement and matching pigments etc., complete. Size of tile 600X600mm
50
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
70
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (minimum 5mm thick), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 M sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete..
75
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (10mm thickness), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 M sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of the tile : 600X300mm
425
-
-
Taking out existing wooden door & window shutter, repair by cutting, painting etc.,and refixing of repaired door shutters to exisitng door frames, including replacment of hinges with screws, etc as required, all complete as per the direction of the Engineer-in-charge
26
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead
Of area 3 sq. metres and below
30
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
8
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix
24
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
50
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 M sand : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
33
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 M sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 M sand)
32
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 M sand : 3 graded stone aggregate 20 mm nominal size)
13
-
-
Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers
85
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1200
-
-
Providing and laying factory made Precast concrete solid blocks of 150mm/200mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level Cement mortar 1:6 (1 cement : 6 coarse sand)
36
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over modular kitchen cabinets, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red
Area of slab over 0.50 sqm
31
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
68
-
-
Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
20
-
-
Providing and fixing 12mm thick frameless toughned glass door shutter of approved brand and manufacturer, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc., for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc to be paid seperately)
14
-
-
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/copler (wherever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 & R2 profiles and 2.10mm for series R3 & R4 profiles confirming to EN:12608 in any shape colour and design duly reinforced with galvanised mild steel section made of required shape & size as per CPWD specifications, uPVC extruded glazing beads, interlocks and inline sash adapter (wherever required) of appropriate dimensions, EPDM gasket, hardware, SS 304 grade fastners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS:1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws ets,. Profile of frames sash and mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame, the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming CPWD specifications & directions of Engineer-in-charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by the Engineer-in-cgarge. Wire mesh/glazing of plain / toughned/laminated/ double glass/ unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid seperately. Three track three panels sliding wondows with two glazed and one wire mesh panel with aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (70mm & above) X (40mm & above) and both glazed and fly screen sash (25mm & above) X (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (height up to 1.20 meters)
26
-
-
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/copler (wherever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 & R2 profiles and 2.10mm for series R3 & R4 profiles confirming to EN:12608 in any shape colour and design duly reinforced with galvanised mild steel section made of required shape & size as per CPWD specifications, uPVC extruded glazing beads, interlocks and inline sash adapter (wherever required) of appropriate dimensions, EPDM gasket, hardware, SS 304 grade fastners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS:1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws ets,. Profile of frames sash and mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame, the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming CPWD specifications & directions of Engineer-in-charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by the Engineer-in-cgarge. Wire mesh/glazing of plain / toughned/laminated/ double glass/ unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid seperately. Casement windows double panel with fixed mullion with SS304 friction hinges as per size and weight of sash, multi point locking system zinc alloy (zamak) powder coated handles. Using R2 series with frame (39mm & above) X (39mm & above) & sash (39mm & above) X (60mm & above) and mullion (39mm and above) X (60m and above) height up to 1.20 meters.
10
-
-
Providing and fixing fly proof stainless steel grade 304 wire guage, to windows and clerestory windows using wire guage with average width of aperture 1.4mm in bith directions with wire of dia 0.50mm all complete. With 2nd class teak wood beading 62X19 mm
15
-
-
Providing and fixing glazing in aluminium/uPVC door, window, ventilator shutters and partitions etc., with EPDM rubber / neoprene gasket etc., complete as per the architectural drawings and the direction of Engineer-in-charge. With float glass panes of 5 mm thickness
36
-
-
Structural steel work rivetted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (12mm square Bright bars shall be used)
6500
-
-
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).
110
-
-
Providing & fixing false ceiling tiles below the roof pressed clay tile (Mangalore tile) of 15-20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).
110
-
-
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).
27
-
-
Dismantling of flushing cistern, water closets and wash basins of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
46
-
-
Providing and fixing white vitreous china wall mount type water closet (European type) with full stand concealed flush tank of 10 litre capacity, flush plates of approved design, flush gasket with fittings, anchor bolts of required dia and length, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid soft close plastic seat and lid
12
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tap
12
-
-
Providing and fixing kitchen sink without drain board including making all connections excluding cost of fittings Black quartz sink of size 600X450X200mm
4
-
-
Providing and fixing kitchen sink without drain board including making all connections excluding cost of fittings Black quartz sink of size 450X450X200mm
Make: Futura - FS 1816 NQ BLACK
6
-
-
Providing and fixing CP brass swan neck design sink cock of approved quality and colour. 15 mm nominal bore
10
-
-
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
25
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe
40mm dia
25
-
-
Providing and fixing PTMT grating of approved quality and colour. Circular type
100 mm nominal dia
50
-
-
Providing and fixing cPVC health faucet of approved design and coulor 15mm nominal dia
14
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15mm nominal bore with 45 cm length
50
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
50
-
-
Providing and fixing CP brass two way bib cock for fixing of health faucet. 15mm nominal bore
14
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore
Make: Hindware F400002
20
-
-
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
20
-
-
Providing and fixing stainless steel towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. Minimum length 600mm .
12
-
-
Providing and fixing stainless steel towel ring of circular shape 200 mm dia with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
24
-
-
Providing and fixing CP brass extension nipple (size 15mm X 50mm) of approved make and quality as per the Direction of Engineer-in-charge
50
-
-
Providing and fixing toilet paper holder C.P. brass
14
-
-
Providing and fixing pvc nahani trap of size 100X75mm
50
-
-
Providing and fixing two point diverter set including spout, overhead shower arm and three step rose, diverter plate, diverter handle and telescopic shower in bathrooms. 15mm nominal bore
12
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
14
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape 450x350 mm (outer dimensions)
12
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
20mm nominal dia pipes
260
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
25mm nominal dia pipes
130
-
-
Providing and fixing cpvc/gun metal gate valve with CI wheel of approved quality (screwed end) 25mm nominal bore
10
-
-
Providing, laying and jointing under ground drainage pipe using PVC pipes of 6 kgf/ sq.cm pressure capacity at suitable depth with required slope including testing of joints etc., complete 110 mm diameter
80
-
-
Providing and fixing PVC moulded fittings/accessories for PVC drain pipes including jointing with PVC cement solvent, etc complete. PVC Tee without door - 110mm dia
60
-
-
Providing and fixing PVC moulded fittings/accessories for PVC drain pipes including jointing with PVC cement solvent, etc complete. PVC Bend without door - 110mm dia
65
-
-
Providing and fixing PVC moulded fittings/accessories for PVC drain pipes including jointing with PVC cement solvent, etc complete. PVC Bend with door - 110mm dia
20
-
-
Providing and fixing unplasticized PVC clips of approved design to PVC rain water pipes by means of 50X50X50mm hard wood plugs, screwed with MS screws of required length, including cutting brick works and fixing in cement mortar 1:4 (1 cement : 4 M sand) and making good the wall etc complete. 110mm dia
50
-
-
Supplying & fixing at site Kitchen cabinet 600mm deep, using of 18mm thick Boiling Water Proof (BWP) ply of Green or Marino as per the design approved by the Engineer-in-charge. The cabinet inner shall be finished with 0.80mm thick machine pressed white laminate and edge banding. Backing sheet shall be 12.00mm thick BWP plywood finished with white laminate on both side. Top ply shall be 18mm thick. All the drawers and shutters shall be finished with 1.00mm thick laminate and edge banding using Green laminate or Marino laminate With the following specifications & fittings:
Handles : stainless steel 8" of approved design
Hinges : Hettich - soft close Telescopic channels : Hettich - soft close
Tandam box : Hettich - stainless steel - 5 nos Skirting : 4" PVC bush without covering
17
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
70
-
-
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, etc complete.
2500
-
-
Applying priming coats with primer of approved brand and manufacturer, having low VOC content. With water thinnablecement primer on wall surface having VOC content less than 50gms/litre
2500
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC content less than 50gms/litre of approved brand and manufacturer, including applying additional coats wherever required to achieve even shade and colour. Two coats
2500
-
-
Finishing walls with premium acrylic smooth exterior paint of required shade: New work (Two or more coats applied @ 1.43ltr/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90lts/10 sqm)
1250
-
-
Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade: One or more coats on old work
350
-
-
French spirit polishing: Two coats
300
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
60
-
-
Supplying, Installation, Testing & Successful Commissioning of following range and type of LED Light fittings (light colour as per choice of Engineer Incharge) & IP65 Focus Light complete with internal wiring, 1 metre length of any standard make rated 3 core copper wire etc.,, ready to use suitable to fix on wall / ceiling and to work with 230V Single Phase, 50Hz AC Supply. The end wire from the fitting shall be terminated to a 2 Way 5Amps PVC Connector for a) to c) and d) shall be terminated in Item No:xyz. 5 Watts LED Batten Light
LED Fitting Make: Philips / Wipro / Havells / Bajaj / Syska.
30
-
-
Supplying, Installation, Testing & Successful Commissioning of following range and type of LED Light fittings (light colour as per choice of Engineer Incharge) & IP65 Focus Light complete with internal wiring, 1 metre length of any standard make rated 3 core copper wire etc.,, ready to use suitable to fix on wall / ceiling and to work with 230V Single Phase, 50Hz AC Supply. The end wire from the fitting shall be terminated to a 2 Way 5Amps PVC Connector for a) to c) and d) shall be terminated in Item No:xyz. 20 Watts 4 Feet LED Batten Llight LED Fitting Make: Philips / Wipro / Havells / Bajaj / Syska.
15
-
-
Supplying, Installation, Testing & Successful Commissioning of following range and type of LED Light fittings (light colour as per choice of Engineer Incharge) & IP65 Focus Light complete with internal wiring, 1 metre length of any standard make rated 3 core copper wire etc.,, ready to use suitable to fix on wall / ceiling and to work with 230V Single Phase, 50Hz AC Supply. The end wire from the fitting shall be terminated to a 2 Way 5Amps PVC Connector for a) to c) and d) shall be terminated in Item No:xyz. 36 Watts 4 Feet LED Batten Light
LED Fitting Make: Philips / Wipro / Havells / Bajaj / Syska.
60
-
-
Supplying, Installation, Testing & Successful Commissioning of following range and type of LED Light fittings (light colour as per choice of Engineer Incharge) & IP65 Focus Light complete with internal wiring, 1 metre length of any standard make rated 3 core copper wire etc.,, ready to use suitable to fix on wall / ceiling and to work with 230V Single Phase, 50Hz AC Supply. The end wire from the fitting shall be terminated to a 2 Way 5Amps PVC Connector for a) to c) and d) shall be terminated in Item No:xyz. 50 Watts LED Focus Light
LED Fitting Make: Philips / Wipro / Havells / Bajaj / Syska.
15
-
-
Supplying, Testing, Successful Laying inside suitable size C-PVC Pipe / Bend / Collar and Commissioning of 4 x 4.0 sq.mm PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade on wall / surface / floor as required using suitable size saddles of 1mm thick.
UG Cable Make: CCI / Polycab / Havells / Universal / KEI
140
-
-
Supplying and making end termination with brass compression gland and aluminium lugs (bulltet / flat) for 4 x 4.0 sq.mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Aluminium Lugs and Brass Compression Gland Make: Dowells / Comet / Braco. Note: Each means all lugs for one end of the UG Cable.
10
-
-
Supplying, Fixing and Servicing with suitable size water proof electrical grade PVC Box including hylem sheet of suitable size, 4way stud for termination, fixing suitable clamps, hardwares, electrical wiring connecitons etc. as required. (box should be fixed at pole / wall for suitable height.) PVC Box Make: Sintex / Joe Geetha / Modi
6
-
-
Supply, Installation, Testing and Successful Commissioning of 8” x 10” Teakwood Switch Board covered with 3 mm thick hylem sheet and consisting of the following non-modular items and pre-wired with 4 sq.mm FRLS copper wire for Phase, Neutral and Earth and ready for use to fix on the wall/recess using neccesssary hardwares as required. a) 15Amps, 5 Pin Flush Type Socket - 2 Nos.
b) 15 Amps Flush Type Switch - 2 Nos.
c) 5 Amps Flush Type Indicator - 1 No.
d) 20 Amps DP MCB - 1 No.
Make: a) to c) : LISHA / GM / L&T / Indo-Asian; d) L&T / ABB / Schneider / Havels.or Any ISI approved by the Engineer In-Charge. Wire: Havels / V-Guard / Finolex / Standard
10
-
-
Supply, Installation, Testing and Successful Commissioning of 12 Inch Dia, 300 mm sweep, industrial type ready to use Exhaust Fan having Bird Cage with 1.5 FRLS PVC insulated, copper conductor, single core cable and to fix with required size of MS frame duly painted with one coat of primer and 2 coats of paint, suitable hardwares etc., and provide one no. of 3 Pin 5/6 Amps ISI make Socket along with Gangbox and 3 Pin 5/6A Amps ISI make Plugtop as required. Exhaust Fan Make : Crompton / Rally / Usha / Havells / Bajaj / Almonard / Khaitan. Other Items Make: LISHA / GM / L&T / Indo-Asian.
10
-
-
Supply, Installation, Testing and Successful Commissioning of 9 Inch Dia, 225mm / 230mm sweep, industrial type ready to use Exhaust Fan having Bird Cage with 1.5 FRLS PVC insulated, copper conductor, single core cable and to fix with required size of MS frame duly painted with one coat of primer and 2 coats of paint, suitable hardwares etc., and provide one no. of 3 Pin 5/6 Amps ISI make Socket along with Gangbox and 3 Pin 5/6A Amps ISI make Plugtop as required. Exhaust Fan Make : Same as Item No: 81.
8
-
-
Supplying, Installation, Testing and Successful Commissioning of 10 Module, PVC Modular Box complete set in surface / recess etc. as required.
10
-
-
Supplying, Installation, Testing and Successful Commissioning of Single Pole, 20 Amps, "C" Curve Mini MCB, 10kA on the existing Semi / Full modular PVC Switch Box / Cover including connections etc. as required.
10
-
-
Supply, Installation, Testing and Successful Commissioning of 10 Module, PVC Modular PVC Box, Cover Plate etc., on wall with suitable hardwares etc., pre-wired with 4.0 sq.mm single core copper wire for Phase and Neutral and with 2.5 sq.mm single core copper wire for Earthing and consiting of 1 x 20 Amps, 2 Pole, "C" Curve, 10kA Mini MCB, 1 x 5/6 Amps Indicator, 2 x 15/16 Amps Switches and 2 x 5 Pin 15/16 Amp Sockets.
8
-
-
Labour charges for digging 8 feet of depth below ground level, including hard soil, rocks etc.,if any encountered, fixing the Item No:6, refilling of soil etc., as required. (along with charcoal / coke and salt from S.No:107 as required, already estimated under S.No.107).
4
-
-
Dismantling & taking down olf ceiling fans, light fixtures with wiring after carefully disconnecting the incoming electrical input and depositing all the old materials in an organised manner to the Institutes' Auction / E & MM Store Yard or as per the advise of the Electrical Officer In-Charge of the Project without any damage.
1
-
-
Removal of existing lighting control gangbox, light fixtures, exhaust fans etc., along with electrical pipe and wiring after duly disconnecting the incoming electrical power from UNU Students Block without any damage as all these removed items are to be re-used as mentioned and estimated in Item No:89.
1
-
-
Successfull Refixing and Commissioning of electrical pipes, wiring, gangbox, fixtures, exhaust fan etc., which are removed as in Item No:88 to the respective UNU Students Block and to reconnect the incoming electrical line as required using suitable hardwares etc.,
1
-
-
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model: Legrand / Schneider / Crabtree / Leon / L&T. Group A
40
-
-
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model: Legrand / Schneider / Crabtree / Leon / L&T. Group B
18
-
-
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model: Legrand / Schneider / Crabtree / Leon / L&T. Group C
18
-
-
Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Same as Item No: 92.
2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire
55
-
-
Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Same as Item No: 92.
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
120
-
-
SWring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Same as Item No: 92.
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
90
-
-
SWring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Same as Item No: 92.
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
80
-
-
Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required. Make: Same as Item No: 92
5/6 A switch
30
-
-
Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required. Make: Same as Item No: 92
6 pin 5/6 A socket outlet
30
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Make: Same as Item No: 92
16
-
-
Supplying and fixing 4 way (4 + 12), Double Door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator). Make: Legrand / Schneider / ABB / L&T.
2
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 100.
10 A, 240V, Single Pole
10
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 100.
32 A, 240V, Single Pole
6
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 100.
32 A, 240V, Double Pole
10
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 100. 32 A, 415V, Triple pole and neutral (Four Pole)
6
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB) having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 100
25A
8
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB) having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 100
40A
8
-
-
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. Note: Masonry enclosure size is 1.5 Feet x 1.5 Feet x 1.5 Feet. As per IS 3043, charcoal/ coke and salt should be refilled with 50 Kg each per earthpit. The copper plate has to be tinned, connected copper flats have to be brazed and only SS nut, bolts and washers to be used.
4
-
-
Providing and laying earth connection from earth electrode with 4.00mm dia copper wire in 15mm G.I. pipefrom earth electrode including connection with copper thimble excavation and refilling as required.
80
-
-
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required.
20
-
-
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
2
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerence as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required. Ceiling Fan Make: atomberg / orient electric, / Havells / Kuhl / Crompton / Bajaj. Note: a) The fan should have an connectivity option to control the motor speed through Mobile Phone App of both Android & iPhone .
b) The fan should have Warm White LED downlight & control for the same should be available in the supplied remote.
c) For the chosen make by the contractor from the choice of brand given as in above, the fan colour & model shall be as per the choice of the Engineer Incharge.
30
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements